UG06A - UG06D CREAT BY ART 0.6AMP. Glass Passivated Ultra Fast Rectifiers TS-1 Features Plastic package has Underwrites Laboratories Flammability Classification 94V-0 ldeally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ulterafast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High temperature soldering guaranteed: 260oC/10 seconds/.375",(9.5mm) lead lengths at 5lbs.,(2.3kg) tension Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Cases: Void free molded plastic body over glass passivated chip iunction Terminals: Pure tin plated leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode Mounting position: Any Weight: 0.181 grams Ordering Information (example) Part No. Package Packing INNER TAPE Packing code Green Compound Packing code UG06A TS-1 3K / AMMO box 26mm P0 P0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol UG06A UG06B UG06C UG06D Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 V Maximum RMS Voltage VRMS 25 70 105 140 V Maximum DC Blocking Voltage VDC 50 100 150 200 V Maximum Average Forward Rectified Current IF(AV) 0.6 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 40 A VF 0.95 V 5 uA 150 uA Maximum Instantaneous Forward Voltage (Note 1) @ 0.6A Maximum DC Reverse Current at Rated DC Blocking Voltage @ TA=25 ℃ @ TA=125 ℃ IR Maximum Reverse Recovery Time (Note 2) Trr 15 nS Typical Junction Capacitance (Note 3) Cj 9 pF RθJA RθJL 97 28 TJ - 55 to + 150 O C - 55 to + 150 O C Typical Thermal Resistance Operating Temperature Range TJ Storage Temperature Range TSTG TSTG O Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1MHz and Applied Reverse Voltage of 4.0 Volts D.C. Version:D13 C/W RATINGS AND CHARACTERISTIC CURVES (UG06A THRU UG06D) FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.9 100 RESISTIVE OR INDUCTIVE LOAD 0.75 PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD RECTIFIED CURRENT (A) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 0.6 0.45 0.3 0.15 0 0 25 50 75 100 125 150 8.3ms Single Half Sin Wave JEDEC Method 10 1 1 175 10 FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TA=100℃ FIG. 4- TYPICAL REVERSE CHARACTERISTICS 1000 10 TA=50℃ 1 Pulse Width=300us 1% Duty Cycle 0.1 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE (V) 1.4 1.6 INSTANTANEOUS REVERSE CURRENT (uA) INSTANTANEOUS FORWARD CURRENT (A) 100 100 10 TA=100℃ TA=50℃ 1 0.1 0.01 FIG. 5- TYPICAL JUNCTION CAPACITANCE 0 100 JUNCTION CAPACITANCE (pF) 100 NUMBER OF CYCLES AT 60 Hz LEAD TEMPERATURE (oC) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) TA=25oC f=1.0MHz Vsig=50mVp-p 10 1 0.1 1 10 100 REVERSE VOLTAGE (V) Version:D13 Ordering information Part No. UG06x (Note) Package Packing INNER TAPE Packing code Green Compound Packing code TS-1 3K / AMMO box 26mm A1 A1G TS-1 3K / AMMO box 52mm A0 A0G TS-1 5K / 13" Reel 52mm R0 R0G TS-1 1K / Bulk packing B0 B0G Note: "x" is Device Code from "A" thru "D". AXIAL LEAD TAPING SPECIFICATIONS Outline TS-1 TS-1 A ±0.5 5 5 B ±1.5 26 52.4 Z MAX 1.2 1.2 T ±0.4 6 6 E ∣L1-L2∣ MAX MAX 0.8 1 0.8 1 D 330 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 3 0.6 3.0 1 D1 ±0.3 85.7 85.7 D0 ±0.4 16.6 16.6 Unit (mm) W ±1.0 76 76 Dimensions DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YW = Date Code Unit(mm) Unit(inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.53 0.64 0.021 0.025 C 25.40 - 1.000 - D 3.00 3.30 0.118 0.130 E 25.40 - 1.000 -