UNISONIC TECHNOLOGIES CO., LTD BT150 SCR SCRS DESCRIPTION Passivated thyristors in a plastic envelope, intended for use in applications requiring high bidirectional blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching. SYMBOL ORDERING INFORMATION Order Number Lead Free Halogen Free BT150L-TA3-T BT150G-TA3-T Note: Pin Assignment: K: Cathode A: Anode G: Gate Package TO-220 Pin Assignment 1 2 3 K A G Packing Tube MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 5 QW-R301-008.D BT150 SCR ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT 500(Note 2) BT150-500 VDRM V Repetitive Peak Off-State Voltages BT150-650 650(Note 2) VRRM BT150-800 800 Average On-State Current (half sine wave; TA ≤113°C) IT(AV) 2.5 A RMS on-State Current (all conduction angles) IT(RMS) 4 A t=10ms 35 Non-Repetitive Peak On-State Current ITSM A (half sine wave; TJ = 25 °C prior to surge) t=8.3ms 38 2 2 I t for Fusing (t = 10 ms) It 6.1 A2 s Repetitive Rate of Rise of On-State Current After dIT /dt 50 A/μs Triggering (ITM = 10 A; IG = 50 mA; dIG /dt = 50 mA/ms) Peak Gate Current IGM 2 A Peak Gate Voltage VGM 5 V Peak Reverse Gate Voltage VRGM 5 V Peak Gate Power (over any 20 ms period) PGM 5 W Average Gate Power PG(AV) 0.5 W Operating Junction Temperature TJ 125 (Note 3) °C Storage Temperature TSTG -40 ~150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Although not recommended, off-state voltages up to 800V may be applied without damage, but the thyristor may switch to the on-state. The rate of rise of current should not exceed 15A/μs. 3. Operation above 110°C may require the use of a gate to cathode resistor of 1kΩ or less. THERMAL RESISTANCES PARAMETER SYMBOL θJA θJC Junction to Ambient Junction to Case MIN TYP 60 MAX UNIT K/W K/W 4 ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise specified) PARAMETER Gate Trigger Current Latching Current Holding Current On-State Voltage SYMBOL IGT IL IH VT Gate Trigger Voltage VGT Off-State Leakage Current Critical Rate of Rise of Off-State Voltage Gate Controlled Turn-on Time Circuit Commutated Turn-off tIme I D , IR dVD /dt tgt tq CONDITIONS VD=12V, IT=0.1A VD=12V, IGT=0.1A VD=12V, IGT=0.1A IT=5A VD=12V, IT =0.1A VD=VDRM(max) , IT=0.1A, TJ=110°C VD=VDRM(max) , VR=VRRM(max) ,TJ=125°C VDM=67%VDRM(max), TJ=125°C,exponential waveform; RGK=100Ω ITM=10A, VD=VDRM(max), IG=5mA, dIG/dt=0.2 A/μs VD=67% VDRM(max), TJ=125°C, ITM=8A, VR=25V, dITM/dt=10A/μs, dVD/dt=2 V/μs, RGK=1KΩ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 0.1 TYP 15 0.17 0.10 1.23 0.4 0.2 0.1 MAX 200 10 6 1.8 UNIT μA mA mA V 1.5 V 0.5 mA 50 V/μs 2 μs 100 μs 2 of 5 QW-R301-008.D BT150 SCR TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R301-008.D BT150 SCR TYPICAL CHARACTERISTICS(Cont.) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R301-008.D BT150 SCR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R301-008.D