OX-4000-EAE-2580-20M00 OCXO Preliminary version: Subject to technical modification. Nominal frequency (f0) 20 MHz Frequency stabilities Parameter Frequency stability Operating temp. range -25 to 25 ppb -40 ... 85 °C Value Condition -200 to 200 ppb -10 to 10 ppb -10 to 10 ppb <± 1 ppb <± 25 ppb <± 100 ppb <± 1 ppm @25 °C static; 3.3 V ±5 % static; Load ± 5 % after 30 days ; @ 25 °C after 30 days ; @ 25 °C after 30 days ; @ 25 °C after 30 days ; @ 25 °C Value Condition vs. operating temp. range (df/f@25 °C) Parameter initial tolerance (df/f0) vs. supply voltage change (df/f) vs. load change (df/f) vs. aging / daily (df/f) vs. aging / month (df/f) vs. aging / year (df/f) vs. aging / 10 years (df/f) Drift 24h over -40..85°C: <50 ppb peak-peak RF output Parameter Signal Load Rise Time Fall Time Duty cycle V Low V High Harmonics LVCMOS 15 pF ±10 % < 10 ns < 10 ns 45 / 55 % x < 0.4 V x > 2.4 V <- 30 dBc @ 10 to 90 %Vout @ 90 to 10 %Vout @ 1.65 V Supply voltage Parameter Supply voltage (Vs) Current consumption steady state Current consumption during warm up Value Condition 3.3 V ± 5 % < 330 mA < 757 mA @ Vsnom & 25 °C @ Vs Additional Parameters Parameter Typ. Max. Condition Phase Noise -85 -110 -130 -143 -150 -60 -90 -115 -130 -145 dBc/Hz@1Hz dBc/Hz@10Hz dBc/Hz@100Hz dBc/Hz@1kHz dBc/Hz@10kHz Parameter Warm-up time Processing & Packing Value Condition < 3 min handling&processing note @ 25 °C to final frequency Additional environmental conditions Rapid temperature changes MIL-883-1010 Cond B 1000 cycles -55/125°C Vibration MIL-STD-883 Meth 2007 Cond A 20G 20-2000Hz 4x in each 3axis 4 min Fine/Gross Leakage MIL-883-1014 A1/C4 Shock MIL-STD-202 Meth 213 Cond.C 100G 6ms 6 shocks in each direction Solderability J_STD_002B Cond A leaded/ Cond. B SMD 245°C (diving Ti me 5 ±0,5sec.) DipLook with 8h damp pre-treatment: solder wetting >95% Solvent resistance MIL-STD-883 Meth 2015 Solv. 1,3,4 ESD HBM JESD22-A114-A Class 2 10* 2000V Moisture Sensit. Level 1 JESD22-A113-B RoHS compliance 100% ROHS compliant Vectron International • Product Specifications OX-4000-EAE-2580 www.vectron.com 20-May-26 by Göhrig, Detlef Index : P2 printed 2011-05-26 • page 1 of 3 OX-4000-EAE-2580-20M00 OCXO Preliminary version: Subject to technical modification. Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range Min -40 -40 Typ Max Units 6 85 85 V °C °C Condition Enclosure Type G125C Height 8.5 mm all units in mm Pin Connections Pin 1: N.C. Pin 7: GND(Case) Pin 8: RF-Output Pin 14: Vs (supply voltage) Marking OX-4000-EAE-2580 20,000 MHz * VI AYYWW * pin-1 marking Vectron International • Product Specifications OX-4000-EAE-2580 www.vectron.com 20-May-26 by Göhrig, Detlef Index : P2 printed 2011-05-26 • page 2 of 3 OX-4000-EAE-2580-20M00 OCXO Preliminary version: Subject to technical modification. Standard shipping method 10 * 8 array / 80 units per tray Notes: Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) . Preliminary version: Subject to technical modification. Vectron International • Product Specifications OX-4000-EAE-2580 www.vectron.com 20-May-26 by Göhrig, Detlef Index : P2 printed 2011-05-26 • page 3 of 3