UNISONIC TECHNOLOGIES CO., LTD TIP102 NPN SILICON TRANSISTOR NPN EPITAXIAL TRANSISTOR DESCRIPTION The UTC TIP102 is designed for using in general purpose amplifier and switching applications. FEATURES * Low VCE(SAT) * High Current Gain * Complementary to TIP107 ORDERING INFORMATION Ordering Number Lead Free Halogen Free TIP102L-TN3-R TIP102G-TN3-R www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd Package TO-252 Pin Assignment 1 2 3 B C E Packing Tape Reel 1 of 4 QW-R209-025.A TIP102 NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (TC=25°C) PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage DC Collector Current Pulse UNIT V V V A IC A ICP A Base Current DC IB 1 Collector Power Dissipation PC 80 W Junction Temperature TJ 150 °C Storage Temperature TSTG -65~+150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCBO VCEO VEBO RATINGS 100 100 5 8 15 ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified) PARAMETER Collector-Emitter Sustaining Voltage Collector-Base Cut-Off Current Collector-Emitter Cut-Off Current Emitter-Base Cut-Off Current ON CHARACTERISTICS DC Current Gain SYMBOL VCEO(SUS) ICBO ICEO IEBO hFE1 hFE2 Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter ON Voltage SMALL-SIGNAL CHARACTERISTICS Output Capacitance VBE(ON) COB TEST CONDITIONS IC=30mA, IB=0A VCB=100V, IE=0A VCE=50V, IB=0A VEB=5V, IC=0A MIN 100 VCE=4V, IC=3A VCE=4V, IC=8A IC=3A, IB=6mA IC=8A, IB=80mA VCE=4V, IC=8A 1000 200 VCB=10V, IE=0A, f=0.1MHZ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP MAX UNIT V µA 50 µA 50 mA 2 20000 2 2.5 2.8 V V V 300 pF 2 of 4 QW-R209-025.A TIP102 NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS 0µ 10 s C D Collecter Current, IC (mA) s 5m UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R209-025.A TIP102 NPN SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R209-025.A