ETC HEDL-5560#B13

Encoder Line Drivers
Technical Data
HEDL-550x/554x
HEDL-560x/564x
HEDL-9000/9100
HEDL-9040/9140
Features
• Available on Both Encoder
Modules (HEDS-9000
Series) and Encoder Kit
Housing (HEDS-5500 Series)
• Complementary Outputs
• Industry Standard Line
Driver IC
• Single 5 V Supply
• Onboard Bypass Capacitor
• 70 °C and 100 °C Versions
Available
Description
Line Drivers are available for the
HEDS-55xx/56xx series and the
HEDS-9000/9100/9200/9040/
9140 series encoders. The line
driver offers enhanced performance when the encoder is used in
noisy environments, or when it is
required to drive long distances.
The 70°C version utilizes an
industry standard line driver IC
(26LS31) which provides complementary outputs for each encoder
channel. The 100°C version utilizes
an industry standard line driver IC,
26C31, which provides complementary outputs for each encoder
channel. Thus, the output of the
line driver encoder is A, A, B, B
and I/I for three channel versions.
Suggested line receivers are
26LS32 and 26LS33.
For additional information,
please refer to:
HEDS-5500/5540/5600/5640
data sheet,
HEDS-90x0/91x0/92x0 data
sheets,
HEDS-9000 series extended
resolution data sheet, and
26LS31 data sheet.
Note: Agilent Technologies
encoders are not recommended
for use in safety critical
applications. Eg. ABS braking
systems, power steering, life
support systems and critical care
medical equipment. Please
contact sales representative if
more clarification is needed.
Device Characteristics
Parameter
Termination
Electrical Outputs
Line Driver Components
Operating Temperature
Range
Storage Temperature
Characteristic
10 conductor ribbon cable with
10 position IDC Berg connector
Complementary outputs: A, A, B, B, I, I
26LS31 line driver IC, decoupling
capacitor on PC board.
0°C to 70°C
0°C to 100°C
-40°C to 70°C
-40°C to 100°C
Notes
See pinout
I and I available only on
three channel encoders
70°C Series
100°C Series
70°C Series
100°C Series
ESD WARNING: NORMAL HANDLING PRECAUTIONS SHOULD BE TAKEN TO AVOID
STATIC DISCHARGE.
2
Line Driver Package Dimensions
For Detailed Dimensions on encoder packages, please refer to the respective data sheets.
41.1
(1.62)
26.2
(1.03)
15.0 R
(0.59 R)
PIN 1 ID
HEDL-55XX ###
30.0
(1.18)
YYWW A
SINGAPORE
483 ± 13
(19.0 ± 0.5)
18.3
(0.72)
HEDL-550X/554X/560X/564X
HEDL-556X/557X
NOTE: DIMENSIONS IN MILLIMETERS (INCHES)
19.0 ± 0.5
0.160 MAX.
0.405
MAX. 0.450
0.807 MAX.
HEDL-9000/9100/9200/9040/9140
HEDL-9060/9160/9260/9061/9161
3
Waveforms
A
AMPLITUDE
A
Block Diagram
Pinouts
HEDS-9000/9100/9200
-9040/9140
-556X/554X
-560X/564X
10-PIN CONNECTOR
26LS31
B
A
A
B
A
B
B
I
B
I
I
I
I
ROTATION
VCC
NO.
COLOR
1
2
3
4
5
6
7
8
9
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GREY
WHITE
PARAMETER
NC
VCC (+ 5 V)
GND
NC
A
A
B
B
I (INDEX)
VCC
G
GND
GND
1
9
2
10
10 POSITION IDC CONNECTOR
CENTER POLARIZED.
Note: I/I only available on three channel encoders.
Line Driver Base Parts Available:
100 °C Line Driver
Base Part
Channels
Refer to the following encoder data sheet for
additional information and option codes
(XXX = resolution and/or shaft size)
HEDL-5500#XXX
A, B
HEDS-5500#XXX
HEDL-5505#XXX
A, B
HEDS-5505#XXX
HEDL-5540#XXX
A, B, I
HEDS-5540#XXX
HEDL-5600#XXX
A, B
HEDS-5600#XXX
HEDL-5605#XXX
A, B
HEDS-5605#XXX
HEDL-5640#XXX
A, B, I
HEDS-5640#XXX
HEDL-5645#XXX
A, B, I
HEDS-5645#XXX
HEDL-9000#XXX
A, B
HEDS-9000#XXX
HEDL-9040#XXX
A, B, I
HEDS-9040#XXX
HEDL-9100#XXX
A, B
HEDS-9100#XXX
HEDL-9140#XXX
A, B, I
HEDS-9140#XXX
Ordering Information:
For option code selection, refer to
the data sheet for the
corresponding “HEDS” part
number (see right column).
01
HEDL-5500#
HEDL-5505#
HEDL-5540#
A
E
G
H
I
02
04 05
*
11
12 13
14
*
*
*
*
*
*
A
I
A
C
E
G
I
06
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
HEDL-5560#
B
*
HEDL-5561#
J
*
HEDL-5600#
A
H
*
*
HEDL-5605#
A
C
*
HEDL-5640#
A
*
HEDL-5645#
A
G
*
*
*
*
*
*
*
HEDL-9000#
U00
HEDL-9040#
B00
HEDL-9100#
A00
HEDL-9140#
A00
100
*
*
*
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(408) 654-8675
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 271 2451
India, Australia, New Zealand: (+65) 271 2394
Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only)
Korea: (+65) 271 2194
Malaysia, Singapore: (+65) 271 2054
Taiwan: (+65) 271 2654
Data subject to change.
Copyright © 2002 Agilent Technologies, Inc.
Obsoletes 5988-2580EN
March 11, 2002
5988-5893EN