SR802 - SR815 CREAT BY ART 8.0AMPS. Schottky Barrier Rectifiers DO-201AD Features Low power loss, High efficiency. High current capability, Low VF. High reliability High surge current capability. Epitaxial construction. Guard-ring for transient protection. For use in low voltage, high frequency inverter, free wheeling, and polarity protection application Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Cases: DO-201AD molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode High temperature soldering guaranteed: 260℃/10 seconds /.375", (9.5mm) lead lengths at 5 lbs, (2.3kg) tension Weight: 1.10 grams Ordering Information (example) Part No. SR802 Package Packing DO-201AD 500 / AMMO box INNER TAPE Packing code Green Compound Packing code 52mm A0 A0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage VRRM SR 802 20 Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 105 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 90 100 150 V Maximum Average Forward Rectified Current IF(AV) 8 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 150 A Type Number Maximum Instantaneous Forward Voltage (Note 1) @8A Maximum DC Reverse Current at Rated DC Blocking Voltage @ TA=25 ℃ @ TA=100 ℃ @ TA=125℃ Typical Junction Capacitance (Note 2) Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range Symbol VF SR 803 30 SR 804 40 SR 805 50 SR 806 60 SR 809 90 SR 810 100 SR 815 150 0.55 0.70 0.92 0.5 IR 15 500 RθJA TJ TSTG 1.02 10 - V mA 5 270 165 pF O 40 - 65 to + 125 V 0.1 Cj Units - 65 to + 150 - 65 to + 150 Note1: Pulse Test with PW=300 usec, 1% Duty cycle Note2: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:F12 C/W O C O C RATINGS AND CHARACTERISTIC CURVES (SR802 THRU SR815) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT (A) SR805 - SR815 8 6 SR802 - SR804 4 RESISTIVE OF INDUCTIVE LOAD WITH HEATSINK 2 0 0 50 100 150 PEAK FORWARD SURGE CURRENT (A) 10 FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 150 8.3ms Single Half Sine Wave JEDEC Method 125 100 75 50 25 1 10 100 NUMBER OF CYCLES AT 60 Hz LEAD TEMPERATURE (oC) FIG. 4- TYPICAL REVERSE CHARACTERISTICS FIG. 3- TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT (A) 100 SR802-SR804 10 SR805-SR806 SR815 SR809-SR810 1 TA=25oC Pulse Width=300us 1% Duty Cycle 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 TA=75℃ 0.1 TA=25℃ 0.01 0 20 40 60 80 100 120 FIG. 6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS 100 10000 TRANSIENT THERMAL IMPEDANCE (℃/W) TA=25℃ 10 SR805-SR806 SR802-SR804 1 SR809-SR815 100 0.1 1 10 REVERSE VOLTAGE (V) 140 PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) FIG. 5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 1 0.001 1.2 FORWARD VOLTAGE (V) 1000 TA=125℃ 100 0.1 0.01 0.1 1 10 100 T, PILSE DURATION. (sec) Version:F12 Ordering information Part No. SR8xx (Note) Package Packing INNER TAPE Packing code Green Compound Packing code DO-201AD 500 / AMMO box 52mm A0 A0G DO-201AD 1.25K / 13" Reel 52mm R0 R0G DO-201AD 500 / Bulk packing B0 B0G DO-201AD 500 / Bulk packing X0 X0G Note: "xx" is Device Code from "02" thru "15". AXIAL LEAD TAPING SPECIFICATIONS Outline DO-201AD A ±0.5 10 B ±1.5 52.4 Z MAX 1.2 T ±0.4 6 E ∣L1-L2∣ MAX MAX 0.8 1 D 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 9.0 1.2 4.0 1.6 D1 ±0.3 85.7 D0 ±0.4 16.6 Unit (mm) W ±1.0 76 Dimensions DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YWW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 5.00 5.60 0.197 0.220 B 1.20 1.30 0.048 0.052 C 25.40 - 1.000 - D 8.50 9.50 0.335 0.375 E 25.40 - 1.000 -