UNISONIC TECHNOLOGIES CO., LTD UT136F/G Preliminary TRIAC TRIACS DESCRIPTION Passivated triacs in a plastic envelope, suitable for surface mounting, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching. 1 TO-252 SYMBOL MT2 1 TO-220 G MT1 ORDERING INFORMATION Ordering Number Lead Free Halogen Free UT136FL-x-TA3-R UT136FP-x-TA3-R UT136GL-x-TA3-R UT136GP-x-TA3-R UT136FL-x-TN3-R UT136FP-x-TN3-R UT136GL-x-TN3-R UT136GP-x-TN3-R www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package TO-220 TO-220 TO-252 TO-252 Pin Assignment 1 2 3 MT1 MT2 G MT1 MT2 G MT1 MT2 G MT1 MT2 G Packing Tube Tube Tape Reel Tape Reel 1 of 3 QW-R401-021.Ca UT136F/G Preliminary TRIAC ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT UT136F/G-5 500 (Note 2) Repetitive Peak Off-State Voltages VDRM V UT136F/G-6 600 (Note 2) UT136F/G-8 800 RMS On-State Current Full Sine Wave, Tmb≤107°C IT(RMS) 4 A Non-Repetitive Peak On-State Current t = 20ms 25 A ITSM (Full Sine Wave, TJ=25°C Prior To Surge) t = 16.7 ms 27 I2t For Fusing (t =10ms) I2t 3.1 A2s T2+ G+ 50 Repetitive Rate Of Rise Of On-State T2+ G50 dIT/dt Current After Triggering ITM =6A, IG =0.2A, A/μs T2- G50 dIG/dt=0.2A/μs T2- G+ 10 Peak Gate Voltage VGM 5 V Peak Gate Current IGM 2 A Peak Gate Power PGM 5 W Average Gate Power (Over Any 20ms Period) PG(AV) 0.5 W Junction Temperature TJ 125 °C Storage Temperature TSTG -40 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Although not recommended, off-state voltages up to 800V may be applied without damage, but the traic may switch to the on-state. The rate of rise of current should not exceed 3A/μs. THERMAL DATA PARAMETER Junction to Ambient SYMBOL TO-220 TO-252 RATINGS 60 75 θJA UNIT K/W STATIC CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS T2+G+ T2+GT2-GT2-G+ T2+G+ T2+GT2-GT2-G+ Gate Trigger Current IGT VD=12V, IT=0.1A Latching Current IL VD=12V, IGT=0.1A Holding Current On-State Voltage IH VT Gate Trigger Voltage VGT VD=12V, IGT=0.1A IT=5A VD=12V, IT=0.1A VD=400V, IT=0.1A, TJ=125°C VD=VDRM(max), TJ=125°C Off-State Leakage Current ID UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 0.25 TYP 5 8 11 30 7 16 5 7 5 1.4 0.7 0.4 0.1 MAX UT136F UT136G 25 50 25 50 25 50 70 100 20 30 30 45 20 30 30 45 15 30 1.70 1.5 0.5 UNIT mA mA mA V V V mA 2 of 3 QW-R401-021.Ca UT136F/G Preliminary TRIAC DYNAMIC CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER Critical Rate Of Rise Of Off-State Voltage Critical Rate Of Change Of Commutating Voltage Gate Controlled Turn-On Time SYMBOL dVD/dt dVcom/dt tgt TEST CONDITIONS VDM=67% VDRM(max), TJ=125°C, exponential waveform, gate open circuit VDM=400V, TJ=95°C, IT(RMS)=4A, dIcom/dt=1.8A/ms, gate open circuit ITM=6A, VD=VDRM(max), IG=0.1A, dIG/dt=5A/μs MIN TYP MAX UNIT UT136F UT136G 50 200 250 V/μs 10 50 V/μs 2 μs UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R401-021.Ca