8 7 THIS DRAWING IS UNPUBLISHED. C RELEASED FOR PUBLICATION COPYRIGHT 19 BY AMP INCORPORATED. ,19 6 5 4 3 2 . LOC ALL RIGHTS RESERVED. DY 1 REVISIONS DIST - P LTR DESCRIPTION RR1 63 OF POST MATERIAL, HIGH TEMPERATURE PLASTIC, UL94V-O CONTACT: COPPER ALLOY LATCH: STAINLESS STEEL, TIN PLATING. 0.1 2 FINISH; CONTACT AREA: 0.00025 MIN GOLD PLATE ON 0.001 MIN ALL OVER NICKEL SOLDERING AREA: 0.00005 MIN TO 0.00030 MAX GOLD PLATE 146 PLC DWN APVD HMR RK LSF 13APR2010 SYJ 26APR11 REVISED PER ECR-10-007858 REVISED PER ECO 11 005139 1 OF POST 31.5 DATE 3. TOLERANCES NON-ACCUMULATIVE. D 69.9 67.9 #0.7 0.8 4 PACKAGED IN HARD TRAY. 5 FINISH; CONTACT AREA: 0.00025 MIN GOLD PLATE ON 0.001 MIN ALL OVER NICKEL SOLDERING AREA: BRIGHT TIN LEAD PLATE. 6 PART PACKAGED PER EIA-IS704 STANDARD. REEL DIAMETER SHALL BE 330mm, TAPE WIDTH SHALL BE 88mm, AND TAPE PITCH SHALL BE 36mm. 7 LATCH PLATING: TIN-LEAD FOR P/N: 8-390112-1 ONLY (IDENTICAL TO PREVIOUS P/N: 390112-1) 8 DATE CODE (4-DIGITS), LOCATED AS SHOWN. TO BE INTERPRETED AS FOLLOWS: DIGIT # 1 - LAST DIGIT OF YEAR. DIGITS # 2 AND # 3 - CALENDAR WEEK. DIGIT # 4 - DAY OF THE WEEK (WITH SUNDAYS AS DAY 1). SLOT WIDTH +0.2 62.3 -0.8 PITCH X 29 SPCS= 23.2 0.8 PITCH X 41 SPCS= 32.8 2.5 20 2.1 19.9 D REF 29.9 16 REF 16.1 C C 8 DATE CODE 1 PIN HOUSING MATERIAL IDENTIFICATION SEE DETAIL 0.8 1.2 MECHANICAL KEY CENTERLINE B PITCH X 29 SPCS= 23.2 0.8 4.9 5.6 REF 143 PIN PITCH X 41 SPCS= 32.8 2.1 2.5 Y B B 1.37 -A1.2 X 0.2 TYP 144 PLCS REF OF MODULE BOARD NIL AVAILABLE NATURAL NIL AVAILABLE BLACK 2 144 7-390112-1 NIL AVAILABLE NATURAL 2 144 6-390112-1 6 3-390112-1 NOT AVAILABLE NATURAL 5 144 3-390112-4 4 NIL AVAILABLE NATURAL 2 144 3-390112-1 4 390112-1 NOT AVAILABLE NATURAL 5 144 390112-4 NIL AVAILABLE NATURAL 2 144 390112-1 SUPERSEDED BY REMARKS COLOR 3.7 OF POST 4.5 X 0.8 TYP A Y SECTION X-X ROTATED 90 $CCW SCALE 8:1 OF POST 4.5 SECTION Y-Y ROTATED 90 $CCW SCALE 8:1 THIS DRAWING IS A CONTROLLED DOCUMEN IT IS SUBJECT TO CHANGE AND THE CONT ORGANIZATION SHOULD BE CONTACTED FOR DIMENSIONS: DETAIL SCALE mm B 8:1 6-23-97 CHK 01-21-02 ALAN ANG SF LEONG 108-1739 APPLICATION SPEC #- SEE TABLE 144 8-390112-1 7 FINISH POS PART NO. A TYCO ELECTRONICS SINGAPORE NAME APVD PRODUCT SPEC #0.2 #0.2 #0.2 ##- FINISH 1 DWN W.SORAH TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL AMP 4805 REV 27JUN96 T FOR AMP INCORPORATED. ROLLING ENGINEERING THE LATEST REVISION. 2 114-1114 WEIGHT CUSTOMER DRAWING S.O. DIMM SOCKET ASSY, 0.8mm, 3.3V, 144 POSITION, HIGH PROFILE FOR SDRAM TYPE MODULE SIZE CAGE CODE A1 00779 RESTRICTED TO DRAWING NO 390112 SCALE 4:1 SHEET 1 OF 2 REV RR1 8 7 THIS DRAWING IS UNPUBLISHED. C RELEASED FOR PUBLICATION COPYRIGHT 19 BY AMP INCORPORATED. ,19 6 5 4 3 2 . LOC ALL RIGHTS RESERVED. 1 REVISIONS DIST DY - P LTR DESCRIPTION - C D SEE SHEET 1 DWN APVD - - - 3.8 MAX 4 #0.1 0.1 DATE B COMPONENT AREA D D R 3 MIN TYP 25.4 REF 4 20 6 4.2 2.55 -B- 1 PIN SEE DETAIL A 0.1 2.5 3.3 C D X 29 SPCS= 23.2 0.8 1.5 NO BURR B TYP 2.1 0.8 4 MIN 3.2 1.8 4.8 0.2 #0.1 -D- 0.6 1 #0.1 0.15 X 41 SPCS= 32.8 4 #0.1 DETAIL A SCALE 8:1 (SDRAM 3.3V) 143 PIN -C- 0.1 B D 0.1 B D C C 4.5 67.6 0.1 C B D #0.1 0.1 A TYP 2 PLCS NO COMPONENT AREA, LEVER MOVING AREA, ACCEPT CIRCUIT PATTERN P.C. BOARD OUTER LINE 1.05 20 0 $' TYP 3.8 REF 4 #0.1 1.41 TYP REF 4.6 3.7 65.1 0.4 A TYP 2 PLCS 63.6 4.8 0.8 2 X 29 SPCS= 23.2 4.6 0.8 X 41 SPCS= 32.8 2.5 B 2 PIN 2.1 MECHANICAL KEY 0.8 144 PIN 1.4 PITCH X 29 SPCS= 23.2 2 PIN 0.8 PITCH X 41 SPCS= 32.8 144 PIN 62 PIN 60 PIN 26 #0.1 TYP 3.1 16.1 1.6 B 5.1 #0.05 -A- 0.8 1 PIN FULL R 3.3 REF 0.8 143 PIN 61 PIN 59 PIN CONNECTOR OUTER LINE TYP 0.5 4.6 PITCH X 29 SPCS= 23.2 #0.03 0.06 A TYP 144 PLCS TYP 0.06 0.8 2 #0.05 A 1.1 PITCH X 41 SPCS= 32.8 0.1 1 A 33.8 THIS DRAWING IS A CONTROLLED DOCUMEN IT IS SUBJECT TO CHANGE AND THE CONT ORGANIZATION SHOULD BE CONTACTED FOR RECOMMENDED P.C. BOARD PATTERN LAYOUT (CONNECTOR MOUNTING SIDE) DIMENSIONS: mm T FOR AMP INCORPORATED. ROLLING ENGINEERING THE LATEST REVISION. MATERIAL 6-23-97 CHK 1-21-02 ALAN ANG SF LEONG 108-1739 APPLICATION SPEC #- SEE TABLE A TYCO ELECTRONICS SINGAPORE NAME APVD PRODUCT SPEC #0.2 ##0.2 #0.2 #- FINISH 1 DWN W.SORAH TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES AMP 4805 REV 27JUN96 A 7.5 #0.1 TYP BOTH ENDS 63 2 #0.1 #0.05 114-1114 WEIGHT CUSTOMER DRAWING S.O. DIMM SOCKET ASSY, 0.8mm, 3.3V, 144 POSITION, HIGH PROFILE FOR SDRAM TYPE MODULE SIZE CAGE CODE A1 00779 RESTRICTED TO DRAWING NO 390112 SCALE 4:1 SHEET 2 OF 2 REV R1 R