UNISONIC TECHNOLOGIES CO., LTD U74LVC86A CMOS IC QUAD 2-INPUT EXCLUSIVE OR GATE DESCRIPTION The U74LVC86A is a quad 2-input exclusive OR gate which performs the function Y=A ⊕ B or Y=AB + AB . It is designed for 1.2V to 3.6V operation. FEATURES * Wide supply voltage range from 1.2V to 3.6V * Max tpd of 4.6ns at CL=50pF, VCC=3.3V * Up to 5.5V inputs accept voltages * Low power consumption, ICC = 1 μA (Max.) * Compatible with TTL families ORDERING INFORMATION Ordering Number Lead Free U74LVC86AL-S14-R U74LVC86AL-S14-T U74LVC86AL-P14-R U74LVC86AL-P14-T Halogen Free U74LVC86AG-S14-R U74LVC86AG-S14-T U74LVC86AG-P14-R U74LVC86AG-P14-T www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package Packing SOP-14 SOP-14 TSSOP-14 TSSOP-14 Tape Reel Tube Tape Reel Tube 1 of 6 QW-R502-783.A U74LVC86A CMOS IC PIN CONFIGURATION F PIN DESCRIPTION PIN 1, 4, 9, 12 2, 5, 10, 13 3, 6, 8, 11 7 14 SYMBOL 1A-4A 1B-4B 1Y-4Y GND VCC FUNCTION Data inputs Data inputs Data outputs Ground (0V) Positive supply voltage B L H L H OUTPUT Y L H H L FUNCTION TABLE (EACH GATE) INPUTS A L L H H LOGIC SYMBOL (ONE GATE) LOGIC DIAGRAM (ONE GATE) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-783.A U74LVC86A CMOS IC ABSOLUTE MAXIMUM RATING (TA =25°C , unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS UNIT Supply Voltage VCC -0.5 ~ 6.5 V Input Voltage VIN -0.5 ~ 5.5 V Output Voltage (any output in the high or low state) VOUT -0.5 ~ +VCC+0.5 V Input Clamp Current IIK -50 mA Output Clamp Current IOK -50 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±100 mA Power Dissipation TA=-40°C to +125°C PD 500 mW Storage Temperature TSTG -65 ~ +150 °C Notes: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL θJA RATING 115 UNIT °C/W RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC High-Level Input Voltage VIH Low-Level Input Voltage VIL Input Voltage Output Voltage VIN VOUT Input Transition Rise or Fall Rate Δt/Δv Operating Temperature TEST CONDITIONS Max. speed performance Low-voltage applications VCC = 1.2V VCC = 1.65V ~ 1.95V VCC = 2.3V ~ 2.7V VCC = 2.7V ~ 3.6V VCC = 1.2V VCC = 1.65V ~ 1.95V VCC = 2.3V ~ 2.7V VCC = 2.7V ~ 3.6V 0 0 VCC=1.2 ~ 2.7V VCC=2.7 ~ 3.6V TA UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 2.7 1.2 VCC 0.65 × VCC 1.7 2.0 -40 MAX 3.6 3.6 UNIT V V GND 0.35 × VCC 0.7 0.8 5.5 VCC 20 10 +85 V V V ns/V °C 3 of 6 QW-R502-783.A U74LVC86A CMOS IC ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITIONS MIN IOH = -100μA, VCC = 1.65V ~ 3.6V VCC - 0.2 VI = VIH or VIL IOH = -4mA, VCC = 1.65V 1.29 VI = VIH or VIL IOH = -8mA, VCC = 2.3V 1.9 VI = VIH or VIL High-Level Output Voltage VOH IOH = -12mA, VCC = 2.7V 2.2 VI = VIH or VIL IOH = -18mA, VCC = 3.0V 2.4 VI = VIH or VIL IOH = -24mA, VCC = 3.0V 2.3 VI = VIH or VIL IOH = 100μA, VCC = 1.65V ~ 3.6V VI = VIH or VIL IOH = 4mA, VCC = 1.65V, VI = VIH or VIL IOH = 8mA, VCC = 2.3V, Low-Level Output Voltage VOL VI = VIH or VIL IOH = 12mA, VCC = 2.7V, VI = VIH or VIL IOH = 24mA, VCC = 3.0V, VI = VIH or VIL VIN = 5.5V or GND, Input Leakage Current II(LEAK) VCC = 3.6V VIN = VCC or GND, IOUT = 0, Quiescent Supply Current ICC VCC = 3.6V One input at VCC – 0.6V, Additional quiescent Supply other inputs at VCC or GND, Δ ICC Current IOUT = 0, VCC = 2.7V ~ 3.6V Input Capacitance CIN VIN = VCC or GND, VCC=3.3V Note: 1. All typical values are at VCC = 3.3 V, TA = 25 °C SYMBOL TYP MAX UNIT V VCC 0.1 0.24 V 0.3 0.4 0.55 ±0.1 ±1 μA 0.1 1 μA 5 500 μA 5.0 pF SWITCHING CHARACTERISTICS PARAMETER SYMBOL Propagation delay from input (A or B) to output (Y) tPLH/tPHL TEST CONDITIONS VCC = 1.2V, CL = 50 pF, RL = 500Ω VCC = 1.8V ±0.15V, CL = 30 pF, RL = 1KΩ VCC = 2.5V ±0.2V, CL = 50 pF, RL = 500Ω VCC = 2.7V, CL = 50 pF, RL= 500Ω VCC = 3.3 ±0.3V, CL = 30pF, RL= 500Ω MIN 1 1 1 1 TYP 11 4.1 2.9 2.8 2.5 MAX UNIT 9.4 7.1 5.4 4.4 ns Note: 1. All typical values are at VCC = 3.3 V, TA = 25 °C OPERATING CHARACTERISTICS PARAMETER Power Dissipation Capacitance Per Gate SYMBOL TEST CONDITIONS Cpd VCC = 3.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 28 UNIT pF 4 of 6 QW-R502-783.A U74LVC86A CMOS IC TEST CIRCUIT AND WAVEFORMS VCC 1.8V 2.5V 2.7V 3.3V Input VIN VCC VCC 2.7V 3.3V tR, tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns TEST tPLH/tPHL S1 Open VM VLOAD CL RL VCC/2 VCC/2 1.5V 1.5V 2 × VCC 2 × VCC 6V 6V 30pF 50pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω VIN Input VM VM 0V tPHL tPLH VOH Output VM VM VOL tPHL tPLH VOH Output VM VM VOL Notes: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-783.A U74LVC86A CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-783.A