UNISONIC TECHNOLOGIES CO., LTD U74ACT86 CMOS IC QUAD EXCLUSIVE OR GATE DESCRIPTION The U74ACT86 consists of four EXCLUSIVE OR GATE it provides the function Y=A♁B, the device is designed to interface directly High Speed CMOS systems with TTL, NMOS and CMOS output voltage levels. FEATURES * Operation voltage range: 4.5~5.5V * Low power dissipation: ICC=2µA(Max) * High noise immunity * Compatible with TTL output *Pb-free plating product number: U74ACT86L ORDERING INFORMATION Ordering Number Normal Lead Free Plating U74ACT86-D14-T U74ACT86L-D14-T U74ACT86-S14-T U74ACT86L-S14-T U74ACT86-S14-R U74ACT86L-S14-R U74ACT86-P14-T U74ACT86L-P14-T Package Packing DIP-14 SOP-14 SOP-14 TSSOP-14 Tube Tube Tape Reel Tube www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd 1 of 4 QW-R126-007.B U74ACT86 CMOS IC PIN CONFIGURATION 1A 1 14 VCC 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y FUNCTION TABLE (each gate) INPUT A L L H H B L H L H OUTPUT Y L H H L LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R126-007.B U74ACT86 CMOS IC ABSOLUTE MAXIMUM RATINGS (unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~7 V Input Voltage VIN -0.5~ VCC+0.5 V DC Output Voltage VOUT -0.5~VCC+0.5 V Input Clamp Current (ViN<0) IIK ±20 mA Output Clamp Current (VOUT<0) IOK ±20 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±200 mA Storage Temperature TSTG -65 ~ +150 ℃ Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL RATING UNIT Supply Voltage VCC 4.5 ~ 5.5 V Input Voltage Output Voltage Input Transition Rise or Fall Rate Operating Temperature VIN VOUT tR, tF TA 0 ~ VCC 0 ~ VCC 8 -55 ~ +125 V V ns/V ℃ STATIC CHARACTERISTICS SYMBOL TEST CONDITIONS MIN TYP High-Level Input Voltage PARAMETER VIH VCC=4.5V~5.5V, VOUT=0.1V or VCC- 0.1V 2.0 1.5 Low-Level Input Voltage VIL VCC=4.5V~5.5V, VOUT=0.1V or VCC- 0.1V VCC=4.5V, IOH=-50µA VCC=5.5V, IOH=-50µA VCC=4.5V, IOH=-24mA VCC=5.5V, IOH=-24mA VCC=4.5V, IOL=50µA VCC=5.5V, IOL=50µA VCC=4.5V, IOL=24mA VCC=5.5V, IOL=24mA High-Level Output Voltage VOH Low-Level Output Voltage Input Leakage Current VOL II(LEAK) Quiescent Supply Current IQ VCC=5.5V, VIN=3.4V;other input at VCC or GND; IOUT=0 Input Capacitance CIN VCC=5.0V, VIN=VCC or GND V 0.001 0.001 0.1 0.1 0.36 0.36 V ±0.1 µA 2 µA V 0.6 mA 5 pF DYNAMIC CHARACTERISTIC (input tR = tF =3ns, TA=25℃) PARAMETER Propagation Delay Time V 0.8 VCC=5.5V, VIN=VCC or GND, IOUT=0 ∆IQ UNIT 1.5 4.49 5.49 VCC=5.5V, VIN=5.5V or GND Additional Quiescent Supply Current 4.4 5.4 3.86 4.86 MAX SYMBOL tPLH tPHL TEST CONDITION VCC =5.0V±0.5V, CL =50pF, RL =500Ω MIN TYP MAX UNIT 1.5 5.0 9.5 ns MIN TYP 30 MAX UNIT pF OPERATING CHARACTERISTIC PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITION Cpd VCC =5.0V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R126-007.B U74ACT86 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. 3ns 3ns 90% 2.5 V Input 10% 5V 2.5 V GND tPLH tPHL 1/2 * VCC 1/2 * VCC Output Output 1/2 * VCC tPHL 1/2 * VCC tPLH UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R126-007.B