4 3 2 1 REVISIONS 28.00±0.20 REV. 14.80 A BY DESCRIPTION DATE APPROVED RW INITIAL RELEASE ECO-065326 5/9/2011 HF 13.20 6.70 D D 6.50 6 1.00±0.20 (PITCH) PIN A1 3 A 1.00±0.20 (PITCH) 4- 3.41±0.02 Contact Lead 0.12t x 0.20w 4 2.00±0.05 3.59±0.02 7.00 15.00±0.07 16.00±0.07 3 16.50±0.20 (13.50) (Cover Full Stroke) 8 (9.20) (IC Seating Plane) 7 3.00±0.20 2.80±0.30 2 5 C 16.00±0.07 4 9 B THIS SOCKET IS THE TYPE WITH ADAPTER. THE ADAPTER CAN BE EXCHANGED TO ANOTHER ADAPTER CONFORMABLE TO IC PACKAGE OF DIFFERENT OUTLINE SIZE (NEW ADAPTER MAY BE NEEDED AND THE MAXIMUM IC PACKAGE OUTLINE SIZE AVAILABLE TO THIS SOCKET IS 11.0 X 15.0mm). THE ADAPTER OF THIS PART NUMBER IS AVAILABLE FOR THE IC TYPICAL DIMENSIONS ON THIS DRAWING. PLEASE CONTACT SENSATA ENGINEERING SECTION ABOUT THE AVAILABILITY OF THIS SOCKET TO YOUR IC PACKAGE. 3.41±0.20 7.00 24.60±0.20 12.80 1 3.59±0.20 C 11.20 5.50 5.70 10 ITEM PART DESCRIPTION MATERIAL NO. 1 ADAPTER PEI 2 BASE PEI 3 COVER PEI 4 LATCH PEI 5 LEAD GUIDE PES 6 SLIDER PEI 7 STOPPER PEI 8 CONTACT BeCu SPRING SUS 9 10 SPRING SUS FOR REFERENCE ONLY, CHECK LATEST REVISION BEFORE USE. PARTS MADE TO THIS PRINT MUST CONFORM TO E9898 REV. E DRAWN R. WILLIAMS DATE 5/9/2011 ENGINEER H. FURUKAWA DATE 5/9/2011 APPROVED H. FURUKAWA DATE 5/9/2011 NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN mm TOLERANCES DECIMALS ANGLES X.X X.XX X.XXX 0.1 0.05 0.01 X.X 1 APPROVED THIRD ANGLE PROJECTION DATE DO NOT SCALE DRAWING 2 QTY. NOTE 1 1 1 2 1 1 1 64 4 4 BEIGE BLACK BLACK BLACK BLACK BLACK BLACK GOLD PLATED FOR COVER FOR SLIDER & LATCH Sensata 529 PLEASANT STREET P.O. BOX 2964 ATTLEBORO, MA 02703 Technologies TITLE SALES DRAWING 64 PIN - 1.0mm PITCH - (11X13mm) BURN-IN TEST SOCKET DWG NO. SIZE B B REV. CBG064-087G-3 SCALE A SOLIDWORKS SHEET 1 OF 2 1 A 4 3 2 1 A1 INDEX MARK D D 3.00 7.00±0.05 B KEEP OUT ZONE C 8.00 4.50 3.41±0.03 2.80 16.00±0.05 PIN A1 8.00 1.00±0.05 C 3.59±0.03 0.05 C 4 - 2.10±0.05 HOLE FOR REGISTRATION PINS B 7.00±0.05 11.00±0.10 8.00 0.50±0.05 2.00 8.00 0.30 13.00±0.10 1.00 +0.10 0.00 HOLE FOR SOLDERING 64 - 1.20±0.10 0.50 16.00±0.05 C 0.50 64 - 0.60±0.05 0.10 C A B 1.00 A B 0.05 C 1.00±0.05 3.41±0.03 3.59±0.03 7.00 APPLICABLE IC DIMENSIONS (BOTTOM VIEW BUMP SIDE UP) 8.00 15.00±0.05 PCB HOLE PATTERN (TOP VIEW) Sensata A 529 PLEASANT STREET P.O. BOX 2964 ATTLEBORO, MA 02703 A Technologies SIZE 4 3 2 DWG NO. REV. B CBG064-087G-3 SCALE SOLIDWORKS 1 A SHEET 2 OF 2