0.5mm Pitch SMT Board to Board Connector DF16 Series Correspond to Automatic Mounting The vacuum pick-up area is prepared for automatic mounting machine. ■Features 1. Miniaturizing and Slimming In addition to 0.5mm pitch miniaturization, board to stacking height of 2mm and 2.5mm are prrovided. Header Receptacle commonly uses DF16#-*DS-0.5V. Header 2±0.15 2.5±0.15 Header Product Name Receptacle Stacking Height DF16#(2.0)-*DP-0.5V 2.0mm DF16#(2.5)-*DP-0.5V 2.5mm Receptacle Note1: The stacking height doesn't include the solder paste thickness. 2. High Contact Reliability The bellows female contact has a sufficient spring characteristic despite the low profile, and achieves high contact reliability. 3. Click Sensitivity in Mating The click feeling is considered to facilitate insertion check when the connector is mated. 4. Metal Fitting Available The metal fitting to prevent the solder peel is provided, considering the mounting on FPC. 5. Corresponding to Automatic Mounting The connector has the vacuum pick-up area, and enables the automatic mounting with the embossed tape packaging. Connector specification with no boss and no fitting is also. ■Applications Mobile phone, LCD(Liquid Crystal Display), and so on A308 ■Product Specifications Operating Temperature Range : –35 to +85ç (Note 1) Storage Temperature Range : –10 to +60ç (Note 2) Current rating : 0.3A Rating Voltage rating : 50V AC Operating Humidity Range : 40 to 80% Item Storage Humidity Range Specification : 40 to 70% (Note 2) Condition 1. Insulation Resistance 500M ohms min 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 150V AC/1 minute 3. Contact Resistance 50m ohms max 100mA 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 50m ohms max.Insulation resistance:250M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 50m ohms max.:Insulation resistance: 500M ohms min. (-55ç: 30 minutes 5 to 35ç: 10 minutes (-85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 50m ohms 8. Resistance to Soldering heat 50cycle No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Product Receptacle Part Material Treatment UL Standard Insulator Polyamide resin White Beige (Natural) UL94V-0 Contact Phosphor copper Gold plated ––––––– Metal fitting Brass Tin-lead plated ––––––– Insulator Polyamide resin White Beige (Natural) UL94V-0 Contact Phosphor copper Gold plated ––––––– Metal fitting Brass Tin-lead plated ––––––– Header ■Ordering Information Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog page A310~A315. ●Receptacle/Header DF16 q q Series Name w e r t e Product height : DF16 w Type Blank # (* **) - * DS - 0.5 V (* **) Fitting Boss K K A ∞ K B K ∞ C ∞ ∞ y u i y Contact Pitch Receptacle : None Header : 2.0, 2.5 r Number of Contacts : 0.5mm u Contact Type V : Straight SMT 14, 16, 20, 30, 34, 40, 50, 60, 80 i Pakaging Type (Note1) t Connector Type (81) : Gold plating, embossed tape packaging (80) : Gold plating, tube packaging DS : Double-row receptacle DP : Double-row header Note1: For the 14, 16 and 80 contacts connector, the stacking height 2.0mm product only is available. For the 34 contacts connectors, the stacking height of 2.5mm product only is available. A309 ■Receptacle With metal fitting A B C 7 5.8 P=0.5 0.65 1.95 0.2 0.2 Ø0.5 D E F 1.5 3.8 2 G [Specific No.] –* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging ●Receptacle with metal fitting, with boss Unit: mm Number of Contacts A B C D E F G Tube Packaging Quantity( pcs.) DF16-14DS-0.5V(**) 679-0010-1-** 14 19.0 06.8 03.0 08.8 07.8 06.4 05.6 54 pcs. DF16-16DS-0.5V(**) 679-0001-0-** 16 09.5 07.3 03.5 09.3 08.3 06.9 06.1 51 pcs. DF16-20DS-0.5V(**) 679-0002-3-** 20 10.5 08.3 04.5 10.3 09.3 07.9 06.5 46 pcs. DF16-30DS-0.5V(**) 679-0003-6-** 30 13.0 10.8 07.0 12.8 11.8 10.4 09.0 37 pcs. DF16-34DS-0.5V(**) 679-0009-2-** 34 14.0 11.8 08.0 13.8 12.8 11.4 10.0 35 pcs. DF16-40DS-0.5V(**) 679-0004-9-** 40 15.5 13.3 09.5 15.3 14.3 12.9 11.5 31 pcs. DF16-50DS-0.5V(**) 679-0005-1-** 50 18.0 15.8 12.0 17.8 16.8 15.4 14.0 27 pcs. DF16-60DS-0.5V(**) 679-0006-4-** 60 20.5 18.3 14.5 20.3 19.3 17.9 16.5 23 pcs. DF16-80DS-0.5V(**) 679-0008-0-** 80 25.5 23.3 19.5 25.3 24.3 22.9 21.5 19 pcs. Part Number CL No. ●Receptacle with metal fitting, without boss A B C D E F G Tube Packaging Quantity( pcs.) DF16B-14DS-0.5V(**) 679-0030-9-** 14 09.0 06.8 03.0 08.8 07.8 06.4 ––– 54 pcs. DF16B-16DS-0.5V(**) 679-0021-8-** 16 09.5 07.3 03.5 09.3 08.3 06.9 ––– 51 pcs. DF16B-20DS-0.5V(**) 679-0022-0-** 20 10.5 08.3 04.5 10.3 09.3 07.9 ––– 46 pcs. DF16B-30DS-0.5V(**) 679-0023-3-** 30 13.0 10.8 07.0 12.8 11.8 10.4 ––– 37 pcs. DF16B-34DS-0.5V(**) 679-0029-0-** 34 14.0 11.8 08.0 13.8 12.8 11.4 ––– 35 pcs. DF16B-40DS-0.5V(**) 679-0024-6-** 40 15.5 13.3 09.5 15.3 14.3 12.9 ––– 31 pcs. DF16B-50DS-0.5V(**) 679-0025-9-** 50 18.0 15.8 12.0 17.8 16.8 15.4 ––– 27 pcs. DF16B-60DS-0.5V(**) 679-0026-1-** 60 20.5 18.3 14.5 20.3 19.3 17.9 ––– 23 pcs. DF16B-80DS-0.5V(**) 679-0028-7-** 80 25.5 23.3 19.5 25.3 24.3 22.9 ––– 19 pcs. Part Number A310 Unit: mm Number of Contacts CL No. ■Receptacle Without metal fitting Ａ Ｂ Ｃ 7 5.8 P=0.5 0.65 0.2 0.2 Ø0.5 2 Ｇ [Specific No.] –* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging ●Receptacle without metal fitting, with boss Unit: mm Number of Contacts A B C G Tube Packaging Quantity( pcs.) DF16A-14DS-0.5V(**) 679-0020-5-** 14 09.0 06.8 03.0 05.6 54 pcs. DF16A-16DS-0.5V(**) 679-0011-4-** 16 09.5 07.3 03.5 06.1 51 pcs. DF16A-20DS-0.5V(**) 679-0012-7-** 20 10.5 08.3 04.5 06.5 46 pcs. DF16A-30DS-0.5V(**) 679-0013-0-** 30 13.0 10.8 07.0 09.0 37 pcs. DF16A-34DS-0.5V(**) 679-0019-6-** 34 14.0 11.8 08.0 10.0 35 pcs. DF16A-40DS-0.5V(**) 679-0014-2-** 40 15.5 13.3 09.5 11.5 31 pcs. DF16A-50DS-0.5V(**) 679-0015-5-** 50 18.0 15.8 12.0 14.0 27 pcs. DF16A-60DS-0.5V(**) 679-0016-8-** 60 20.5 18.3 14.5 16.5 23 pcs. DF16A-80DS-0.5V(**) 679-0018-3-** 80 25.5 23.3 19.5 21.5 19 pcs. Part Number CL No. ●Receptacle without metal fitting, without boss Unit: mm Number of Contacts A B C G Tube Packaging Quantity( pcs.) DF16C-14DS-0.5V(**) 679-0040-2-** 14 09.0 06.8 03.0 ––– 54 pcs. DF16C-16DS-0.5V(**) 679-0031-1-** 16 09.5 07.3 03.5 ––– 51 pcs. DF16C-20DS-0.5V(**) 679-0032-4-** 20 10.5 08.3 04.5 ––– 46 pcs. DF16C-30DS-0.5V(**) 679-0033-7-** 30 13.0 10.8 07.0 ––– 37 pcs. DF16C-34DS-0.5V(**) 679-0039-3-** 34 14.0 11.8 08.0 ––– 35 pcs. DF16C-40DS-0.5V(**) 679-0034-0-** 40 15.5 13.3 09.5 ––– 31 pcs. DF16C-50DS-0.5V(**) 679-0035-2-** 50 18.0 15.8 12.0 ––– 27 pcs. DF16C-60DS-0.5V(**) 679-0036-5-** 60 20.5 18.3 14.5 ––– 23 pcs. DF16C-80DS-0.5V(**) 679-0038-0-** 80 25.5 23.3 19.5 ––– 19 pcs. Part Number CL No. A311 ■Board to Board 2mm Header With metal fitting Ａ Ｂ 2.3 3.8 Ｐ＝0.5 0.65 1.55 0.25 0.2 Ø0.5 Ｃ Ｄ 1.5 0.85 Ｅ [Specific No.] –* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging ●Board to Board 2mm Header with metal fitting, with boss Unit: mm Number of Contacts A B C D E Tube Packaging Quantity( pcs.) DF16(2.0)-14DP-0.5V(**) 679-0049-7-** 14 06.7 03.0 06.5 05.3 04.4 73 pcs. DF16(2.0)-16DP-0.5V(**) 679-0041-5-** 16 07.2 03.5 07.0 05.8 04.9 68 pcs. DF16(2.0)-20DP-0.5V(**) 679-0042-8-** 20 08.2 04.5 08.0 06.8 05.9 59 pcs. DF16(2.0)-30DP-0.5V(**) 679-0043-0-** 30 10.7 07.0 10.5 09.3 08.4 45 pcs. DF16(2.0)-40DP-0.5V(**) 679-0044-3-** 40 13.2 09.5 13.0 11.8 10.9 37 pcs. DF16(2.0)-50DP-0.5V(**) 679-0045-6-** 50 15.7 12.0 15.5 14.3 13.4 31 pcs. DF16(2.0)-60DP-0.5V(**) 679-0046-9-** 60 18.2 14.5 18.0 16.8 15.9 26 pcs. DF16(2.0)-80DP-0.5V(**) 679-0048-4-** 80 23.2 19.5 23.0 21.8 20.9 21 pcs. Part Number CL No. ●Board to Board 2mm Header with metal fitting, without boss A312 Unit: mm Number of Contacts A B C D E Tube Packaging Quantity( pcs.) DF16B(2.0)-14DP-0.5V(**) 679-0069-4-** 14 06.7 03.0 06.5 05.3 ––– 73 pcs. DF16B(2.0)-16DP-0.5V(**) 679-0061-2-** 16 07.2 03.5 07.0 05.8 ––– 68 pcs. DF16B(2.0)-20DP-0.5V(**) 679-0062-5-** 20 08.2 04.5 08.0 06.8 ––– 59 pcs. DF16B(2.0)-30DP-0.5V(**) 679-0063-8-** 30 10.7 07.0 10.5 09.3 ––– 45 pcs. DF16B(2.0)-40DP-0.5V(**) 679-0064-0-** 40 13.2 09.5 13.0 11.8 ––– 37 pcs. DF16B(2.0)-50DP-0.5V(**) 679-0065-3-** 50 15.7 12.0 15.5 14.3 ––– 31 pcs. DF16B(2.0)-60DP-0.5V(**) 679-0066-6-** 60 18.2 14.5 18.0 16.8 ––– 26 pcs. DF16B(2.0)-80DP-0.5V(**) 679-0068-1-** 80 23.2 19.5 23.0 21.8 ––– 21 pcs. Part Number CL No. ■Board to Board 2mm Header Without metal fitting A B 2.3 3.8 P=0.5 1.55 0.25 0.2 0.65 Ø0.5 0.85 E [Specific No.] –* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging ●Board to Board 2mm Header without metal fitting, with boss Unit: mm Number of Contacts A B E Tube Packaging Quantity( pcs.) DF16A(2.0)-14DP-0.5V(**) 679-0059-0-** 14 06.7 03.0 04.4 73 pcs. DF16A(2.0)-16DP-0.5V(**) 679-0051-9-** 16 07.2 03.5 04.9 68 pcs. DF16A(2.0)-20DP-0.5V(**) 679-0052-1-** 20 08.2 04.5 05.9 59 pcs. DF16A(2.0)-30DP-0.5V(**) 679-0053-4-** 30 10.7 07.0 08.4 45 pcs. DF16A(2.0)-40DP-0.5V(**) 679-0054-7-** 40 13.2 09.5 10.9 37 pcs. DF16A(2.0)-50DP-0.5V(**) 679-0055-0-** 50 15.7 12.0 13.4 31 pcs. DF16A(2.0)-60DP-0.5V(**) 679-0056-2-** 60 18.2 14.5 15.9 26 pcs. DF16A(2.0)-80DP-0.5V(**) 679-0058-8-** 80 23.2 19.5 20.9 21 pcs. Part Number CL No. ●Board to Board 2mm Header without metal fitting, without boss Unit: mm Number of Contacts A B E Tube Packaging Quantity( pcs.) DF16C(2.0)-14DP-0.5V(**) 679-0079-8-** 14 06.7 03.0 ----- 73 pcs. DF16C(2.0)-16DP-0.5V(**) 679-0071-6-** 16 07.2 03.5 ----- 68 pcs. DF16C(2.0)-20DP-0.5V(**) 679-0072-9-** 20 08.2 04.5 ----- 59 pcs. DF16C(2.0)-30DP-0.5V(**) 679-0073-1-** 30 10.7 07.0 ----- 45 pcs. DF16C(2.0)-40DP-0.5V(**) 679-0074-4-** 40 13.2 09.5 ----- 37 pcs. DF16C(2.0)-50DP-0.5V(**) 679-0075-7-** 50 15.7 12.0 ----- 31 pcs. DF16C(2.0)-60DP-0.5V(**) 679-0076-0-** 60 18.2 14.5 ----- 26 pcs. DF16C(2.0)-80DP-0.5V(**) 679-0078-5-** 80 23.2 19.5 ----- 21 pcs. Part Number CL No. A313 ■Board to Board 2.5mm Header With metal fitting A B 2.3 3.8 P=0.5 2.05 0.25 0.2 0.65 Ø0.5 C D 1.5 0.85 E [Specific No.] –* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging ●Board to Board 2.5mm Header with metal fitting, with boss Unit: mm Number of Contacts A B C D E Tube Packaging Quantity( pcs.) DF16(2.5)-20DP-0.5V(**) 679-0082-2-** 20 08.2 04.5 08.0 06.8 05.9 59 pcs. DF16(2.5)-30DP-0.5V(**) 679-0083-5-** 30 10.7 07.0 10.5 09.3 08.4 45 pcs. DF16(2.5)-34DP-0.5V(**) 679-0089-1-** 34 11.7 08.0 11.5 10.3 09.4 42 pcs. DF16(2.5)-40DP-0.5V(**) 679-0084-8-** 40 13.2 09.5 13.0 11.8 10.9 37 pcs. DF16(2.5)-50DP-0.5V(**) 679-0085-0-** 50 15.7 12.0 15.5 14.3 13.4 31 pcs. DF16(2.5)-60DP-0.5V(**) 679-0086-3-** 60 18.2 14.5 18.0 16.8 15.9 26 pcs. Part Number CL No. ●Board to Board 2.5mm Header with metal fitting, without boss Number of Contacts A B C D E Tube Packaging Quantity( pcs.) DF16B(2.5)-20DP-0.5V(**) 679-0102-8-** 20 08.2 04.5 08.0 06.8 ----- 59 pcs. DF16B(2.5)-30DP-0.5V(**) 679-0103-0-** 30 10.7 07.0 10.5 09.3 ----- 45 pcs. DF16B(2.5)-34DP-0.5V(**) 679-0109-7-** 34 11.7 08.0 11.5 10.3 ----- 42 pcs. DF16B(2.5)-40DP-0.5V(**) 679-0104-3-** 40 13.2 09.5 13.0 11.8 ----- 37 pcs. DF16B(2.5)-50DP-0.5V(**) 679-0105-6-** 50 15.7 12.0 15.5 14.3 ----- 31 pcs. DF16B(2.5)-60DP-0.5V(**) 679-0106-9-** 60 18.2 14.5 18.0 16.8 ----- 26 pcs. Part Number A314 Unit: mm CL No. ■Board to Board 2.5mm Header Without metal fitting A B 2.3 3.8 P=0.5 0.25 2.05 0.2 0.65 Ø0.5 0.85 E [Specific No.] –* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging ●Board to Board 2.5mm Header without metal fitting, with boss Unit: mm Number of Contacts A B E Tube Packaging Quantity( pcs.) DF16A(2.5)-20DP-0.5V(**) 679-0092-6-** 20 08.2 04.5 05.9 59 pcs. DF16A(2.5)-30DP-0.5V(**) 679-0093-9-** 30 10.7 07.0 08.4 45 pcs. DF16A(2.5)-34DP-0.5V(**) 679-0099-5-** 34 11.7 08.0 09.4 42 pcs. DF16A(2.5)-40DP-0.5V(**) 679-0094-1-** 40 13.2 09.5 10.9 37 pcs. DF16A(2.5)-50DP-0.5V(**) 679-0095-4-** 50 15.7 12.0 13.4 31 pcs. DF16A(2.5)-60DP-0.5V(**) 679-0096-7-** 60 18.2 14.5 15.9 26 pcs. Part Number CL No. ●Board to Board 2.5mm Header without metal fitting, without boss Unit: mm Number of Contacts A B E Tube Packaging Quantity( pcs.) DF16C(2.5)-20DP-0.5V(**) 679-0112-1-** 20 08.2 04.5 ----- 59 pcs. DF16C(2.5)-30DP-0.5V(**) 679-0113-4-** 30 10.7 07.0 ----- 45 pcs. DF16C(2.5)-34DP-0.5V(**) 679-0119-0-** 34 11.7 08.0 ----- 42 pcs. DF16C(2.5)-40DP-0.5V(**) 679-0114-7-** 40 13.2 09.5 ----- 37 pcs. DF16C(2.5)-50DP-0.5V(**) 679-0115-0-** 50 15.7 12.0 ----- 31 pcs. DF16C(2.5)-60DP-0.5V(**) 679-0116-2-** 60 18.2 14.5 ----- 26 pcs. Part Number CL No. A315 ■Recommended PCB mounting pattern ●Receptacle M +0.1 0 N +0.1 0 C±0.03 2.7 0 +0.1 0 7.6 5.4 -0.1 +0.1 2.1 0 2±0.03 P=0.5±0.02 0.25±0.02 Ø0 .6 +0 0 .05 G±0.03 (N o te 2) Note1: If the pattern is included in the shaded area, and is not treated with resist, it could touch the connector contact. Note2: If the boss isn't included, the boss hole shown in the above isn't required. Number of Contacts C G M N 14 03.0 05.0 09.4 05.8 16 03.5 05.5 09.9 06.3 20 04.5 06.5 10.9 07.3 30 07.0 09.0 13.4 09.8 34 08.0 10.0 14.4 10.8 40 09.5 11.5 15.9 12.3 50 12.0 14.0 18.4 14.8 60 14.5 16.5 20.9 17.3 80 19.5 21.5 25.9 22.3 ●Header (Board to Board 2.0, 2.5mm) 2.1 0.85±0.03 4.4 +0.1 0 0 2.2 -0.1 7 P=0.5±0.02 0.25±0.02 +0.1 0 G +0.1 0 0 H -0.1 B±0.03 Ø0 .6 E±0.03 K +0 . 0 05 (N ote 2) Note1: If the pattern is included in the shaded area, and is not treated with resist, it could touch the connector contact . Note2: If the boss isn't included, the boss hole shown in the above isn't required. Note3: Don't install any part in the shaded area. If installed, the connectors can't be mated with each other. A316 Number of Contacts B E G H K 14 03.0 04.4 07.4 05.4 09.0 16 03.5 04.9 07.9 05.9 09.5 20 04.5 05.9 08.9 06.9 10.5 30 07.0 08.4 11.4 09.4 13.0 34 08.0 09.4 12.4 10.4 14.0 40 09.5 10.9 13.9 11.9 15.5 50 12.0 13.4 16.4 14.4 18.0 60 14.5 15.9 18.9 16.9 20.5 80 19.5 20.9 23.9 21.9 25.5 ■Embossed Carrier Tape Dimensions ●Receptacle ●Reel Dimensions 0. 8 2±0.5 .1 +0 0 5 4±0.1 Product name label Ø1.5Lead hole depth Ｙ−Ｙ Ｌ±0.1 (Ø80±1) Ｙ Ø2 1. 1.75±0.1 φ 1± 2±0.1 Ø330±2 12±0.1 0.2 3± Ø1 0.2±0.05 .1 +00 .75 R0 0.3±0.1 2±0.5 Q 2±0.5 Q +2 0 2.2±0.15Ł Ｘ .1 +0 0 .75 R0 Ｘ Ｎ±0.3 Ｍ±0.1 Ｘ−Ｘ Ｙ Unreeling direction ●Header ●Reel Dimensions 1± 0. 8 2±0.5 Ø2 2±0.1 Ø1.5Lead hole depth 1. 0.2 3± Ø1 Ｌ±0.1 1 0. + 0 5 Ｙ−Ｙ (Ø80±1) φ Y 1.75±0.1 Product name label 4±0.1 Ø330±2 12±0.1 .7 5 0.2±0.05 .1 +00 R0 0.3±0.1 +2 0 （2.0） 1.9±0.15 （2.5） 2.4±0.15 Ｘ .1 +0 0 .75 R0 Ｘ Ｎ±0.3 Ｍ±0.1 Ｘ−Ｘ Ｙ Unreeling direction N M L Q DF16#-14DS-0.5V Product Name 24.0 ----- 11.5 24.4 DF16#-16DS-0.5V 24.0 ----- 11.5 24.4 DF16#-20DS-0.5V 24.0 ----- 11.5 24.4 DF16#-30DS-0.5V 24.0 ----- 11.5 24.4 DF16#-34DS-0.5V 24.0 ----- 11.5 24.4 DF16#-40DS-0.5V 32.0 28.4 14.2 32.4 DF16#-50DS-0.5V 32.0 28.4 14.2 32.4 DF16#-60DS-0.5V 32.0 28.4 14.2 32.4 DF16#-80DS-0.5V 44.0 40.4 20.2 44.4 DF16#(2.0)-14DP-0.5V 16.0 ----- 07.5 16.4 DF16#(2.0)-16DP-0.5V 16.0 ----- 07.5 16.4 DF16#(2.0)-34DP-0.5V 24.0 ----- 11.5 24.4 DF16#(2.0/2.5)-20DP-0.5V 16.0 ----- 07.5 16.4 DF16#(2.0/2.5)-30DP-0.5V 24.0 ----- 11.5 24.4 DF16#(2.0/2.5)-40DP-0.5V 24.0 ----- 11.5 24.4 DF16#(2.0/2.5)-50DP-0.5V 24.0 ----- 11.5 24.4 DF16#(2.0/2.5)-60DP-0.5V 32.0 28.4 14.2 32.4 DF16#(2.0/2.5)-80DP-0.5V 44.0 40.4 20.2 44.4 A317 BPrecautions Temperature 250ç IR reflow condition Preheating area 150ç Soldering area 30 to 90 seconds Max 240ç 235ç±5ç 10 seconds max. 220ç min. 10 to 20 seconds 220ç 200ç 150ç 100ç 1. Recommended Temperature Profile (SMT) Preheating area Soldering area 50ç 0ç 0SSEC 50SSEC 100SSEC 150SSEC 200SSEC Time Note1: Maximun twice actions are allowed under the same condition. However, the interval between the first and second actions must be maintained at the room temperature. Note2: The temperature indicates the board surface temperature of the connector lead area. 2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds 3. Recommended Screen Thickness (SMT) 0.15mm 4. Board Warp (SMT) Maximum 0.2mm in the connector center area, based on the both connector edges 5. Cleaning Condition Refer to the "Nylon Connector Use Hand book". 6. Cautions ■The header is designed in a structure where contacts are exposed. Touching it with bare hands would cause contact failure or electrostatic element damage. ■Where no board is mounted, the insertion or extraction will cause damage or contact deformation. ■Avoid retaining the board with the connector only, and fix the board by any other means than the connector. ■Excessive scoop insertion or extraction may result in damage. ■In the manual soldering process, don't carry out flux coating which will cause a flux blister on the connector. ■The color phase of this product may be slightly different from that of the formed product according to the manufacturing lot. However, the difference doesn't affect the performance. A318