ADMOS AMSOP-07D

Advanced
Monolithic
Systems
AMSOP-07
LOW OFFSET VOLTAGE OPERATIONAL AMPLIFIER
FEATURES
APPLICATIONS
• Low VOS………………………………………. 75µ
µ V Max
• Low VOS Drift.……………………………. 1.3µ
µ V/°°C Max
• Ultra Stable with Time……………… 1.5µ
µ V/Month Max
• Low Noise …………………………………..0.6µ
µ VP-P Max
• Wide Input Voltage Range ……………………..… ± 14V
• Wide Supply Voltage Range ……………… ± 3V to ± 18V
• High-Gain Instrumentation
• Precision Data Acquisition
• Precision Integrators
• Precision Threshold Detectors
• Biomedical Amplifiers
GENERAL DESCRIPTION
The AMSOP-07 is a precision operational amplifier with a very low input offset voltage. This device features a wide input
voltage range of ±13V minimum, low input bias current, high impedance, high CMRR, excellent stability of offsets and gain
over time and temperature. Excellent linearity can be maintained even at high closed-loop gains.
Low cost, low noise, low offsets and high open-loop gain make the AMSOP-07 an excellent choice particularly for high-gain
instrumentation applications. Other applications include precision data acquisition, precision integrators, threshold detectors
and medical instrumentation.
The AMSOP-07 is operational in the full industrial temperature range of -40°C to 85°C and is available in the 8 lead SOIC
and plastic dip (PDIP) packages.
ORDERING INFORMATION:
TOL.
PACKAGE TYPE
8 LEAD SOIC
±75µV AMSOP-07ES
±150µV AMSOP-07CS
±150µV AMSOP-07DS
8 LEAD PDIP
AMSOP-07EP
AMSOP-07CP
AMSOP-07DP
OPERATING
TEMPERATURE RANGE
-40 to 85° C
-40 to 85° C
-40 to 85° C
PIN CONNECTIONS
8 Lead SOIC/ 8Lead PDIP
VOS TRIM
1
8 VOS TRIM
-IN
2
7 V+
+IN
3
6 OUT
V- 4
5 N/C
Top View
Advanced Monolithic Systems, Inc.
6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140
AMSOP-07
ABSOLUTE MAXIMUM RATINGS (Note1)
Supply Voltage
Differential Input Voltage
Input Voltage
Output Short Circuit Duration
Operating Temperature Range
±22V
±30V
±22V
Indefinite
-40°C to 85°C
Storage temperature
Junction Temperature
Soldering information (60 sec)
Thermal Resistance
8 L SOIC
8 L PDIP
-65°C to +125°C
+150°C
300°C
158°C/W
103°C/W
ELECTRICAL CHARACTERISTICS
Electrical Characteristics at VIN =±15V and TA = +25°C unless otherwise specified.
Parameter
Conditions
AMSOP-07E
AMSOP-07 C
Min
Typ
Max
Min
Typ
Max
AMSOP-07 D
Min
Typ
Max
Units
Input Offset Voltage
(Note 2)
30
75
60
150
60
150
µV
Long Term VOS
Stability
(Note 3)
0.3
1.5
0.4
2.0
0.5
3.0
µV/Mo
0.5
3.8
0.8
6.0
0.8
6.0
nA
± 1.2
± 4.0
± 1.8
± 7.0
± 2.0
± 12
nA
Input Offset Current
Input Bias Current
Input Noise Voltage
0.1Hz to 10Hz
0.35
0.6
0.38
0.65
0.38
0.65
µVP-P
Input Noise Voltage
Density
fO = 10Hz
fO = 100Hz (Note 4)
fO = 1000Hz
10.3
10.0
9.6
18.0
13.0
11.0
10.5
10.2
9.8
20.0
13.5
11.5
10.5
10.3
9.8
20.0
13.5
11.5
nV/√Hz
Input Noise Current
0.1Hz to 10Hz
14
30
15
35
15
35
pAP-P
Input Noise
CurrentDensity
fO = 10Hz
fO = 100Hz (Note 4)
fO = 1000Hz
0.32
0.14
0.12
0.80
0.23
0.17
0.35
0.15
0.13
0.90
0.27
0.18
0.35
0.15
0.13
0.90
0.27
0.18
pA/√Hz
Input Resistance
Differential-Mode
(Note 5)
15
Input Resistance
Common-Mode
50
8
160
Input Voltage Range
Common-Mode
Rejection Ratio
VCM = ± 13
Power Supply
Rejection Ratio
VS = ± 13 to ± 18
Large-Signal
Voltage Gain
RL≥2kΩ, VO =± 10V
RL≥500Ω, VO =± 0.5V,
VS =± 0.5V (Note 5)
Output Voltage
Swing
RL ≥10kΩ
RL ≥2kΩ
RL ≥1kΩ
Slew Rate
33
7
120
MΩ
120
GΩ
± 13
± 14
± 13
± 14
± 13
± 14
V
106
123
100
120
94
110
dB
5
20
7
32
7
200
150
500
400
120
100
400
400
120
± 12.5
± 12.0
± 10.5
± 13.0
± 12.8
± 12.0
± 12.0
± 11.5
± 13.0
± 12.8
± 12.0
± 12.0
RL ≥2kΩ (Note 4)
0.1
0.3
0.1
Closed-Loop
Bandwidth
AVCL =+1
(Note 6)
0.4
0.6
0.4
Open-Loop Output
Resistance
VO = 0, IO= 0
60
Power Consumption
VS =± 15V, No Load
VS =± 3V, No Load
75
4
Offset Adjustment
Range
RP =20kΩ
±4
Advanced Monolithic Systems, Inc.
31
µV/V
400
400
V/mV
± 11.5
± 13.0
± 12.8
± 12.0
V
0.3
0.1
0.3
V/µs
0.6
0.4
0.6
MHz
60
Ω
60
120
6
32
80
4
±4
150
8
80
4
±4
150
8
mW
mV
6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140
AMSOP-07
ELECTRICAL CHARACTERISTICS
Electrical Characteristics at VIN= ±15, at -40°C ≤ TA ≤ +85°C unless otherwise specified.
Parameter
Conditions
AMSOP-07E
AMSOP-07 C
Min
Typ
Max
Min
Typ
Max
AMSOP-07 D
Min
Typ
Max
Units
Input Offset Voltage
(Note 2)
45
130
85
250
85
250
µV
Average Input Offset
Voltage Drift
(Note 5)
Without External Trim
0.3
1.3
0.5
1.8
0.7
2.5
µV/°C
With External Trim
RP =2kΩ
0.3
1.3
0.4
1.6
0.7
2.5
µV/°C
0.9
5.3
1.6
8.0
1.6
8.0
nA
8
35
12
50
12
50
pA/°C
± 1.5
± 5.5
± 2.2
± 9.0
± 3.0
± 14
nA
13
35
18
50
18
50
pA/°C
Input Offset Current
Average Input Offset
Current Drift
(Note 4)
Input Bias Current
Average Input Bias
Current Drift
(Note 4)
Input Voltage Range
Common-Mode
Rejection Ratio
VCM = ± 13
Power Supply
Rejection Ratio
VS = ± 13 to ± 18
Large-Signal
Voltage Gain
RL≥2kΩ, VO =± 10V
Output Voltage
Swing
RL ≥2kΩ
± 13
± 13.5
± 13
± 13.5
± 13
± 13.5
V
103
123
97
120
94
106
dB
7
32
10
51
10
180
450
100
400
100
400
± 12.0
± 13.0
± 12.0
± 13.0
± 12.0
± 13.0
µV/V
51
V/mV
V
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The
guaranteed specifications apply only for the test conditions listed.
Note 2: Input Offset Voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power.
Note 3: Long-Term Input Offset Voltage Stability refers to the averaged trend line of VOS vs. Time over extended periods after the first 30 days of operation.
Excluding the initial hour of operation, changes in VOS during the first 30 operating days are typically 2.5µV. Parameter is sample tested.
Note 4: Sample tested
Note 5: Guaranteed by design.
Note 6: Guaranteed but not tested.
TYPICAL PERFORMANCE CHARACTERISTICS
25
VS = ±15V
800
600
400
200
-50
0
50
TEMPERATURE (° C)
Advanced Monolithic Systems, Inc.
100
20
30
TA = 25° C
VS = ±15V
15
OP-07C
10
5
0
OP-07E
0
1
2
3
4
5
TIME AFTER POWER SUPPLY TURN-ON (minutes)
NONINVERTING INPUT BIAS
CURRENT (mA)
ABSOLUTE CHANGE IN INPUT
OFFSET VOLTAGE (µV)
OPEN-LOOP GAIN (V/mV)
1000
0
Input Bias Current vs
Differrential Input Voltage
Warm-UpDrift
AT | VDIFF | ≤ 1.0V, | IB | ≤ 7nA (OP-07C)
-30
20
-20
10
-10
0
0
-10
-20
10
VS = ±15V
TA = 25° C
20
-30
30
-30 -20 -10
0
10
20
30
DIFFERENTIAL INPUT VALUE (V)
6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140
INVERTING INPUT BIAS
Open-Loop Gain vs Temperature
AMSOP-07
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
2.5
3
2
OP-07C
OP-07E
1
0
-50
1000
2.0
1.5
1.0
OP-07C
0.5
OP-07E
0
0
50
100
TEMPERATURE (° C)
-50
PEAK-TO-PEAK AMPLITUEDE (V)
OPEN-LOOP GAIN (dB)
VS = ±15V
TA = 25° C
80
40
0
0
1
10 100 1k 10k 100k 1M 10M
FREQUENCY (Hz)
600
400
200
0
0
50
100
TEMPERATURE (° C)
28
VS = ±15V
TA = 25° C
24
20
16
12
8
4
0
1k
0
±5
±10
±15
±20
POWER SUPPLY VOLTAGE (V)
Maximum Output Voltage vs
Load Resistance
20
15
VS = ±15V
TA = 25° C
VIN = ±10mV
POSITIVE SWING
NEGATIVE SWING
10
1M
10k
100k
FREQUENCY (Hz)
Output Short-Circuit Current vs
Time
5
0
100
1k
10k
LOAD RESISTANCE TO GROUND (Ω)
Untrimmed Offset Voltage vs
Temperature
35
85
1. VIN (PIN 3) = -10mV, VO = +15V
2. VIN (PIN 3) = +10mV, VO = -15V
30
1
2
25
2
1
20
VS = ±15V
TA = 25° C
15
ABSOLUTE VALUE OF OFFSET
VOLTAGE (µV)
OUTPUT SHORT-CIRCUIT
CURRENT (mA)
800
Maximum Output Swing vs
Frequency
Open-Loop Frequency Response
120
TA = 25° C
VS = ±15V
OPEN-LOOP GAIN (V/mV)
INPUT OFFSET CURRENT (nA)
INPUT BIAS CURRENT (nA)
VS = ±15V
MAXIMUM OUTPUT VOLTAGE (V)
4
-40
Open-Loop Gain vs Power
Supply Voltage
Input Offset Current vs Temperature
Input Bias Current vs Temperature
0
1
2
3
4
TIME FROM OUTPUT BEING SHORTED (minutes)
Advanced Monolithic Systems, Inc.
75
VS = ±15V
RS = 100Ω
OP-07C
50
OP-07E
25
0
-50
0
50
TEMPERATURE (° C)
100
6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140
AMSOP-07
TEST CIRCUITS
TYPICAL OFFSET VOLTAGE TEST CIRCUIT
TYPICAL LOW-FREQUENCY NOISE TEST CIRCUIT
200kΩ
2.5MΩ
V+
50kΩ
100kΩ
OP-07
+
VO
2
100kΩ
3
7
+
3.3kΩ
6
OP-07
OUTPUT
4
VOS = VO/4000
4.7µF
V-
(≈10Hz FILTER)
INPUT REFERRED NOISE = VO/25,000 =(5mV/cm)/25,000 = 200nV/cm
OPTIONAL OFFSET NULLING CIRCUIT
20kΩ
-
2
INPUT
+
3
V+
1
8
-
7
6
OP-07
+
OUTPUT
4
V-
TYPICAL APPLICATIONS
Adjustment Free Precision Summing Amplifier
Precision Absolute Value Circuit
R4
10kΩ
R1
10kΩ
E1
E2
E3
R2
10kΩ
R3
10kΩ
R3
10kΩ
R4
10kΩ
R5
10kΩ
V+
V+
2
3
7
-
6
OP-07
+
4
R5
2.5kΩ
V-
Advanced Monolithic Systems, Inc.
EIN
EO
±10V
R1
10kΩ
FD333
D1
2
7
OP-07
A1
3
+
4
R2
10kΩ
V-
V+
2
6
FD333
D1
7
OP-07
A2
3
+
4
6
EO
0 TO +10V
V-
VA
6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140
AMSOP07
PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted.
8 LEAD SOIC PLASTIC PACKAGE (S)
0.189-0.197*
(4.801-5.004)
8
7
6
5
0.228-0.244
(5.791-6.197)
0.150-0.157**
(3.810-3.988)
1
2
3
4
0.010-0.020
x 45°
(0.254-0.508)
0.053-0.069
(1.346-1.752)
0.004-0.010
(0.101-0.254)
0.014-0.019
(0.355-0.483)
0.008-0.010
(0.203-0.254)
0.050
(1.270)
TYP
0°-8° TYP
0.016-0.050
(0.406-1.270)
S (SO-8 ) AMS DRW# 042293
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
8 LEAD PLASTIC DIP PACKAGE (P)
0.400*
(10.160)
MAX
8
7
6
5
1
2
3
4
0.255±0.015*
(6.477±0.381)
0.045-0.065
(1.143-1.651)
0.300-0.325
(7.620-8.255)
0.130±0.005
(3.302±0.127)
0.065
(1.651)
TYP
0.005
(0.127)
MIN
0.100±0.010
(2.540±0.254)
0.125
(3.175)
MIN
0.009-0.015
(0.229-0.381)
0.015
(0.380)
MIN
0.018±0.003
(0.457±0.076)
0.325 +0.025
-0.015
(8.255 +0.635
-0.381
)
P (8L PDIP ) AMS DRW# 042294
*DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTUSIONS.
MOLD FLASH OR PROTUSIONS SHALL NOT EXCEED 0.010" (0.254mm)
Advanced Monolithic Systems, Inc.
6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140