UTC-IC UJ0100

UNISONIC TECHNOLOGIES CO., LTD
UJ0100
Preliminary
JFET
LOW-FREQUENCY
GENERAL-PURPOSE
AMPLIFIER APPLICATIONS
„
FEATURES
* Ideal For Potentiometers
* Analog Switches
* Low Frequency Amplifiers
* Constant Current Supplies
* Impedance Conversion
„
ORDERING INFORMATION
Ordering Number
Package
Lead Free
Halogen Free
UJ0100L-AE2-R
UJ0100G-AE2-R
SOT-23-3
Note: Pin Assignment: G: Gate D: Drain S: Source
„
Pin Assignment
1
2
3
D
S
G
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
1 of 3
QW-R203-044.a
UJ0100
„
Preliminary
JEET
ABSOLUTE MAXIMUM RATINGS (TA =25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Drain to Source Voltage
VDSS
30
V
Gate to Source Voltage
VGSS
-30
V
Gate Current
IG
10
mA
Drain Current
ID
20
mA
Power Dissipation
PD
200
mW
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
OFF CHARACTERISTICS
Gate to Drain Breakdown Voltage
Drain-Source Leakage Current
Gate-Source Leakage Current
ON CHARACTERISTICS
Gate Cutoff Voltage
Drain-Source On-State Resistance
Forward Transfer Admittance
DYNAMIC PARAMETERS
Input Capacitance
Reverse Transfer Capacitance
SYMBOL
BVGDS
IDSS
IGSS
IG=-10µA
VDS=10V,VGS=0V
VGS=-20V
VGS(OFF)
RDS(ON)
|YFS|
VDS=10V, ID=1µA
VDS=10mV, VGS=0V
VDS=10V, VGS=0V, f =1MHz
CISS
CRSS
VDS=10V,VGS=0V,f =1MHz
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
MIN
TYP
-30
0.6
2.5
MAX UNIT
2.5
-1.0
-1
250
6.0
5
1.5
-4
V
mA
nA
V
Ω
mS
pF
pF
2 of 3
QW-R203-044.a
UJ0100
Preliminary
JEET
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R203-044.a