VECTRON VC

Data Sheet
VC-710
Voltage Controlled Crystal Oscillator
Features
• Small Industry Standard Package, 5.0 x 7.5 x 1.8 mm
• Output Frequencies from 80 MHz to 200 MHz
• 3.3 V Operation
• HFF crystal for ultra low jitter
• Complementary LVPECL Outputs
• 0/70° C or –40/85° C operating temperature
• Enable /Disable
• Product is compliant to RoHS directive
and fully compatible with lead free assembly
Applications
PLL circuits for Clock Smoothing and Frequency Translation
• Fiber Channel
• SONET
• SDH, ITU-T G.709
• SONET, GR-253-CORE Issue3
Description
The VC-710 is a voltage controlled crystal oscillator that
operates at the fundamental frequency of the internal HFF
crystal. The HFF crystal is a high-Q quartz device that
enables the circuit to achieve low phase jitter performance
over a wide operating temperature range. The oscillator is
housed in an industry standard hermetically sealed leadless
surface mount package and is available on tape and reel.
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1
Page 1 of 6
Website: www.vectron.com
Rev: December 13, 2006
VC-710 Voltage Controlled Crystal Oscillator
Electrical Performance
Parameter
Frequency
Supply Voltage
(+3.3 V)
Supply Current
Output Logic Levels
Output Logic High
Output Logic Low
Symbol
fO
VDD
Min
80
3.135
Typical
155.52
3.3
Maximum
200
3.465
Units
MHz
V
50
90
mA
Vcc -0.950
Vcc -1.700
Vcc -0.880
Vcc -1.620
V
V
0.5
0.5
1
1
ns
ns
50
0/70 or –40/85
0.3
0.5
55
%
°C
ps (rms)
ps (rms)
IDD
+25 ºC
+25 ºC
VOH
VOL
Transition Times
Rise Time
Fall Time
Vcc -1.025
Vcc -1.810
tR
tF
Symmetry or Duty Cycle
Operating temperature (ordering option)
SYM
45
Jitter (12 kHz – 20 MHz BW), 155.52 MHz
Jitter (50 kHz – 80 MHz BW), 155.52 MHz
Phase Noise, f0 = 155.52 MHz
10 Hz offset
100 Hz offset
1 kHz offset
10 kHz offset
100 kHz offset
1 MHz offset
10 MHz offset
-64
-95
-123
-143
-146
-146
-146
Test Conditions for APR (+3.3V)
Absolute Pull Range (APR)
Gain Transfer
Control Voltage Bandwidth (-3dB)
Enable/Disable1
Output Enabled, F option
Output Disabled, F option
Output Enabled, B option
Output Disabled, B option
Package Size
VC
APR
0.3
+ 50
BW
20
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
3.0
V
ppm
ppm/V
kHz
Positive, 65
100
VDD*0.7
V
V
V
V
mm
VDD*0.3
VDD*0.2
VDD*0.7
5.08 x 7.5 x 1.8
1. Output is enabled if the E/D, pin 2, is left open on F option. E/D must be terminated on B option.
(-1.3V to +2V)
1
6
2
5
(+2V)
>1.4V or Open
COutput
tR
(-1.3V)
3
tF
SYM = 100 x tA / tB
Output
4
VOH
80%
50Ω
50Ω
50%
Test Circuit Notes:
1) To Permit 50Ω Measurement of Outputs, all DC Inputs are Biased Down 1.3V.
2) All Voltage Sources Contain Bypass Capacitors to Minimize Supply Noise.
3) 50Ω Terminations are W ithin Test Equipment.
20%
VOL
tA
tB
Figure 1. Test Circuit ( 3.3 V)
Figure 2. PECL Waveform
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1
Page 2 of 6
Website: www.vectron.com
Rev: December 13, 2006
VC-710 Voltage Controlled Crystal Oscillator
Outline Diagram
6
5
Pad Layout
4
VDUGLA
35.328
VI YWW
1
2
3
Pin Out
Pin
Symbol
Function
1
VC
VCXO Control Voltage
2
OE
Enable / Disable
3
4
5
6
GND
Output
COutput
VCC
Case and Electrical Ground
Output
Complementary Output
Power Supply Voltage (3.3 V)
Tape and Reel (EIA-481-2-A)
Po
ØDo
W2
F
W
C
D
N
A
W1
P1
B
Tape Dimensions (mm)
Reel Dimensions (mm)
Dimension
W
F
Do
Po
P1
A
B
C
D
N
W1
W2
Tolerance
Typ
Typ
Typ
Typ
Typ
Typ
Min
Typ
Min
Min
Typ
Max
# Per
Reel
VC-710
16
7.5
1.5
4
8
178
1.5
13
20.2
50
16.4
22.4
200
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1
Page 3 of 6
Website: www.vectron.com
Rev: December 13, 2006
VC-710 Voltage Controlled Crystal Oscillator
Absolute Maximum Ratings
Parameter
Power Supply
Voltage Control Range
Storage Temperature
Symbol
VDD
VC
TS
Ratings
0 to 6
0 to VDD
-55 to 125
Unit
V
V
°C
Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not implied at these or
any other conditions in excess of conditions represented in the operational sections of this data sheet. Exposure to absolute maximum
ratings for extended periods may adversely affect device reliability.
Reliability
The VC-710 family is capable of meeting the following qualification tests:
Environmental Compliance
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Gross and Fine Leak
Resistance to Solvents
Moisture Sensitivity
Conditions
MIL-STD-883, Method 2002
MIL-STD-883, Method 2007
MIL-STD-883, Method 2003
MIL-STD-883, Method 1014
MIL-STD-883, Method 2015
MSL1
Handling Precautions
Although ESD protection circuitry has been designed into the VC-710 proper precautions should be taken when handling and mounting. VI
employs a human body model and a charged-device model (CDM) for ESD susceptibility testing and design protection evaluation.
ESD Ratings
Model
Human Body Model
Charged Device Model
Minimum
500
500
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Conditions
MIL-STD 883, Method 3015
JESD 22-C101
Tel: 1-88-VECTRON-1
Page 4 of 6
Website: www.vectron.com
Rev: December 13, 2006
VC-710 Voltage Controlled Crystal Oscillator
Suggested IR profile
The VC-710 is qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time
intervals listed are based on the Pb-Free small body requirements and parameters are listed in the table below.
The contact pads are gold over nickel so lower IR reflow temperatures such as 220°C can be used (device is
backwards compatible with a lead solder assembly).
The VC-710 is hermetically sealed so an aqueous wash is not an issue.
Reflow Profile (IPC/JEDEC J-STD-020C)
Parameter
PreHeat Time
Ramp Up
Time Above 217 oC
Time To Peak Temperature
Time At 260 oC
Ramp Down
Symbol
tS
R UP
tL
t AMB-P
tP
R DN
Value
60 sec Min, 180 sec Max
3 oC/sec Max
60 sec Min, 150 sec Max
480 sec Max
20 sec Min, 40 sec Max
6 oC/sec Max
tL
260
Temperature (DegC)
R UP
tP
217
200
R DN
150
tS
t AMB-P
25
Time (sec)
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1
Page 5 of 6
Website: www.vectron.com
Rev: December 13, 2006
VC-710 Voltage Controlled Crystal Oscillator
Standard Frequencies (MHz)
80.000
88.4736
89.600
110.000
112.640
120.000
139.264
144.000
155.520
167.3316
175.000
184.000
Other frequencies available upon request
91.080
122.880
156.250
184.320
93.312
124.416
157.500
187.500
96.000
125.000
161.1328
192.000
100.000
128.000
166.627
192.456
101.992
133.330
166.6286
200.000
Ordering Information
VC - 710 - D F F - G F A - xxx.xxx
Product Family
Frequency
VC: VCXO
80 - 200 MHz
Linearity, Temp. Stability
Package
A: N/A
L: + 10 % linearity
M: + 20 ppm temp. stability
710: 5.0 x 7.5 x 1.8 mm
Input
Enable - Disable)
D: 3.3 Vdc ± 5%
F: Pin 2, Output is enabled high
B: Pin 2, Output is enabled low
Output
Absolute Pull Range
F: Complementary LVPECL
G: + 50 ppm
Operating Temperature
C: 0 to 70 °C
F: -40 to 85 °C
1. Not all combinations are possible.
2. ± 10% linearity available at certain frequencies.
Consult factory.
For Additional Information, Please Contact:
USA: Vectron International, 267 Lowell Rd, Hudson, NH 03051 . . . . . . . Tel: 1-88-VECTRON-1
Fax: 1-888-FAX-VECTRON
EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 7268 8010
Fax: 49 (0) 7268 801281
ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 86 21 5048 0777
Fax: 86 21 5048 1881
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1
Page 6 of 6
Website: www.vectron.com
Rev: December 13, 2006