OX-4011-EAE-2580-20M00 OCXO Preliminary version: Subject to technical modification. Nominal frequency (f0) 20 MHz Frequency stabilities Parameter Frequency stability Operating temp. range -25 to 25 ppb -40 ... 85 °C Value Condition -200 to 200 ppb -10 to 10 ppb -10 to 10 ppb <± 1 ppb <± 25 ppb <± 100 ppb <± 1 ppm @25 °C static; 3.3 V ±5 % static; Load ± 5 % after 30 days ; @ 25 °C after 30 days ; @ 25 °C after 30 days ; @ 25 °C after 30 days ; @ 25 °C Value Condition vs. operating temp. range (df/f@25 °C) Parameter initial tolerance (df/f0) vs. supply voltage change (df/f) vs. load change (df/f) vs. aging / daily (df/f) vs. aging / month (df/f) vs. aging / year (df/f) vs. aging / 10 years (df/f) Drift 24h over -40..85°C: <50 ppb peak-peak RF output Parameter Signal Load Rise Time Fall Time Duty cycle V Low V High Harmonics LVCMOS 15 pF ±10 % < 10 ns < 10 ns 45 / 55 % x < 0.4 V x > 2.4 V <- 30 dBc @ 10 to 90 %Vout @ 90 to 10 %Vout @ 1.65 V Supply voltage Parameter Supply voltage (Vs) Current consumption steady state Current consumption during warm up Value Condition 3.3 V ± 5 % < 330 mA < 757 mA @ Vsnom & 25 °C @ Vs Additional Parameters Parameter Typ. Max. Condition Phase Noise -85 -110 -130 -143 -150 -60 -90 -115 -130 -145 dBc/Hz@1Hz dBc/Hz@10Hz dBc/Hz@100Hz dBc/Hz@1kHz dBc/Hz@10kHz Parameter Warm-up time Processing & Packing Value Condition < 3 min handling&processing note @ 25 °C to final frequency Additional environmental conditions Rapid temperature changes MIL-883-1010 Cond B 1000 cycles -55/125°C Vibration MIL-STD-883 Meth 2007 Cond A 20G 20-2000Hz 4x in each 3axis 4 min Fine/Gross Leakage MIL-883-1014 A1/C4 Shock MIL-STD-202 Meth 213 Cond.C 100G 6ms 6 shocks in each direction Solderability J_STD_002B Cond A leaded/ Cond. B SMD 245°C (diving Ti me 5 ±0,5sec.) DipLook with 8h damp pre-treatment: solder wetting >95% Solvent resistance MIL-STD-883 Meth 2015 Solv. 1,3,4 ESD HBM JESD22-A114-A Class 2 10* 2000V Moisture Sensit. Level 1 JESD22-A113-B RoHS compliance 100% ROHS compliant Vectron International • Product Specifications OX-4011-EAE-2580 www.vectron.com 20-May-26 by Göhrig, Detlef Index : P2 printed 2011-05-26 • page 1 of 4 OX-4011-EAE-2580-20M00 OCXO Preliminary version: Subject to technical modification. Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range Min -40 -40 Typ Max Units 6 85 85 V °C °C Condition Enclosure Type G269 Height 10.8 mm all units in mm Pin Connections Pin 1: N.C. Pin 7: GND(Case) Pin 8: RF-Output Pin 14: Vs (supply voltage) Marking OX-4011-EAE-2580 20,000 MHz * VI AYYWW * pin-1 marking Vectron International • Product Specifications OX-4011-EAE-2580 www.vectron.com 20-May-26 by Göhrig, Detlef Index : P2 printed 2011-05-26 • page 2 of 4 OX-4011-EAE-2580-20M00 OCXO Preliminary version: Subject to technical modification. Reflow profile Profile Feature Pb-Free Assembly/Sn-Pb Assembly Average ramp-up rate (TL to Tp) 3°C/second max. Preheat -Temperature Min (Tsmin) 150°c -Temperature Min (Tsmax) 200°c -Time (min to max) (ts) 60-180 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (TL) 217°C - Time (tL) 60-150 seconds Peak Temperature (Tp) max 260°C Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Ramp-down Rate 6°C/second max. Time 25°C to Peak Temperature 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Additional Information This SMD oscillator has been designed for pick and place reflow soldering. SMD oscillators must be on the top side of the PCB during the reflow process. Vectron International • Product Specifications OX-4011-EAE-2580 www.vectron.com 20-May-26 by Göhrig, Detlef Index : P2 printed 2011-05-26 • page 3 of 4 OX-4011-EAE-2580-20M00 OCXO Preliminary version: Subject to technical modification. Standard shipping method Tape width W [mm] Quantity per meter Quantity per reel P [mm] A [mm] B [mm] K [mm] 32 50 250 20 13.35 20.95 11.4 Notes: Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) . Preliminary version: Subject to technical modification. Vectron International • Product Specifications OX-4011-EAE-2580 www.vectron.com 20-May-26 by Göhrig, Detlef Index : P2 printed 2011-05-26 • page 4 of 4