FX-400 Low Jitter Frequency Translator Previous Part Number FX-424 FX-400 Description The FX-400 is a precision quartz-based frequency translator used to translate an input frequency such as 8 kHz, 1.544 MHz, 2.048 MHz, 19.44 MHz etc. to any specific frequency from 1.544 MHz to 1.0 GHz. The FX-400 can perform either up or down frequency conversion. The FX-400’s superior jitter performance is achieved through the use of a precision VCXO or VCSO. With the use of an external multiplexer, up to 4 different input clocks can be translated to a common output frequency. Features • • • • • • • • • Applications Quartz-based PLL for Ultra-Low Jitter Frequency Translation up to 1 GHz Accepts up to 4 ext.-muxed clock inputs LVCMOS / LVDS / LVPECL Inputs compatible Differential LVPECL /LVDS or LVCMOS Output Lock Detect / Loss of Signal Alarms Output Disable 20.3 x 13.7 x 5.1 mm SMT package RoHS/Lead Free Compliant • • • • • • Wireless Infrastructure 10 Gigabit FC 10GbE LAN / WAN OADM and IP Routers Test Equipment Military Communications Block Diagram VCC (14) FIN1 FIN2 FIN (13 (13) ÷ FIN3 LD (10) VMON (5) Phase Detector & LD Loop Filter VCSO (8) FOUT1 (9) CFOUT1 FIN4 ÷ μ Controller SEL0 (1) SEL1 (2) GND (3, 7, 11, 12) OD (6) Figure 1. Functional block diagram Page 1 of 10 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Performance Specifications Table 1. Electrical Performance Parameter Symbol Min Frequency Input Frequency Capture Range Output Frequency FIN APR FOUT 0.008 ±40 1.544 Supply Voltage 2, 3 Current (No Load)3 VCC ICC 3.13 Input Signal 2, 3 LVCMOS LVDS LVPECL FIN FIN FIN Typical Maximum Units 800 1000 MHz ppm MHz 3.46 100 V mA VCC-1.0 950 VCC-2.5 450 V mV p-p V mV p-p ns ns % 1, 2, 3 CMOS LVDS LVPECL LVCMOS Output (Option A) 2, 3 LVCMOS Differential Output (Options C and D) 2, 3, 4, 5 Mid Level - LVPECL Swing - LVPECL Mid Level - LVDS Swing - LVDS Rise Time Fall Time Symmetry SSB Phase Noise, Fout = 155.52/622.08 10Hz Offset 100Hz Offset 1kHz Offset 10kHz Offset 100kHz Offfset 1 MHz Offset 10 MHz Offset VCC-1.4 450 VCC-2.4 250 tR tF SYM 45 VCC-1.25 600 VCC-2.3 410 0.5 0.5 50 55 5, 6 Φn Φn Φn Φn Φn Φn Φn -64/-27 -95/-55 -123/-123 -143/-110 -146/-130 -146/-146 -146/-146 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Jitter Generation 5, 6 155.52 MHz (12kHz - 20MHz BW) 622.08 MHz (12kHz - 20 MHz BW) ΦJ ΦJ 0.30 0.12 ps RMS ps RMS Operating Temperature (Options T of E) 1 ,3 TOP 0 to 70 or -40 to 85 0C 1. 2. 3. 4. 5. 6. Page 2 of 10 3.3 60 See Standard Frequencies and Ordering Information. Parameters are tested with production test circuit below (Fig 2). Parameters are tested at ambient temperature with test limits guard-banded for specified operating temperature. Measured from 20% to 80% of a full output swing (Fig 3). Not tested in production, guaranteed by design, verified at qualification. The FX-400 phase noise and jitter performance can be optimized for specific applications. Please consult with Vectron’s Application Engineers for more information. Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not implied at these or any other conditions in excess of conditions represented in the operational sections of this data sheet. Exposure to absolute maximum ratings for extended periods may adversely affect device reliability. Table 2. Absolute Maximum Ratings Symbol Ratings Unit Power Supply Parameter VDD 6 V Storage Temperature TSTR -55 to 125 0C Soldering Temp/TIme TLS 260/40 0C/sec Reliability The FX-400 is capable of meeting the following qualification tests Table 3. Environmental Compliance Parameter Conditions Mechanical Shock MIL-STD-883, Method 2002 Mechanical Vibration MIL-STD-883, Method 2007 Solderability MIL-STD-883, Method 2003 Gross and Fine Leak MIL-STD-883, Method 1014 Resistance to Solvents MIL-STD-883, Method 2016 Handling Precautions Although ESD protection circuitrry has been designed into the the FX-400, proper precautions should be taken when handling and mounting. VI employs a human body model and a charged-device model (CDM) for ESD susceptibility testing and design protection evaluation. ESD thresholds are dependent on the circuit parameters used to define the model. Although no industry wide standard has been adopted for the CDM, a standard HBM of resistance=1.5Kohms and capacitance = 100pF is widely used and therefore can be used for comparison purposes Table 4. Predicted ESD Ratings Model Minimum Conditions Human Body Model 500 V MIL-STD 883, Method 3015 Charged Device Model 500 V JEDEC, JESD22-C101 Page 3 of 10 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Reflow Profile Table 5. Reflow Profile (IPC/JEDEC J-STD-020C) Parameter Symbol Value tS 60 sec Min, 180 sec Max RUP 3 0C/sec Max PreHeat Time Ramp Up Time Above 217 0C Time To Peak Temperature tL 60 sec Min, 150 sec Max tAMB-P 480 sec Max tP 20 sec Min, 40 sec Max RDN 6 0C/sec Max Time At 260 0C Ramp Down The FX-400 is qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time intervals listed are based on the Pb-Free small body requirements. The temperatures refer to the topside of the package, measured on the package body surface. The FX-400 should not be subjected to a wash process that will immerse it in solvents. NO CLEAN is the recommended procedure. The FX-400 has been designed for pick and place reflow soldering. The FX-400 may be reflowed once and should not be reflowed in the inverted position. Terminal Plating: ENIG per IPC-4552 Electroless Ni = 3 - 6 μm Immersion Au = 0.05 μm Min Figure 4. Suggested IR Profile Tape and Reel Table 6. Tape and Reel Information Tape Dimensions (mm) Reel Dimensions (mm) W F Do Po P1 A B C D N W1 W2 #/Reel 44 20.2 1.5 4 20 330 1.5 13 20.2 100 44.4 50.4 200 Figure 5. Tape and Reel Page 4 of 10 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Pin Configuration Figure 6. Pin Configuration Table 7. Pin Functions Pin # Symbol I/O 1 SEL0 I LVCMOS Level Frequency Select * (See Table 8) 2 SEL1 I LVCMOS Frequency Select * (See Table 8) 3 GND GND Supply Case and Electrical Ground 4 Function Not present 5 VMON O 6 OD I 7 GND GND 8 FOUT 9 VCXO Control Voltage Monitor Under locked conditions VMON should be > 0.3V and <3.0V. The input frequency may be out of range if the voltage exceeds these levels LVCMOS Output Disable Disabled = Logic “1” Enabled = Logic “0” or no connect Supply Case and Electrical Ground O LCPECL. LVDS or LVCMOS Frequency Output CFOUT O LVPECL, LVDS or LVCMOS Complementary Frequency Output – Note for LVCMOS option this pad will be tied to GND. 10 LD O LVCMOS Lock Detect Locked = Logic “1” Loss of Signal = Logic “0” 11 GND GND Supply Case and Electrical Ground 12 GND GND Supply Case and Electrical Ground 13 FIN I LVCMOS or LVPECL Input Frequency – AC Coupled 14 VCC VCC Supply Power Supply Voltage (3.3 V ±5%) * For applications requiring two to four input frequencies, Vectron will assign a unique part number and the Input Frequency versus SEL[1:0] settings will be provided in a Specification Control Drawing. For single input configurations it is recommended that SEL0 and SEL1 are tied to ground. Table 8. Control Logic (LVCMOS) Page 5 of 10 SEL0 SEL1 Reference Clock Input 0 0 F1 0 1 F2 1 0 F3 1 1 F4 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator FX-400 Outline Diagram and Pad Layout Dimensions in inches Dimensions in mm [inches] Figure 7. Outline and Pad Layout Page 6 of 10 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Suggested Output Load Configurations Figure 8. Single Input Frequency Translation - LVPECL Termination Figure 9. Four Input Frequencies Translated to Common Output Frequency – LVPECL Termination Page 7 of 10 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Table 8. Standard Frequencies (MHz) 0.08000000 A9 6.31200000 C7 20.0000000 E2 39.8437500 HJ 65.5360000 J6 153.600000 MA 40.0000000 JF 66.0000000 JA 155.520000 M2 40.2830630 KK 70.0000000 KB 156.250000 M3 40.9600000 J1 70.6560000 KC 159.375000 M7 41.0888870 KM 71.6100000 KF 160.000000 M1 334.663300 RB 673.456600 0.10000000 AH 0.12800000 AX 6.48000000 C2 20.1416000 E3 6.75000000 CB 20.4800000 E4 0.24300000 0.25600000 A8 7.68000000 C9 20.5444340 EF AM 7.77600000 C5 20.7135000 E1 0.32000000 AW 8.19200000 0.38400000 AY 9.21600000 C3 20.8285720 EG 41.6571440 KP 73.7280000 K8 161.132813 M4 CH 20.8286000 EB 41.6600000 LM 74.1250000 K1 164.355475 M9 0.40000000 AF 9.72000000 C8 20.9165460 EH 41.8329130 KT 74.1758000 KA 166.628572 M5 400.000000 0.48000000 AK 9.75000000 CE 21.0050840 EJ 42.0000000 JB 74.2500000 K7 167.331646 N2 409.600000 0.50000000 BP 9.83040000 C1 22.0000000 E9 42.0101690 KV 75.0000000 KH 168.040678 N3 491.520000 RA 336.081350 RC 684.255400 R9 351.900000 W1 687.700000 TV 353.676350 RD 690.569196 R4 368.640000 RY 693.468750 RV 375.000000 RF 693.482991 R6 382.800000 RU 693.750000 R8 RR 696.390625 RW RE 696.421478 V1 PM 696.421875 TY 0.51200000 AJ 10.0000000 C4 22.1047720 EK 42.5000000 JC 76.8000000 K4 170.000000 N4 500.000000 RK 704.380600 TG 0.65545000 AE 10.2300000 DP 22.2171000 E5 42.6600000 JZ 77.7600000 K2 172.500000 NU 505.000000 V3 707.352700 TC 0.77200000 AT 10.2400000 DM 22.5792000 E8 44.2095440 KX 78.0000000 LH 173.370748 ND 531.000000 PH 707.500000 V2 0.96000000 A7 10.4142850 DV 24.0000000 EC 44.4343000 LF 78.1250000 K3 173.437500 NP 531.250000 P8 710.948600 T2 1.00000000 BB 10.4582260 DU 24.5760000 E6 44.6218000 JW 78.2000000 LP 176.838175 NA 568.928600 PJ 712.520000 TW 1.02400000 B2 10.4872000 DN 24.7040000 E7 44.7360000 J3 78.6432000 K5 182.016000 N8 569.196400 P9 716.573200 T1 1.21500000 BU 10.9490000 DG 25.0000000 F7 44.9280000 JE 79.6875000 KG 182.857142 NM 588.000000 RH 718.750000 T5 T3 1.22880000 BK 10.9500000 DJ 25.1658000 F8 45.1584000 JG 80.0000000 K9 184.000000 NG 595.056000 PL 719.734400 1.25000000 BG 11.1840000 DF 25.6000000 F6 45.8240000 JM 80.5664130 KJ 184.320000 NH 600.000000 PR 737.280000 TL 1.33330000 BF 12.2880000 D8 25.9200000 F2 46.0379460 LG 82.1777380 KL 187.500000 N5 614.400000 RG 739.200000 TT 1.50000000 BE 12.3076860 DY 26.0000000 F3 46.7200000 JK 82.9440000 K6 195.000000 N7 622.080000 P2 742.500000 V4 1.53600000 BV 12.3520000 D1 27.0000000 F4 46.8750000 JY 83.3142880 KN 200.000000 NE 624.693800 PD 748.070900 T6 1.54400000 B3 12.8000000 D2 27.6480000 FB 48.0000000 JV 83.6658250 KR 200.192000 N6 624.704800 P6 750.000000 T7 1.92000000 B1 13.0000000 D3 28.7040000 F1 49.1520000 J7 84.0203380 KU 201.416020 N1 625.000000 P3 768.000000 TN 2.00000000 B8 13.5000000 DT 29.4912000 F5 49.4080000 J2 86.6853740 LJ 212.500000 NF 627.329600 P7 777.600000 T4 2.04800000 B4 14.8351600 DL 29.5000000 F9 50.0000000 JD 88.4190880 KW 219.429571 NL 629.987800 PA 779.568600 T8 2.30400000 BD 15.0000000 D4 30.0000000 HE 50.0480000 KD 95.7000000 LK 240.000000 NR 637.500000 PG 780.881000 TD 2.45760000 BJ 15.0336000 DR 30.7200000 H1 51.2000000 LL 97.5000000 KE 243.000000 NC 640.000000 PN 781.250000 T9 2.50000000 BM 15.3600000 DW 30.8800000 HF 51.8400000 J4 100.000000 L8 245.760000 N9 644.531250 P4 796.875000 TB 2.55750000 B9 16.0000000 D9 31.2500000 H8 52.0000000 JP 105.000000 L6 250.000000 NT 645.120000 RJ 800.000000 TK 3.08800000 B6 16.3840000 D5 32.0000000 H2 53.3300000 JU 106.250000 L9 252.571428 NJ 647.239400 PE 805.664100 TA 3.24000000 BL 17.1840000 DE 32.7680000 H3 54.7460000 JL 108.000000 LA 256.000000 NK 647.250800 PK 809.063500 TE 3.25000000 BC 18.4320000 D7 33.0000000 H7 55.0000000 JX 110.000000 L1 262.144000 NB 649.970300 PF 819.200000 TH 3.37500000 BH 18.5280000 DC 33.3330000 HC 60.0000000 JR 112.000000 L2 292.571429 NN 657.421875 PB 821.777300 TF 3.84000000 B7 18.7500000 EE 34.3680000 H6 61.3800000 KY 114.000000 L3 300.000000 PT 665.625600 PC 850.000000 TJ 4.00000000 BN 19.2000000 DD 34.5600000 HB 61.4400000 J5 120.000000 LC 307.200000 RX 666.514286 P5 983.400000 TU 4.09600000 B5 19.3926580 DX 36.8640000 HG 62.2080000 J8 122.880000 LB 311.040000 P1 669.128100 R2 1,000.0000 TM 4.19430400 CJ 19.4400000 D6 37.0560000 H4 62.5000000 J9 124.416000 L7 312.500000 PU 669.326582 R3 5.00000000 C6 19.5312500 DZ 37.1250000 H9 62.9145000 LE 125.000000 L4 318.750000 PV 669.642900 R1 5.12000000 CD 19.6608000 DB 37.5000000 HK 63.3600000 JJ 130.000000 LD 320.000000 PP 670.838600 R7 6.14400000 CG 19.6989680 DK 38.8800000 H5 63.8976000 JN 139.264000 L5 322.265650 PW 672.000000 RT 6.29140000 CC 19.7190000 DH 39.0625000 HH 64.0000000 JT 150.000000 M8 328.710950 PX 672.156250 TX 6.29145600 CF 19.9218750 ED 39.3216000 HD 64.1520000 JH 150.144000 M6 333.257150 PY 672.162712 R5 Page 8 of 10 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Ordering Information F X - 4 0 0 - E A E - K N N N - XX - XX Product Family FX: Frequency Translator Output Frequency (See Above) Package 400: 20.3 13.0 5.1mm Input Frequency (See Above) Factory Use Input E: 3.3 Vdc ±10% Factory Use Output A: LVCMOS C: LVPECL D: LVDS Factory Use Operating Temperature E: -40 to 85 °C T: 0 to 70 °C Absolute Pull Range K: ± 50 ppm S: ± 100 ppm 1. For non-listed frequencies and/or multiple input frequencies a unique part number will be assigned with the following format FX-400-XXX-SNNNN. “SNNNN” is the SCD number. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.8010 Fax: +49 (0) 7268.801281 Vectron International 1589 Century Avenue, the 19th Floor Chamtime International Financial Center Shanghai, China Tel: 86.21.60812888 Fax: 86.21.61633598 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Page 9 of 10 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011 FX-400 Low Jitter Frequency Translator Revision History Date Page 10 of 10 Approved Description 15Jun2011 CH Updated frequency code table 10Jun2011 BW Updated frequency code table 18Feb2011 BW Terminal Plating thickness added to page 4 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 10Jun2011