HRS DF40C3.5-30DS

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
DF40 Series
Decrease in the board-occupied area
Smaller width
DF40
■Features
1. H
igher density of the board-mounted components
High contact reliability – Effective connection wipe of 0.45 mm
Extremely small board mounting pattern and low abovethe-board profile makes the connectors ideally suited for
small device applications.
1.5mm
Despite connectors small size and low profile the contacts
provide strong contact forces and long contact wipe (0.45
mm), guaranteeing reliable electrical and mechanical
performance.
Shock-absorbing rib
0.45mm
2. Stacking height variation : 1.5mm to 4.0mm
3. High contact reliability
5.0mm
3.38mm
Other HRS
connector
4. Large self-alignment distance
The connectors will self-align within 0.33 mm.
Interlock indentations
(for 10 to 50 positions)
5. Confirmation of the fully mated condition
Positive “click” sensation confirms correct insertion and
connection of all contacts.
6. Built-in shock absorbing feature
The protrusions and indents in the insulator bodies protect
the connectors from failures when exposed to sudden
impact.
7. Solder wicking prevention
Nickel-plated barriers provide protection against solder
wicking into the contact areas.
8. Contact area protection
External walls protect the exposed contact areas from
intrusion of flux or foreign particles.
Stacking Height variation
Stacking
Height
10
12
20
24
30
34
40
Pos.
44
50
60
70
80
90
100
1.5mm 2.0mm 2.5mm 3.0mm 3.5mm 4.0mm
K
∆
K
K
K
K
K
---K
K
K
K
K
K
---K
K
K
K
---K
∆
K
K
K
K
-------
------K
----
∆
---K
---K
K
-------------
------------K
------K
K
K
K
K
K
K
------------K
---------K
K
---K
-------
-------------------
∆
---K
K
---K
K
----
∆: Reserved for product expansion
2012.3e
1
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Product Specifications
Ratings
Current rating 0.3A
Operation temperature range -35ç to +85ç (Note 1)
Storage temperature range -10ç to +60ç (Note 2)
Voltage rating 30V AC, DC
Operation humidity range
Storage humidity range
Item
RH 20% to 80%
Specification
RH 40% to 70% (Note 2)
Conditions
1. Insulation resistance
50 Mø min.
100V DC
2. Withstanding voltage
No flashover or insulation breakdown.
100V AC / one minute
3. Contact resistance
90 mø max.
1mA, 20mV AC, 1 kHz
4. Vibration
No electrical discontinuity of 1 µs or more.
Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours, 3 axis
5. Humidity
Contact resistance: 90 mø max.
IInsulation resistance: 25 Mø min.
96 hours at +40±2ç and humidity of 90% to 95%.
6. Temperature cycle
Contact resistance: 90 m ø max.
Insulation resistance: 50 Mø min.
Temperature: -55➝+5ç to 35ç➝+85ç➝+5ç to +35ç
Time: 30➝10➝30➝10 (Minutes)
5 cycles
7. Durability
(insertion/withdrawal)
Contact resistance: 90 mø max.
30 cycles
8. Resistance to
soldering heat
No deformation of components
affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 350ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: T
he term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature range
and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
■Materials
Product
Part
Material
Finish
Remarks
Receptacles
Headers
Insulator
LCP
Color : Black
UL94V-0
Contacts
Phosphor bronze
Gold plated
-------------
■Ordering information
●Receptacle
# (**) - * DS - 0.4 V (**)
DF40
q
w
qSeries Name : DF40
e
r
t
y
eStacking Height
wConfiguration
Blank
2.0
2.5
3.0
3.5
4.0
C: Without metal fittings
HC: Without metal fittings
(Stacking height : 2.5mm to 4.0mm)
u
i
tConnector Type
DS : Double-row receptacle
Stacking Height
1.5mm
2.0mm
2.5mm
3.0mm
3.5mm
4.0mm
yContact Pitch : 0.4mm
uTerminal Type V: SMT vertical mount
iPackaging
(51) : Embossed tape packaging
rNumber of Contacts
●Header
DF40
q
# - * DP - 0.4 V (**)
w
e
r
t
y
u
qSeries Name : DF40
eNumber of Contacts
tContact Pitch : 0.4mm
wConfiguration
rConnector Type
yTerminal Type V: SMT vertical mount
C: Without metal fittings
DP : Double-row pin header
uPackaging
(51) : Embossed tape packaging
2
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Receptacles (Stacking Height : 1.5mm)
A±0.2
B±0.08
P=0.4±0.05
Note 2
3.38±0.2
2.88±0.2
HRS logo
Pick-and-place area : C±0.2
D±0.15
0.12±0.02
Cavity identification
■Recommended PCB mounting pattern
B±0.02
Ill.1
P=0.4±0.02
1.5MAX
0
2.38 -0.05
3.78 +0.05
0
YES
Conductive traces
Note 3
Ill.2
0.2±0.02
NO
Conductive traces
[Specification number]
(51): Embossed tape packaging (5,000 pieces per reel)
● Stacking Height : 1.5mm
Part Number
DF40C- 10DS-0.4V(51)
DF40C- 12DS-0.4V(51)
DF40C- 20DS-0.4V(51)
DF40C- 24DS-0.4V(51)
DF40C- 30DS-0.4V(51)
DF40C- 34DS-0.4V(51)
DF40C- 40DS-0.4V(51)
DF40C- 50DS-0.4V(51)
DF40C- 60DS-0.4V(51)
DF40C- 70DS-0.4V(51)
DF40C- 80DS-0.4V(51)
DF40C- 90DS-0.4V(51)
DF40C-100DS-0.4V(51)
CL No.
Number of contacts
684-4036-2-51
10
Reserved for product expansion
12
684-4005-9-51
20
684-4006-1-51
24
684-4007-4-51
30
684-4023-0-51
34
684-4008-7-51
40
684-4009-0-51
50
684-4004-6-51
60
684-4016-5-51
70
684-4002-0-51
80
684-4124-8-51
90
684-4033-4-51
100
A
4.6
5.0
6.6
7.4
8.6
9.4
10.6
12.6
14.6
16.6
18.6
20.6
22.6
B
1.6
2.0
3.6
4.4
5.6
6.4
7.6
9.6
11.6
13.6
15.6
17.6
19.6
C
1.0
1.0
1.0
1.2
1.5
2.3
3.2
3.2
3.2
3.2
3.2
3.2
3.2
Unit: mm
D
1.45
1.45
1.45
1.45
1.45
1.45
1.45
1.45
1.45
1.45
1.45
1.45
1.45
Note 1: Order by number of reels.
Note 2: Connectors with 60 or 100 contacts may have several recessed areas in this location. Pick-and-place operation will
NOT be affected.
.
Note 3: No conductive traces through the areas indicated by
Refer to Ill.1 and Ill.2. for specific restrictions and exception to the above requirement.
Note 4: This connector is NOT polarized.
3
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Receptacles (Stacking Height : 2.0mm)
2.94±0.2
P=0.4±0.05
3.38±0.2
A±0.2
B±0.08
0.12±0.02
D±0.15
Pick-and-place area : C±0.2
■Recommended PCB mounting pattern
Ill.1
B±0.02
P=0.4±0.05
Conductive traces
1.5MAX
0
2.38 -0.05
3.78
+0.05
0
YES
Ill.2
0.2±0.02
NO
Conductive traces
[Specification number]
(51): Embossed tape packaging (4,000 pieces per reel)
● Stacking Height : 2.0mm
Part Number
DF40C(2.0)- 12DS-0.4V(51)
DF40C(2.0)- 20DS-0.4V(51)
DF40C(2.0)- 24DS-0.4V(51)
DF40C(2.0)- 30DS-0.4V(51)
DF40C(2.0)- 40DS-0.4V(51)
DF40C(2.0)- 44DS-0.4V(51)
DF40C(2.0)- 50DS-0.4V(51)
DF40C(2.0)- 60DS-0.4V(51)
DF40C(2.0)- 70DS-0.4V(51)
DF40C(2.0)- 80DS-0.4V(51)
CL No.
Number of contacts
684-4148-6-51
12
684-4040-0-51
20
684-4021-2-51
24
684-4058-5-51
30
684-4042-5-51
40
Reserved for product expansion
44
684-4091-0-51
50
684-4034-7-51
60
684-4147-3-51
70
684-4132-6-51
80
A
5.0
6.6
7.4
8.6
10.6
11.4
12.6
14.6
16.6
18.6
B
2.0
3.6
4.4
5.6
7.6
8.4
9.6
11.6
13.6
15.6
C
1.0
1.0
1.2
1.5
3.2
3.2
3.2
3.2
3.2
3.2
Note 1: Order by number of reels.
Note 2: Connectors with 60 or 100 contacts may have several recessed areas in this location. Pick-and-place operation will
NOT be affected.
.
Note 3: No conductive traces through the areas indicated by
Refer to Ill.1 and Ill.2. for specific restrictions and exception to the above requirement.
Note 4: This connector is NOT polarized.
4
Unit: mm
D
1.95
1.95
1.95
1.95
1.95
1.95
1.95
1.95
1.95
1.95
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Receptacles (Stacking Height : 2.5mm to 4.0mm)
A±0.2
B±0.08
2.94±0.2
3.38±0.2
P=0.4±0.05
0.12±0.02
D±0.15
Pick-and-place area : C±0.2
■Recommended PCB mounting pattern
Ill.1
B±0.02
P=0.4±0.02
Conductive traces
0.92MAX
0
2.38 -0.05
3.78
+0.05
0
YES
Ill.2
NO
0.2±0.02
Conductive traces
[Specification number]
(51): Embossed tape packaging (3,000 pieces per reel)
● Stacking Height : 2.5mm
Part Number
DF40HC(2.5)- 20DS-0.4V(51)
DF40HC(2.5)- 30DS-0.4V(51)
DF40HC(2.5)- 40DS-0.4V(51)
DF40HC(2.5)- 50DS-0.4V(51)
DF40HC(2.5)- 60DS-0.4V(51)
CL No.
Number of contacts
684-4126-3-51
20
Reserved for product expansion
30
684-4112-9-51
40
684-4101-2-51
50
684-4085-8-51
60
A
6.6
8.6
10.6
12.6
14.6
B
3.6
5.6
7.6
9.6
11.6
C
1.0
1.5
3.2
3.2
3.2
Unit: mm
D
2.4
2.4
2.4
2.4
2.4
[Specification number]
(51): Embossed tape packaging (3,000 pieces per reel)
● Stacking Height : 3.0mm
Part Number
DF40HC(3.0)- 30DS-0.4V(51)
DF40HC(3.0)- 44DS-0.4V(51)
DF40HC(3.0)- 50DS-0.4V(51)
DF40HC(3.0)- 60DS-0.4V(51)
DF40HC(3.0)- 70DS-0.4V(51)
DF40HC(3.0)- 80DS-0.4V(51)
DF40HC(3.0)- 90DS-0.4V(51)
DF40HC(3.0)- 100DS-0.4V(51)
CL No.
684-4098-0-51
684-4076-7-51
684-4099-2-51
684-4100-0-51
684-4138-2-51
684-4180-9-51
684-4161-4-51
684-4151-0-51
Number of contacts
30
44
50
60
70
80
90
100
A
8.6
11.4
12.6
14.6
16.6
18.6
20.6
22.6
B
5.6
8.4
9.6
11.6
13.6
15.6
17.6
19.6
C
1.5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
Unit: mm
D
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
Note 1: Order by number of reels.
Note 2: Connectors with 60 or 100 contacts may have several recessed areas in this location. Pick-and-place operation will NOT be affected.
.
Note 3: No conductive traces through the areas indicated by
Refer to Ill.1 and Ill.2. for specific restrictions and exception to the above requirement.
Note 4: This connector is NOT polarized.
5
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
[Specification number]
(51): Embossed tape packaging (2,000 pieces per reel)
● Stacking Height : 3.5mm
Part Number
DF40HC(3.5)- 30DS-0.4V(51)
DF40HC(3.5)- 50DS-0.4V(51)
DF40HC(3.5)- 60DS-0.4V(51)
DF40HC(3.5)- 80DS-0.4V(51)
CL No.
684-4136-7-51
684-4109-4-51
684-4102-5-51
684-4162-7-51
Number of contacts
30
50
60
80
A
8.6
12.6
14.6
18.6
B
5.6
9.6
11.6
15.6
C
1.5
3.2
3.2
3.2
Unit: mm
D
3.4
3.4
3.4
3.4
[Specification number]
(51): Embossed tape packaging (2,000 pieces per reel)
● Stacking Height : 4.0mm
Part Number
DF40HC(4.0)- 40DS-0.4V(51)
DF40HC(4.0)- 50DS-0.4V(51)
DF40HC(4.0)- 60DS-0.4V(51)
DF40HC(4.0)- 80DS-0.4V(51)
DF40HC(4.0)- 90DS-0.4V(51)
CL No.
Number of contacts
Reserved for product expansion
40
684-4104-0-51
50
684-4133-9-51
60
684-4140-4-51
80
684-4165-5-51
90
A
10.6
12.6
14.6
18.6
20.6
B
7.6
9.6
11.6
15.6
17.6
C
3.2
3.2
3.2
3.2
3.2
Unit: mm
D
3.9
3.9
3.9
3.9
3.9
Note 1: Order by number of reels.
Note 2: Connectors with 60 or 100 contacts may have several recessed areas in this location. Pick-and-place operation will NOT be affected.
.
Note 3: No conductive traces through the areas indicated by
Refer to Ill.1 and Ill.2. for specific restrictions and exception to the above requirement.
Note 4: This connector is NOT polarized.
6
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Header
A±0.2
B±0.08
1.85±0.2
2.97±0.2
P=0.4±0.05
1.14±0.15
0.15±0.02
Pick-and-place area : C±0.2
■Recommended PCB mounting pattern
B±0.02
0.65±0.02
0.3±0.02
0
2.05 -0.05
3.37 +0.05
0
P=0.4±0.02
0.23±0.02
0.35±0.02
[Specification number]
(51): Embossed tape packaging (5,000 pieces per reel)
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
DF40C- 10DP-0.4V(51)
684-4035-0-51
10
3.52
1.6
1.0
DF40C- 12DP-0.4V(51)
684-4149-9-51
12
3.92
2.0
1.0
DF40C- 20DP-0.4V(51)
684-4010-9-51
20
5.52
3.6
1.0
DF40C- 24DP-0.4V(51)
684-4011-1-51
24
6.32
4.4
1.2
DF40C- 30DP-0.4V(51)
684-4012-4-51
30
7.52
5.6
1.5
DF40C- 34DP-0.4V(51)
684-4024-3-51
34
8.32
6.4
2.3
DF40C- 40DP-0.4V(51)
684-4013-7-51
40
9.52
7.6
3.2
DF40C- 44DP-0.4V(51)
684-4077-0-51
44
10.32
8.4
3.2
DF40C- 50DP-0.4V(51)
684-4014-0-51
50
11.52
9.6
3.2
DF40C- 60DP-0.4V(51)
684-4003-3-51
60
13.52
11.6
3.2
DF40C- 70DP-0.4V(51)
684-4015-2-51
70
15.52
13.6
3.2
DF40C- 80DP-0.4V(51)
684-4001-8-51
80
17.52
15.6
3.2
DF40C- 90DP-0.4V(51)
684-4125-0-51
90
19.52
17.6
3.2
DF40C-100DP-0.4V(51)
684-4032-1-51
100
21.52
19.6
3.2
Note 1: Order by number of reels.
Note 2: 60 or 100 positions connectors will not have small interlock indentations in the contact areas.
Note 3: The contacts in each of the 4 corners serve as metal solder brackets only and should NOT be used for current carrying.
Note 4: Location of the HRS logo and cavity identification mark may differ from what is shown.
Note 5: This connector is not polarized.
7
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Packaging Specification
F-F
Part number label
C±0.1
.8
±0
Ø21
A
0˚
0˚
12
12
B±0.1
A±0.3
2±0.5
Ø380±2
Ø80±1
F
2±0.1
● Reel Dimensions
Ø1
3±
0.2
1
0.
+ 0
.5
Ø1
4±0.1
1.75±0.1
● E
mbossed Carrier Tape Dimensions
- Receptacle (stacking Height : 1.5mm)
G
8±0.1
H
H
.1
+00
5
0.7
R
E±0.5
D±1
0.3±0.1
F
G-G
1.65±0.15
0.2±0.05
A
G
Unreeling direction
.1
+0 0
.75
R0
● Stacking Height : 1.5mm
Unit: mm
Part Number
A
B
C
D
E
DF40C- 10DS-0.4V(51)
16.0
----
7.5
21.5
17.5
DF40C- 12DS-0.4V(51)
16.0
----
7.5
21.5
17.5
DF40C- 20DS-0.4V(51)
16.0
----
7.5
21.5
17.5
DF40C- 24DS-0.4V(51)
16.0
----
7.5
21.5
17.5
DF40C- 30DS-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 34DS-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 40DS-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 50DS-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 60DS-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 70DS-0.4V(51)
32.0
28.4
14.2
37.5
33.5
DF40C- 80DS-0.4V(51)
32.0
28.4
14.2
37.5
33.5
DF40C- 90DS-0.4V(51)
44.0
40.4
20.2
49.5
45.5
DF40C-100DS-0.4V(51)
44.0
40.4
20.2
49.5
45.5
Note : Bottom side deed holes are added to embossed tape when A = 32.0 or greater
8
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.1
+0 0
.5
H
Part number label
H-H
2±0.5
Ø1
3±
0.2
Ø1
4±0.1
2±0.1
● Reel Dimensions
0.8
1±
Ø2
1.75±0.1
● Embossed Carrier Tape Dimensions
- Receptacle (stacking Height : 2.0mm to 3.0mm)
J
G
G
8±0.1
J
Ø80±1
Ø380±2
0˚
E±0.5
D±1
0.3±0.1
H
.1
+0 0
Unreeling direction
.75
R0
G-G
F±0.15
0.2±0.05
B±0.1
A±0.3
0˚
12
12
C±0.1
5
.1
+00
.75
R0
● Stacking Height : 2.0mm
Part Number
A
DF40C(2.0)-12DS-0.4V(51)
DF40C(2.0)-20DS-0.4V(51)
DF40C(2.0)-24DS-0.4V(51)
DF40C(2.0)-30DS-0.4V(51)
DF40C(2.0)-40DS-0.4V(51)
DF40C(2.0)-44DS-0.4V(51)
DF40C(2.0)-50DS-0.4V(51)
DF40C(2.0)-60DS-0.4V(51)
DF40C(2.0)-70DS-0.4V(51)
DF40C(2.0)-80DS-0.4V(51)
16.0
16.0
16.0
24.0
24.0
24.0
24.0
24.0
32.0
32.0
B
-------------------------
28.4
28.4
C
D
E
7.5
7.5
7.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
21.5
21.5
21.5
29.5
29.5
29.5
29.5
29.5
37.5
37.5
17.5
17.5
17.5
25.5
25.5
25.5
25.5
25.5
33.5
33.5
● Stacking Height : 2.5mm
Part Number
A
DF40HC(2.5)-20DS-0.4V(51)
DF40HC(2.5)-30DS-0.4V(51)
DF40HC(2.5)-40DS-0.4V(51)
DF40HC(2.5)-50DS-0.4V(51)
DF40HC(2.5)-60DS-0.4V(51)
Unit: mm
F
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
Unit: mm
F
C
D
E
16.0
24.0
24.0
24.0
24.0
B
----------------
7.5
11.5
11.5
11.5
11.5
21.5
29.5
29.5
29.5
29.5
17.5
25.5
25.5
25.5
25.5
Part Number
A
B
C
D
E
F
DF40HC(3.0)-30DS-0.4V(51)
DF40HC(3.0)-44DS-0.4V(51)
DF40HC(3.0)-50DS-0.4V(51)
DF40HC(3.0)-60DS-0.4V(51)
DF40HC(3.0)-70DS-0.4V(51)
DF40HC(3.0)-80DS-0.4V(51)
DF40HC(3.0)-90DS-0.4V(51)
DF40HC(3.0)-100DS-0.4V(51)
24.0
24.0
24.0
24.0
32.0
32.0
44.0
44.0
-------------
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
29.5
29.5
29.5
29.5
37.5
37.5
49.5
49.5
25.5
25.5
25.5
25.5
33.5
33.5
45.5
45.5
3.15
3.15
3.15
3.15
3.15
3.15
3.15
3.15
● Stacking Height : 3.0mm
2.72
2.72
2.72
2.72
2.72
Unit: mm
28.4
28.4
40.4
40.4
Note : Bottom side deed holes are added to embossed tape when A = 32.0 or greater
9
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
±0
Ø80±1
Ø380±2
12
C±0.1
0˚
12
B±0.1
A±0.3
2±0.5
.2
Part number label
H-H
0.8
1±
Ø2
.1
+0 0
.5
H
Ø1
3
4±0.1
● Reel Dimensions
0˚
Ø1
2±0.1
1.75±0.1
● Embossed Carrier Tape Dimensions
- Receptacle (stacking Height : 3.5mm to 4.0mm)
0.2±0.05
8±0.1
E±0.5
D±1
G
.1
+00
J
5
0.7
R
0.4±0.1
H
J
G-G
F±0.15
G
Unreeling Dimension
.1
+00
.75
R0
● Stacking Height : 3.5mm
Unit: mm
Part Number
A
B
C
D
E
F
DF40HC(3.5)-30DS-0.4V(51)
24.0
----
11.5
29.5
25.5
3.72
DF40HC(3.5)-50DS-0.4V(51)
24.0
----
11.5
29.5
25.5
3.72
DF40HC(3.5)-60DS-0.4V(51)
24.0
----
11.5
29.5
25.5
3.72
DF40HC(3.5)-80DS-0.4V(51)
32.0
28.4
14.2
37.5
33.5
3.72
Part Number
A
B
C
D
E
F
DF40HC(4.0)-40DS-0.4V(51)
24.0
----
11.5
29.5
25.5
4.22
DF40HC(4.0)-50DS-0.4V(51)
24.0
----
11.5
29.5
25.5
4.22
DF40HC(4.0)-60DS-0.4V(51)
24.0
----
11.5
29.5
25.5
4.22
DF40HC(4.0)-80DS-0.4V(51)
32.0
28.4
14.2
37.5
33.5
4.22
DF40HC(4.0)-90DS-0.4V(51)
44.0
40.4
20.2
49.5
45.5
4.22
● Stacking Height : 4.0mm
Unit: mm
Note : Bottom side deed holes are added to embossed tape when A = 32.0 or greater
10
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
Ø1
.5
.1
+0 0
2±0.1
1.75±0.1
● Embossed Carrier Tape Dimensions - Header
4±0.1
F
● Reel Dimensions
F-F
Part number label
.2
±0
B±0.1
A±0.3
G
.1
+00
5
.7
Ø0
0.3±0.1
F
G-G
1.34±0.15
0.2±0.05
H
H
Ø80±1
0˚
A
12
0˚
12
E±0.5
D±1
A
G
Ø380±2
C±0.1
0.8
Ø1
3
1±
Ø2
2±0.5
Unreeling Dimension
.1
+0 0
.75
Ø0
Unit: mm
Part Number
A
B
C
D
E
DF40C- 10DP-0.4V(51)
12.0
----
5.5
17.5
13.5
DF40C- 12DP-0.4V(51)
12.0
----
5.5
17.5
13.5
DF40C- 20DP-0.4V(51)
16.0
----
7.5
21.5
17.5
DF40C- 24DP-0.4V(51)
16.0
----
7.5
21.5
17.5
DF40C- 30DP-0.4V(51)
16.0
----
7.5
21.5
17.5
DF40C- 34DP-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 40DP-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 44DP-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 50DP-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 60DP-0.4V(51)
24.0
----
11.5
29.5
25.5
DF40C- 70DP-0.4V(51)
32.0
28.4
14.2
37.5
33.5
DF40C- 80DP-0.4V(51)
32.0
28.4
14.2
37.5
33.5
DF40C- 90DP-0.4V(51)
44.0
40.4
20.2
49.5
45.5
DF40C-100DP-0.4V(51)
44.0
40.4
20.2
49.5
45.5
Note : Bottom side deed holes are added to embossed tape when A = 32.0 or greater
11
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Usage Recommendations
1.Recommended temperature
profile
Temperature (ç)
250ç
250ç
220ç
200ç
60sec.max.
180ç
150ç 150ç
90 to 120sec.
100ç
50ç
Room temperature
0sec.
50sec.
100sec. 150sec. 200sec. 250sec. 300sec. (Time)
Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions,
provided that there is a return to normal temperature between the first and
second cycle.
Note 2: The temperature profile indicates the board surface temperature at the point of
contacts with the connector terminals.
2.Recommended manual soldering
Manual soldering: 340±10ç for 3 seconds
3.Recommended screen thickness and
Thickness: 0.12 mm
open area ratio (Pattern area ratio)
Open area ratio: 80%
4.Board warpage
Maximum of 0.02 mm at the connector center, with both ends of the connector as reference points.
5.Cleaning conditions
Cleaning is not recommended. When cleaning, please evaluate as if can deteriorate the
performance including mechanical operation and environmental resistance.
6.Precautions
* Mating and un-mating of the connectors when not soldered on the boards is not recommended
as this may cause deformation of the terminals, damage to the contacts or insulators.
■Mated
connectors should not carry weight of the board by themselves.
Provide some other support of the boards.
■When
mating/un-mating do not twist or lift by the corners.
Apply the forces evenly across the entire length and width of the connectors taking care NOT to
damage or deform soldered terminations.
■E
xercise extreme caution when mating/ un-mating when the connector is mounted on a nonrigid (flexible) substrate.
■Do
NOT pull on the flexible substrate.
■Slight discoloration on the insulating materials will not affect form, fit or function of the connectors.
12
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Handling Precautions when mating the connectors
DF40*-*DP-0.4V
Header
DF40*-*DS-0.4V
Receptacle
Keep the connectors parallel to each other when
positioning
Do not attempt to mate the connectors staring at one end
or side.
Press-down evenly until slight resistance is felt.
Overcoming this slight resistance will complete the
mating receptacle with the header. A definite “click”
sensation will confirm the fully mated condition.
13
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Handling Precautions when un-mating the connectors
DF40*-*DS-0.4V
Fully mated
DF40*-*DP-0.4V
Lift even one side, keeping both boards parallel to each other.
When handling, circumstances prevent the connector from
being kept level during the un-mating. One end may be lifted
separate as shown.
However, to utilize this procedure the connector must be
mounted on a sufficiently rigid circuit board.
Any deflection of the board during this operation may result in
damage to the connectors or solder joints.
Pitch Orientation
Corner Orientation
Do not attempt the start of the un-mating of the connectors
from one side or corner.
When un-mating is from the width orientation, as illustrated in
the diagram to the left, connector could be damaged. Do not
remove from the width orientation.
Width Orientation
14
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
■Handling Precautions when un-mating the connectors
FPC
Receptacle
Low rigidity FPC should not be used for mounting of the
receptacle.
Un-mating of the connectors when the receptacle is mounted
on the extremely flexible FPC can result in solder joint failure
or damage to the connector itself.
Header
It is highly recommended that the receptacle be mounted on
the rigid PCB and the header on the FPC.
Header
Contact HRS when specific application requires mounting of
the receptacle on the FPC.
All published performance data is based on connectors
mounted on rigid FPC and PCB.
Receptacle
Failure to exercise caution when un-mating connectors
mounted on the non-rigid FPC may also result in connector
breakage.
15
DF40 Series●0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
20400 Stevens Creek Blvd., Ste 250, Cupertino,
CA 95014
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
37677 Professional Center Drive, Suite #100C
Livonia, MI 48154
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hiroseusa.com
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hiroseeurope.com
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.de
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : +44-1908-369060
Fax : +44-1908-369078
http://www.hirose.co.uk
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601,Henderson Metropolitan,NO.300 ,East Nanjing
Road,Huangpu District, Shanghai,China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose-china.com.cn
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose-hongkong.com.hk
TAIWAN:
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No.03, Ground Floor, Explorer Building International Tech
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
®
16
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose-taiwan.com.tw
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 03/2012. Contents are subject to change without notice for the purpose of improvements.