UTC-IC DTB123YG-AE3-R

UNISONIC TECHNOLOGIES CO., LTD
DTB123Y
PNP SILICON TRANSISTOR
DIGITAL TRANSISTORS
(BUILT- IN BIAS RESISTORS)
„
FEATURES
* Built-in bias resistors that implies easy ON/OFF applications.
* The bias resistors are thin-film resistors with complete isolation to
allow positive input.
„
EQUIVALENT CIRCUIT
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
DTB123YL-AE3-R
DTB123YG-AE3-R
DTB123YL-AL3-R
DTB123YG-AL3-R
„
Package
SOT-23
SOT-323
Pin Assignment
1
2
3
G
I
O
G
I
O
Packing
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
1 of 3
QW-R220-019,B
DTB123Y
„
PNP SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage
VCC
-50
V
Input Voltage
VIN
-12 ~ +5
V
Output Current
IC
-500
mA
Power Dissipation
PD
200
mW
Junction Temperature
TJ
+150
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
ELECTRICAL SPECIFICATIONS (Ta=25°C, unless others specified)
PARAMETER
SYMBOL
VIN(OFF)
Input Voltage
VIN(ON)
Output Voltage
VOUT(ON)
Input Current
IIN
Output Current
IOUT(OFF)
DC Current Gain
hFE
Input Resistance
R1
Resistor Ratio
R2/R1
Transition Frequency (Note)
fT
Note: Transition frequency of the device
TEST CONDITIONS
VCC =-5V, IOUT =-100μA
VOUT =-0.3V, IOUT =-20mA
IOUT/IIN =-50mA/-2.5mA
VIN=-5V
VCC =-50V, VIN =0V
VOUT =-5V, IOUT =-50mA
VCE =-10V, IE =50mA, f=100MHz
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
MAX
-0.3
UNIT
-0.1
-0.3
-3.0
-0.5
V
mA
μA
2.2
4.5
200
2.86
5.5
KΩ
-2
56
1.54
3.6
V
MHz
2 of 3
QW-R220-019,B
DTB123Y
„
PNP SILICON TRANSISTOR
TYPICAL CHARACTERISTICS
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R220-019,B