TI TLE2142AID

TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
•
•
•
•
•
•
•
•
Low Noise
10 Hz . . . 15 nV/√Hz
1 kHz . . . 10.5 nV/√Hz
10 000-pF Load Capability
20-mA Min Short-Circuit Output Current
27-V/µs Min Slew Rate
High Gain-Bandwidth Product . . . 5.9 MHz
Low VIO . . . 750 µV Max at 25°C
•
•
Single or Split Supply
Fast Settling Time
340 ns to 0.1%
400 ns to 0.01%
Saturation Recovery . . . 150 ns
Large Output Swing
VCC – + 0.1 V to VCC + – 1 V
SLEW RATE
vs
LOAD CAPACITANCE
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
Vn
Vn – Equivalent Input Noise Voltage – nv/Hz
nV/ Hz
50
SR – Slew Rate – V/xs
V/µ s
40
SR +
30
20
SR –
10
VCC± = ± 15 V
AVD = – 1
TA= 25°C
0
0.01
250
VCC ± = ± 15 V
RS = 20 Ω
200
TA = – 55°C
150
TA = 125°C
100
TA = 25°C
50
0
0.1
1
10
1
10
CL – Load Capacitance – nF
10 k
1k
100
f – Frequency – Hz
description
The TLE2142 and TLE2142A devices are high-performance internally-compensated operational amplifiers built
using Texas Instruments complementary bipolar Excalibur process. The TLE2142A is a tighter offset voltage
grade of the TLE2142. Both are pin-compatible upgrades to standard industry products.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
750 µV
SMALL
OUTLINE
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(JG)
PLASTIC
DIP
(P)
0°C to 70°C
TLE2142ACD
—
—
TLE2142ACP
1200 µV
TLE2142CD
—
—
TLE2142CP
– 40°C to 105°C
750 µV
TLE2142AID
—
—
TLC2142AIP
1200 µV
TLE2142ID
—
—
TLC2142IP
TLE2142AMD
TLE2142AMFK
TLE2142AMJG
TLC2142AMP
TLE2142MD
TLE2142MFK
TLE2142MJG
TLC2142MP
– 55°C to 125°C
750 µV
1200 µV
CHIP
FORM
(Y)
—
TLE2142Y
—
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLC2142ACDR).
Copyright  1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–1
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
description (continued)
The design incorporates a patent-pending input stage that simultaneously achieves low audio-band noise of
10.5 nV/√Hz, with a 6-Hz 1/f corner and symmetrical 40-V/µs slew rate typically with loads up to 800 pF. The
resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling
time of 340 ns to 0.1% of a 10-V step with a 2-kΩ/100-pF load is useful in fast actuator/positioning drivers. Under
similar test conditions, settling time to 0.01% is 400 ns.
The devices are stable with capacitive loads up to 10 nF, although the 6-MHz bandwidth decreases to 1.8 MHz
at this high loading level. As such, the TLE2142 and TLE2142A are useful for low-droop sample-and-holds and
direct buffering of long cables, including 4-mA to 20-mA current loops.
The special design also exhibits an improved insensitivity to inherit integrated circuit component mismatches
as is evidenced by a 750-µV maximum offset voltage and 1.7-µV/°C typical drift. Minimum common-mode
rejection ratio and supply voltage rejection ratio are 85 dB and 90 dB, respectively.
Device performance is relatively independent of supply voltage over the ± 2-V to ± 22-V range. Inputs can
operate between VCC – – 0.3 to VCC + – 1.8 V without inducing phase reversal, although excessive input current
may flow out of each input exceeding the lower common-mode input range. The all-npn output stage provides
a nearly rail-to-rail output swing of VCC – + 0.1 to VCC + – 1 V under light current-loading conditions. The device
can sustain shorts to either supply since output current is internally limited, but care must be taken to ensure
that maximum package power dissipation is not exceeded.
Both versions can also be used as comparators. Differential inputs of VCC ± can be maintained without damage
to the device. Open-loop propagation delay with TTL supply levels is typically 200 ns. This gives a good
indication as to output stage saturation recovery when the device is driven beyond the limits of recommended
output swing.
Both the TLE2142 and TLE2142A are available in a wide variety of packages, including both the
industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix
devices are characterized for operation from 0°C to 70°C, I-suffix devices from – 40°C to 105°C, and M-suffix
devices over the full military temperature range of – 55°C to 125°C.
FK PACKAGE
(TOP VIEW)
1
8
2
7
3
6
4
5
VCC +
2OUT
2IN –
2IN +
NC
1IN –
NC
1IN +
NC
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
VCC –
NC
2IN +
NC
1OUT
1IN –
1IN +
VCC –
NC
1OUT
NC
VCC +
NC
D, JG, OR P PACKAGE
(TOP VIEW)
NC – No internal connection
5–2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
NC
2OUT
NC
2IN –
NC
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
symbol (each amplifier)
+
IN +
OUT
–
IN –
TLE2142Y chip information
This chip, when properly assembled, displays characteristics similar to the TLE2142. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(2)
(8)
(1)
(7)
IN +
IN –
OUT
(3)
(2)
VCC+
(8)
+
(1)
OUT
–
+
(7)
–
(5)
(6)
IN +
IN –
(4)
VCC –
90
CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 4 × 4 MINIMUM
(3)
(6)
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(5)
(4)
PIN 4 IS INTERNALLY CONNECTED
TO BACKSIDE OF CHIP.
80
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–3
5–4
IN +
IN –
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Q2
Q4
D1
Q7
Q6
R3
Transistors
Epi-FET
Diodes
Resistors
Capacitors
65
1
14
43
8
R5
Q12
Q11
R6
Q10
Q9
C1
Q5 Q8
R4
COMPONENT COUNT
(total device)
Q1
R2
Q3
R1
Q14
D2
R9
Q17
R10
Q16
Q15
R8
R7
Q13
equivalent schematic (per amplifier)
R11
C2
VCC
Q18
Q19
VCC +
R12
Q20
C3
R13
D4
Q21
C4
D3
Q22
R14
Q24
D5
Q25
R16
R15
Q23
Q29
D7
D6
Q28
R17
Q27
Q26
R18
D8
R20
Q33
Q32
Q31
Q30
R19
R22
Q35
Q36
R23
Q34
R21
Q37
OUT
R24
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION
DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
Supply voltage, VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 22 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC – – 0.3 V
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA
Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 105°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC + and VCC – .
2. Differential voltages are at IN+ with respect to IN –. Excessive current will flow if input is brought below VCC – – 0.3 V.
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25
25°C
C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70
70°C
C
POWER RATING
TA = 105
105°C
C
POWER RATING
TA = 125
125°C
C
POWER RATING
D
725 mV
5.8 mW/°C
464 mW
261 mW
145 mW
FK
1375 mV
11.0 mW/°C
880 mW
495 mW
275 mW
JG
1050 mV
8.4 mW/°C
672 mW
378 mW
210 mW
P
1000 mV
8.0 mW/°C
640 mW
360 mW
200 mW
recommended operating conditions
Supply voltage, VCC ±
Common-mode input voltage
voltage, VIC
VCC = 5 V
VCC ± = ± 15 V
Operating free-air temperature, TA
POST OFFICE BOX 655303
C SUFFIX
I SUFFIX
M SUFFIX
MIN
MAX
MIN
MAX
MIN
MAX
±2
± 22
±2
± 22
±2
± 22
0
2.9
0
2.7
0
2.7
– 15
12.9
– 15
12.7
– 15
12.7
0
70
– 40
105
– 55
125
• DALLAS, TEXAS 75265
UNIT
V
V
°C
5–5
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common mode
C
Common-mode
d input
i
voltage
g range
g
Hi h l
High-level
l output voltage
l
25°C
VO = 2.5
2 5 V,
V
VIC = 2.5 V
RS = 50 Ω
Ω,
MAX
220
1900
8
– 0.8
Full range
25°C
0
to
3
F ll range
Full
g
0
to
2.9
25°C
3.9
Full range
3.8
25°C
3.8
Full range
3.7
25°C
3.4
Full range
3.4
1500
1800
100
8
– 0.8
4.1
3.9
– 0.3
to
3.2
3.8
4
3.7
3.4
1.2
Full range
3.7
125
75
150
225
mV
V
250
1.4
220
125
150
225
1.2
1.5
25
V
3.4
250
50
V
3.7
Full range
25°C
µA
4.1
150
Full range
–2
nA
3.8
4
150
25°C
100
– 2.1
0
to
3
µV
µV/°C
150
–2
UNIT
0
to
2.9
75
25°C
VCC = ± 2.5 V, RL = 2 kΩ,
VO = 1 V to – 1.5 V
200
17
1.7
– 0.3
to
3.2
Full range
IOL = 15 mA
MAX
– 2.1
25°C
IOL = 1
1.5
5 mA
TYP
150
25°C
IOH = – 1.5
1 5 mA
MIN
17
1.7
Full range
IOL = 150 µA
L
Low-level
l
l output voltage
l
Full range
RS = 50 Ω
TLE2142AC
TYP
2200
25°C
IOH = – 15 mA
VOL
TLE2142C
MIN
Full range
IOH = – 150 µA
VOH
TA†
TEST CONDITIONS
1.4
1.5
50
220
V
AVD
Large signal differential
Large-signal
voltage amplification
ri
Input resistance
25°C
70
70
MΩ
ci
Input capacitance
25°C
2.5
2.5
pF
zo
Open-loop output
impedance
f = 1 MHz
25°C
30
30
Ω
CMRR
Common mode
Common-mode
rejection ratio
VIC = VICRmin
min, RS = 50 Ω
kSVR
Supply-voltage
Supply
voltage rejection
ratio (∆VCC ± /∆VIO)
VCC ± = ± 2.5 V to ± 15 V,
RS = 50 Ω
ICC
Supply current
VO = 2.5 V,
VIC = 2.5 V
Full range
25°C
85
Full range
80
25°C
90
Full range
85
25°C
No load,
† Full range is 0°C to 70°C.
5–6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
V/mV
25
118
85
118
dB
80
106
90
106
dB
85
6.6
8.8
9.2
6.6
8.8
9.2
mA
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
operating characteristics, VCC = 5 V, TA = 25°C
PARAMETER
SR +
Positive slew rate
SR –
Negative slew rate
ts
Settling time
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent
Peak-to-peak
input noise voltage
In
Equivalent input noise current
THD + N
Total harmonic distortion plus
noise
B1
Unity-gain bandwidth
BOM
TEST CONDITIONS
TLE2142C
MIN
TYP
TLE2142AC
MAX
MIN
TYP
45
45
42
42
To 0.1%
0.16
0.16
To 0.01%
0.22
0.22
RS = 20 Ω,
f = 10 Hz
15
15
RS = 20 Ω,
f = 1 kHz
10.5
10.5
f = 0.1 Hz to 1 Hz
0.48
0.48
f = 0.1 Hz to 10 Hz
0.51
0.51
f = 10 Hz
1.92
1.92
f = 1 kHz
0.5
0.5
AVD = – 1,
CL = 500 pF
RL = 2 kن,
AVD = – 1,
2.5-V step
MAX
UNIT
V/µs
µs
nV/√Hz
µV
pA/√Hz
VO = 1 V to 3 V,
AVD = 2,
RL = 2 kن,
RL = 2 kن,
f = 10 kHz
0 0052%
0.0052%
0 0052%
0.0052%
CL = 100 pF
5.9
5.9
MHz
Gain-bandwidth product
RL = 2 kن,
f = 100 kHz
CL = 100 pF,
58
5.8
58
5.8
MHz
Maximum output
output-swing
swing
bandwidth
VO(PP) = 2 V,
AVD = 1,
RL = 2 kن,
CL = 100 pF
660
660
kHz
RL = 2 kن,
CL = 100 pF
57°
57°
φm
Phase margin at unity gain
† RL terminates at 2.5 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–7
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common mode
C
Common-mode
d input
i
voltage
g range
g
VOM +
25°C
Ω
RS = 50 Ω,
VIC = 0,
0
VO = 0
Full range
1200
7
275
– 0.7
100
7
– 1.5
– 0.7
– 15
to
13
– 15.3
to
13.2
F ll range
Full
g
– 15
to
12.9
– 15.3
to
13.1
– 15
to
12.9
– 15.3
to
13.1
25°C
13.8
14.1
13.8
14.1
Full range
13.7
25°C
13.7
Full range
13.6
25°C
13.3
Full range
13.2
Full range
– 14.6
25°C
– 14.5
Full range
– 14.4
25°C
– 13.4
Full range
– 13.3
25°C
100
Full range
75
AVD
Large signal differential
Large-signal
voltage amplification
VO = ± 10 V
ri
Input resistance
RL = 2 kΩ
ci
Input capacitance
zo
Open-loop output
impedance
f = 1 MHz
CMRR
Common mode
Common-mode
rejection ratio
VIC = VICRmin,
RS = 50 Ω
25°C
85
Full range
80
kSVR
Supply-voltage
Supply
voltage rejection
ratio (∆VCC ± /∆VIO)
VCC ± = ± 2.5 V to ± 15 V,
RS = 50 Ω
25°C
90
Full range
85
IOS
Short-circuit output current
VO = 0
VID = 1 V
VID = – 1 V
ICC
Supply current
VO = 0
0,
No load
µV
– 1.5
nA
µA
V
13.7
14
13.7
14
V
13.6
13.7
13.3
13.7
13.2
– 14.9
– 14.7
– 14.9
– 14.6
– 14.8
– 14.5
– 14.8
V
– 14.4
– 13.8
– 13.4
– 13.8
– 13.3
450
100
450
V/mV
75
25°C
65
65
MΩ
25°C
2.5
2.5
pF
25°C
30
30
Ω
25°C
108
85
108
106
90
106
– 50
– 25
– 50
31
20
31
† Full range is 0°C to 70°C.
• DALLAS, TEXAS 75265
dB
85
20
Full range
dB
80
– 25
25°C
POST OFFICE BOX 655303
100
– 1.6
– 15.3
to
13.2
UNIT
µV/°C
150
– 15
to
13
– 14.7
750
17
1.7
– 1.6
25°C
MAX
1200
25°C
RS = 50 Ω
IO = 1
1.5
5 mA
TYP
150
Full range
IO = 15 mA
5–8
290
MIN
17
1.7
25°C
IO = 150 µA
M i
Maximum
negative
i peak
k
output voltage swing
MAX
Full range
IO = – 1.5
1 5 mA
TLE2142AC
TYP
1600
25°C
IO = – 15 mA
VOM –
TLE2142C
MIN
Full range
IO = – 150 µA
M i
Maximum
positive
i i peak
k
output voltage swing
TA†
TEST CONDITIONS
6.9
9
9.4
6.9
mA
9
9.4
mA
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
SR +
Positive slew rate
SR –
Negative slew rate
ts
Settling time
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input
Peak-to-peak
noise voltage
In
Equivalent input noise current
THD + N
Total harmonic distortion plus
noise
VO(PP) = 20 V,
AVD = 10,
RL = 2 kΩ,
f = 10 kHz
B1
Unity-gain bandwidth
RL = 2 kΩ,
Gain-bandwidth product
RL = 2 kΩ,
f =100 kHz
BOM
Maximum output
output-swing
swing
bandwidth
φm
Phase margin at unity gain
TLE2142C
MIN
TYP
27
27
TLE2142AC
MAX
MIN
TYP
45
27
45
42
27
42
AVD = – 1,
CL = 500 pF
RL = 2 kΩ,
AVD = – 1,
10-V step
To 0.1%
0.34
0.34
To 0.01%
0.4
0.4
RS = 20 Ω,
f = 10 Hz
15
15
RS = 20 Ω,
f = 1 kHz
10.5
10.5
MAX
UNIT
V/µs
µs
nV/√Hz
f = 0.1 Hz to 1 Hz
0.48
0.48
f = 0.1 Hz to 10 Hz
0.51
0.51
f = 10 Hz
1.89
1.89
f = 1 kHz
0.47
0.47
0 01%
0.01%
0 01%
0.01%
CL = 100 pF
6
6
MHz
CL = 100 pF,
59
5.9
59
5.9
MHz
VO(PP) = 20 V,
AVD = 1,
RL = 2 kΩ,
CL = 100 pF
668
668
kHz
RL = 2 kΩ,
CL = 100 pF
58°
58°
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µV
pA/√Hz
5–9
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common mode
C
Common-mode
d input
i
voltage
g range
g
TA†
TEST CONDITIONS
25°C
Ω
RS = 50 Ω,
2 5 V,
V
VO = 2.5
VIC = 2.5 V
Hi h l
High-level
l output voltage
l
Full range
L
Low-level
l
l output voltage
l
220
1900
8
– 0.8
Full range
MAX
220
1500
2000
100
8
– 0.8
– 2.2
– 0.3
to
3.2
0
to
3
– 0.3
to
3.2
F ll range
Full
g
0
to
2.7
– 0.3
to
2.9
0
to
2.7
– 0.3
to
2.9
3.9
4.1
3.9
4.1
3.8
4
3.8
4
3.4
3.7
3.4
3.7
25°C
Full range
3.8
3.8
3.7
3.7
3.5
25°C
10
µA
3.5
75
125
150
225
150
225
1.4
1.2
IOL = 10 mA
50
nA
V
125
Full range
25°C
µV
V
75
1.2
Full range
–2
– 2.2
0
to
3
IOH = – 15 mA
IOH = 100 µA
100
200
–2
UNIT
µV/°C
17
1.7
25°C
RS = 50 Ω
VIC = ± 2.5 V,
RL = 2 kΩ,
VO = 1 V to – 1.5 V
TYP
200
25°C
IOL = 15 mA
IOL = 100 µA
IOL = 1 mA
MIN
17
1.7
Full range
IOl = 150 µA
IOL = 1.5 mA
VOL
MAX
2400
25°C
IOH = 1 mA
IOH = 10 mA
TLE2142AI
TYP
Full range
IOH = – 150 µA
IOH = – 1.5 mA
VOH
TLE2142I
MIN
1.4
175
175
225
225
1.2
1.2
220
50
220
mV
V
mV
V
AVD
Large signal differential
Large-signal
voltage amplification
ri
Input resistance
25°C
70
70
MΩ
ci
Input capacitance
25°C
2.5
2.5
pF
zo
Open-loop output
impedance
f = 1 MHz
25°C
30
30
Ω
CMRR
Common mode rejection
Common-mode
ratio
VIC = VICRmin,
min
kSVR
Supply-voltage
Supply
voltage rejection
ratio (∆VCC ± /∆VIO)
VCC ± = ± 2.5 V to ± 15 V,
RS = 50 Ω
ICC
Supply current
VO = 2.5 V,,
VIC = 2.5 V
Full range
RS = 50 Ω
25°C
85
Full range
80
25°C
90
Full range
85
25°C
No load,,
† Full range is – 40°C to 105°C.
5–10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
V/mV
10
118
85
118
dB
80
106
90
106
dB
85
6.6
8.8
9.2
6.6
8.8
9.2
mA
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
operating characteristics, VCC = 5 V, TA = 25°C
PARAMETER
SR +
Positive slew rate
SR –
Negative slew rate
ts
Settling time
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input
Peak-to-peak
noise voltage
In
Equivalent input noise current
THD + N
Total harmonic distortion plus
noise
B1
Unity-gain bandwidth
BOM
TEST CONDITIONS
TLE2142I
MIN
TYP
TLE2142AI
MAX
MIN
TYP
45
45
42
42
To 0.1%
0.16
0.16
To 0.01%
0.22
0.22
RS = 20 Ω,
f = 10 Hz
15
15
RS = 20 Ω,
f = 1 kHz
10.5
10.5
AVD = – 1,
CL = 500 pF
RL = 2 kن,
AVD = – 1,
2.5-V step
f = 0.1 Hz to 1 Hz
0.48
0.48
f = 0.1 Hz to 10 Hz
0.51
0.51
f = 10 Hz
1.92
1.92
f = 1 kHz
0.5
0.5
MAX
UNIT
V/µs
µs
nV/√Hz
µV
pA/√Hz
VO = 1 V to 3 V,
AVD = 2,
RL = 2 kن,
RL = 2 kن,
f = 10 kHz
0 0052%
0.0052%
0 0052%
0.0052%
CL = 100 pF
5.9
5.9
MHz
Gain-bandwidth product
RL = 2 kن,
f = 100 kHz
CL = 100 pF,
58
5.8
58
5.8
MHz
Maximum output
output-swing
swing
bandwidth
VO(PP) = 2 V,
AVD = 1,
RL = 2 kن,
CL = 100 pF
660
660
kHz
RL = 2 kن,
CL = 100 pF
57°
57°
φm
Phase margin at unity gain
† RL terminates at 2.5 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–11
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common mode
C
Common-mode
d input
i
voltage
g range
g
TA†
TEST CONDITIONS
25°C
Ω
RS = 50 Ω,
0
VIC = 0,
VO = 0
Full range
M i
Maximum
negative
i peak
k
output voltage swing
1200
7
TYP
275
– 0.7
100
7
– 1.5
– 0.7
– 1.7
– 15
to
13
– 15.3
to
13.2
F ll range
Full
g
– 15
to
12.7
– 15.3
to
12.9
– 15
to
12.7
– 15.3
to
12.9
13.8
14.1
13.8
14.1
13.7
14
13.7
14
13.3
13.7
13.3
13.7
25°C
Full
g
F ll range
13.7
13.7
13.6
13.6
13.3
25°C
IO = 15 mA
IO = 100 µA
Full
F ll range
g
– 14.9
– 14.7
– 14.9
– 14.5
– 14.8
– 14.5
– 14.8
– 13.4
– 13.8
– 13.4
– 13.8
– 14.6
– 14.6
– 14.5
– 14.5
– 13.4
– 13.4
25°C
100
Full range
40
Large signal differential
Large-signal
voltage amplification
ri
Input resistance
ci
Input capacitance
zo
Open-loop output impedance
f = 1 MHz
CMRR
Common mode rejection
Common-mode
ratio
VIC = VICRmin
RS = 50 Ω
25°C
85
Full range
80
kSVR
Supply voltage rejection
Supply-voltage
ratio (∆VCC ± /∆VIO)
VCC ± = ± 2.5 V to ± 15 V,
RS = 50 Ω
25°C
90
Full range
85
IOS
Short-circuit output current
VO = 0
VID = 1 V
VID = – 1 V
ICC
Supply current
VO = 0
0,
No load
– 1.5
nA
µA
V
V
450
100
V
450
V/mV
40
25°C
65
65
MΩ
25°C
2.5
2.5
pF
25°C
30
30
Ω
25°C
108
85
108
106
90
106
– 50
– 25
– 50
31
20
31
† Full range is – 40°C to 105°C.
• DALLAS, TEXAS 75265
dB
85
20
25°C
dB
80
– 25
Full range
POST OFFICE BOX 655303
µV
13.3
– 14.7
AVD
100
– 1.7
– 15.3
to
13.2
UNIT
µV/°C
200
– 15
to
13
IO = – 15 mA
IO = – 100 µA
750
17
1.7
25°C
RS = 50 Ω
MAX
1400
200
Full range
VO = ± 10 V
V, RL = 2 kΩ
MIN
17
1.7
25°C
IO = 1 mA
IO = 10 mA
5–12
290
Full range
IO = 150 µA
IO = 1.5 mA
VOM –
MAX
1800
25°C
IO = – 1 mA
IO = – 10 mA
TLE2142I
TYP
Full range
IO = – 150 µA
IO = – 1.5 mA
M i
Maximum
positive
i i peak
k
VOM +
output voltage swing
TLE2142I
MIN
6.9
9
9.4
6.9
mA
9
9.4
mA
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
SR +
Positive slew rate
SR –
Negative slew rate
ts
Settling time
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input
Peak-to-peak
noise voltage
In
Equivalent input noise current
THD + N
Total harmonic distortion plus
noise
VO(PP) = 20 V,
AVD = 10,
RL = 2 kΩ,
f = 10 kHz
B1
Unity-gain bandwidth
RL = 2 kΩ,
Gain-bandwidth product
BOM
φm
TLE2142I
MIN
TYP
30
30
TLE2142AI
MAX
MIN
TYP
45
30
45
42
30
42
AVD = – 1,
CL = 500 pF
RL = 2 kΩ,
AVD = – 1,
10-V step
To 0.1%
0.34
0.34
To 0.01%
0.4
0.4
RS = 20 Ω,
f = 10 Hz
15
15
RS = 20 Ω,
f = 1 kHz
10.5
10.5
MAX
UNIT
V/µs
µs
nV/√Hz
f = 0.1 Hz to 1 Hz
0.48
0.48
f = 0.1 Hz to 10 Hz
0.51
0.51
f = 10 Hz
1.89
1.89
f = 1 kHz
0.47
0.47
0 01%
0.01%
0 01%
0.01%
CL = 100 pF
6
6
MHz
RL = 2 kΩ,
f =100 kHz
CL = 100 pF,
59
5.9
59
5.9
MHz
Maximum output
output-swing
swing
bandwidth
VO(PP) = 20 V,
AVD = 1,
RL = 2 kΩ,
CL = 100 pF
668
668
kHz
Phase margin at unity gain
RL = 2 kΩ,
CL = 100 pF
58°
58°
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µV
pA/√Hz
5–13
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
Input bias current
VICR
Common
Common-mode
mode
C
d input
i
voltage
g range
g
TA†
TEST CONDITIONS
25°C
Ω
RS = 50 Ω,
VO = 2.5
2 5 V,
V
VIC = 2.5 V
High
Hi
High-level
h level
l
l output
voltage
Full range
Low level
L
Low-level
l
l output
voltage
220
1900
8
TYP
MAX
200
1500
2200
100
8
25°C
– 0.8
–2
– 0.8
0
to
3
– 0.3
to
3.2
0
to
3
– 0.3
to
3.2
F ll range
Full
g
0
to
2.7
– 0.3
to
2.9
0
to
2.7
– 0.3
to
2.9
3.9
4.1
3.9
4.1
3.8
4
3.8
4
3.4
3.7
3.4
3.7
25°C
IOH = – 15 mA
IOH = 100 µA
Full
g
F ll range
3.75
3.75
3.65
3.65
3.45
25°C
IOL = 15 mA
IOL = 100 µA
Full range
5
µA
3.45
75
125
150
225
150
225
1.4
1.2
1.4
200
200
250
250
1.25
VIC = ± 2.5 V,
RL = 2 kΩ,
VO = 1 V to – 1.5 V
nA
V
125
Full
F ll range
g
50
µV
V
75
1.2
25°C
–2
– 2.3
25°C
RS = 50 Ω
100
200
– 2.3
UNIT
µV/°C
17
1.7
200
Full range
IOL = 1 mA
IOL = 10 mA
MIN
17
1.7
Full range
IOL = 150 µA
IOL = 1.5 mA
VOL
MAX
2600
25°C
IOH = 1 mA
IOH = 10 mA
TLE2142AM
TYP
Full range
IOH = – 150 µA
IOH = – 1.5 mA
VOH
TLE2142M
MIN
220
1.25
50
220
mV
V
mV
V
AVD
Large signal differential
Large-signal
voltage amplification
ri
Input resistance
25°C
70
70
MΩ
ci
Input capacitance
25°C
2.5
2.5
pF
zo
Open-loop output
impedance
f = 1 MHz
25°C
30
30
Ω
CMRR
Common mode
Common-mode
rejection ratio
VIC = VICRmin
min,
kSVR
Supply-voltage
Supply
voltage rejection
ratio (∆VCC ± /∆VIO)
VCC ± = ± 2.5 V to ± 15 V,
RS = 50 Ω
ICC
Supply current
VO = 2.5 V,
VIC = 2.5 V
RS = 50 Ω
25°C
85
Full range
80
25°C
90
Full range
85
25°C
No load,
Full range
† Full range is – 55°C to 125°C.
5–14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
V/mV
5
118
85
118
dB
80
106
90
106
dB
85
6.6
8.8
9.2
6.6
8.8
9.2
mA
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
operating characteristics, VCC = 5 V, TA = 25°C
PARAMETER
SR +
Positive slew rate
SR –
Negative slew rate
ts
Settling time
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent
Peak-to-peak
input noise voltage
In
Equivalent input noise current
THD + N
Total harmonic distortion plus
noise
B1
Unity-gain bandwidth
Gain-bandwidth product
BOM
Maximum output
output-swing
swing
bandwidth
φm
Phase margin
† RL terminates at 2.5 V.
TEST CONDITIONS
TLE2142M
MIN
TYP
TLE2142AM
MAX
MIN
TYP
45
45
42
42
To 0.1%
0.16
0.16
To 0.01%
0.22
0.22
AVD = – 1,
CL = 500 pF
RL = 2 kن,
AVD = – 1,
2.5-V step
RS = 20 Ω,
f = 10 Hz
15
15
RS = 20 Ω,
f = 1 kHz
10.5
10.5
f = 0.1 Hz to 1 Hz
0.48
0.48
f = 0.1 Hz to 10 Hz
0.51
0.51
f = 10 Hz
1.92
1.92
f = 1 kHz
0.5
0.5
MAX
UNIT
V/µs
µs
nV/√Hz
µV
pA/√Hz
VO = 1 V to 3 V,
AVD = 2,
RL = 2 kن,
RL = 2 kن,
f = 10 kHz
0 0052%
0.0052%
0 0052%
0.0052%
CL = 100 pF
5.9
5.9
MHz
RL = 2 kن,
f = 100 kHz
CL = 100 pF
58
5.8
58
5.8
MHz
VO(PP) = 2 V,
AVD = 1,
RL = 2 kن,
RL = 2 kن,
CL = 100 pF
660
660
kHz
CL = 100 pF
57°
57°
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–15
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
IIO
Input offset current
IIB
Input bias current
Common
Common-mode
mode
C
d input
i
voltage
g range
g
1200
7
TYP
MAX
275
750
1600
100
7
25°C
– 0.7
– 0.7
– 1.8
– 15
to
13
– 15.3
to
13.2
– 15
to
13
– 15.3
to
13.2
F ll range
Full
g
– 15
to
12.7
– 15.3
to
12.9
– 15
to
12.7
– 15.3
to
12.9
13.8
14.1
13.8
14.1
13.7
14
13.7
14
13.3
13.7
13.3
13.7
25°C
IO = – 15 mA
IO = – 100 µA
Full
g
F ll range
13.7
13.7
13.6
13.6
13.3
25°C
IO = 15 mA
IO = 100 µA
Full
F ll range
g
– 14.9
– 14.7
– 14.9
– 14.5
– 14.8
– 14.5
– 14.8
– 13.4
– 13.8
– 13.4
– 13.8
– 14.6
– 14.6
– 14.5
– 14.5
– 13.4
100
Full range
20
µV
nA
µA
V
V
13.3
– 14.7
25°C
– 1.5
– 1.8
25°C
RS = 50 Ω
100
250
– 1.5
UNIT
µV/°C
17
1.7
250
Full range
IO = 1 mA
IO = 10 mA
MIN
17
1.7
25°C
IO = 150 µA
IO = 1.5 mA
VOM –
290
Full range
IO = – 1 mA
IO = – 10 mA
M i
Maximum
negative
i peak
k
output voltage swing
MAX
2000
Full range
RS = 50 Ω
TLE2142AM
TYP
Full range
IO = – 150 µA
IO = – 1.5 mA
M i
Maximum
positive
i i peak
k
VOM +
output voltage swing
TLE2142M
MIN
25°C
0
VIC = 0,
VICR
TA†
TEST CONDITIONS
V
– 13.4
450
100
450
AVD
Large signal differential
Large-signal
voltage amplification
ri
Input resistance
25°C
65
65
MΩ
ci
Input capacitance
25°C
2.5
2.5
pF
zo
Open-loop output
impedance
f = 1 MHz
25°C
30
30
Ω
CMRR
Common mode rejection
Common-mode
ratio
VIC = VICRmin,
RS = 50 Ω
25°C
85
Full range
80
kSVR
Supply-voltage
Supply
voltage rejection
ratio (∆VCC ± /∆VIO)
VCC ± = ± 2.5 V to ± 15 V,
RS = 50 Ω
25°C
90
Full range
85
IOS
Short-circuit output current
VO = 0
ICC
Supply current
VO = 0,
VIC = 2.5 V
VO = ± 10 V
V,
RL = 2 kΩ
VID = 1 V
VID = – 1 V
25°C
108
106
90
106
dB
85
– 50
20
31
20
31
• DALLAS, TEXAS 75265
dB
80
– 25
Full range
POST OFFICE BOX 655303
85
– 50
† Full range is – 55°C to 125°C.
5–16
108
– 25
25°C
No load,
V/mV
20
6.9
9
9.4
6.9
mA
9
9.4
mA
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
SR +
Positive slew rate
SR –
Negative slew rate
ts
Settling time
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input
Peak-to-peak
noise voltage
In
Equivalent input noise current
THD + N
Total harmonic distortion plus
noise
VO(PP) = 20 V,
AVD = 10,
B1
Unity-gain bandwidth
RL = 2 kΩ,
Gain-bandwidth product
RL = 2 kΩ,
f = 100 kHz
BOM
Maximum output-swing bandwidth
VO(PP) = 20 V,
AVD = 1,
φm
Phase margin at unity gain
RL = 2 kΩ,
TLE2142M
MIN
TYP
27
27
TLE2142AM
MAX
MIN
TYP
45
27
45
42
27
42
RL = 2 kΩ,
CL = 100 pF
AVD = – 1,
AVD = – 1,
10-V step
To 0.1%
0.34
0.34
To 0.01%
0.4
0.4
RS = 20 Ω,
f = 10 Hz
15
15
RS = 20 Ω,
f = 1 kHz
10.5
10.5
MAX
UNIT
V/µs
µs
nV/√Hz
f = 0.1 Hz to 1 Hz
0.48
0.48
f = 0.1 Hz to 10 Hz
0.51
0.51
f = 10 Hz
1.89
1.89
f = 1 kHz
0.47
0.47
0 01%
0.01%
0 01%
0.01%
CL = 100 pF
6
6
MHz
CL = 100 pF,
59
5.9
59
5.9
MHz
RL = 2 kΩ,
CL = 100 pF
668
668
kHz
CL = 100 pF
58°
58°
RL = 2 kΩ,
f = 10 kHz
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µV
pA/√Hz
5–17
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V, TA = 25°C
PARAMETER
VIO
IIO
Input offset voltage
IIB
Input bias current
VICR
C
Common-mode
d input
i p voltage
l g range
g
TEST CONDITIONS
RS = 50 Ω,
Ω
VIC = 0,
0
VO = 0
Input offset current
RS = 50 Ω
VOM + Maximum
M i
p
positive
ii p
peak
k output
p voltage
l g swing
i g
TLE2142Y
MIN
IO = – 150 µA
IO = – 1.5 A
IO = – 15 mA
m
IO = 150 µA
IO = 1.5 mA
TYP
MAX
150
875
UNIT
µV
7
100
nA
– 0.7
– 1.5
µA
– 15
to
13
– 15.3
to
13.2
13.8
14.1
13.7
14
V
V
13.3
13.7
– 14.7
– 14.9
– 14.5
– 14.8
– 13.4
– 13.8
100
450
V/mV
VOM –
Maximum
negative
g i peak
p k output
p voltage
M i
l g swing
i g
AVD
Large-signal differential voltage amplification
ri
Input resistance
65
MΩ
ci
Input capacitance
2.5
pF
zo
Open-loop output impedance
IO = 15 mA
VO = ± 10 V
V,
RL = 2 kΩ
VIC = VICRmin,
RS = 50 Ω
kSVR
Supply-voltage rejection ratio (∆VCC ± /∆VIO)
VCC ± = ± 2.5 V to ± 15 V,
RS = 50 Ω
IOS
Short-circuit output current
VO = 0
VID = 1 V
VID = – 1 V
ICC
Supply current
VO = 0,
No load
5–18
30
Ω
80
108
dB
85
106
dB
– 25
– 50
20
31
f = 1 MHz
CMRR Common-mode rejection ratio
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
V
6.9
mA
9
mA
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
IIO
Input offset voltage
Distribution
1
Input offset current
vs Free-air temperature
2
IIB
Input bias current
vs Free-air temperature
p
vs Common-mode input voltage
3
4
VOM +
M i
Maximum
p
positive
ii p
peak
k output
p voltage
l g
vs Supply voltage
vs Free-air temperature
p
vs Output current
5
6
7
VOM –
M i
Maximum
negative
g i p
peak
k output
p voltage
l g
vs Supply voltage
vs Free-air temperature
p
vs Output current
5
6
8
VOM
VO(PP)
Maximum peak output voltage
vs Settling time
9
Maximum peak-to-peak output voltage
vs Frequency
10
VOH
VOL
High-level output voltage
vs Output current
11
Low-level output voltage
vs Output current
12
AVD
Large-signal differential voltage amplification
vs Free-air temperature
p
vs Frequency
13
14
zo
Closed-loop output impedance
vs Frequency
15
IOS
Short-circuit output current
vs Free-air temperature
16
CMRR
Common-mode rejection ratio
vs Frequency
q
y
vs Free-air temperature
17
18
kSVR
Supply voltage rejection ratio
vs Frequency
q
y
vs Free-air temperature
19
20
ICC
Supply current
vs Free-air temperature
p
vs Supply voltage
21
22
Vn
Noise voltage
In
THD + N
SR
vs Frequency
23
Over a 10-second period
24
Equivalent input noise current
vs Frequency
25
Total harmonic distortion plus noise
vs Frequency
26
Slew rate
vs Free-air temperature
p
vs Load capacitance
27
28
Noninverting large signal
vs Time
29
Inverting large signal
vs Time
30
Small signal
vs Time
31
Unity-gain bandwidth
vs Load capacitance
32
Gain margin
vs Load capacitance
33
Phase margin
vs Load capacitance
34
Phase shift
vs Frequency
14
Pulse response
B1
φm
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–19
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
TLE2142
DISTRIBUTION OF
INPUT OFFSET VOLTAGE
20
24
18
IIIO
IO – Input Offset Current – nA
Percentage of Units – %
20
236 Units Tested From 1 Wafer Lot
VCC ± = ± 15 V
TA = 25°C
P Package
16
12
8
4
VO = 0
VIC = 0
16
14
12
10
VCC ± = ± 2.5 V
8
6
VCC ± = ± 15 V
4
2
0
– 800 – 600 – 400 – 200
0
200
400
600
0
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
800
VIO – Input Offset Voltage – µV
Figure 1
Figure 2
INPUT BIAS CURRENT
vs
FREE-AIR TEMPERATURE
INPUT BIAS CURRENT
vs
COMMON-MODE INPUT VOLTAGE
–1000
0
VCC ± = ± 2.5 V
– 0.2
– 900
– 800
VCC ± = ± 2.5 V
– 700
VCC ± = ± 15 V
– 600
IIB
uA
I IB – Input Bias Current – µA
I IB – Input Bias Current – nA
IIB
VO = 0
VIC = 0
– 0.4
– 0.6
TA = 125°C
– 0.8
TA = 25°C
–1
TA = – 55°C
– 1.2
– 500
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
– 1.4
–3
0
0.5
– 2.5 – 2
–1.5 –1 – 0.5
VIC – Common-Mode Input Voltage – V
Figure 3
Figure 4
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–20
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
15
RL = 2 kΩ
TA = 25°C
18
VOM
V
OM – Maximum Peak Output Voltage – V
VOM
V
OM – Maximum Peak Output Voltage – V
24
12
VOM +
6
0
–6
VOM –
–12
–18
3
6
9
12
15
18
21
14.6
RL = ∞
14.2
VOM +
13.8
RL = 2 kΩ
–13.8
–14.2
RL = 2 kΩ
VOM –
–14.6
RL = ∞
–15
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
– 24
0
VCC ± = ± 15 V
24
VCC ± – Supply Voltage – V
Figure 5
Figure 6
MAXIMUM NEGATIVE PEAK
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
14.6
VCC ± = ± 15 V
14.4
14.2
TA = 125°C
14
TA = 25°C
TA = – 55°C
13.8
13.6
– 0.1
– 0.4
–1
–4
–10
– 40
–100
VVOM–
OM – – Maximum Negative Peak Output Voltage – V
V OM+ – Maximum Positive Peak Output Voltage – V
MAXIMUM POSITIVE PEAK
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
–13.4
VCC ± = ± 15 V
–13.6
–13.8
TA = 125°C
–14
–14.2
TA = – 55°C
–14.4
TA = 25°C
–14.6
–14.8
– 15
0.1
0.4
IO – Output Current – mA
1
4
10
40
100
IO – Output Current – mA
Figure 7
Figure 8
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–21
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
MAXIMUM PEAK-TO-PEAK
OUTPUT VOLTAGE
vs
FREQUENCY
VOM
V
OM – Maximum Peak Output Voltage – V
12.5
V
O(PP) – Maximum Peak-to-Peak Output Voltage – V
V(OPP)
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SETTLING TIME
AVD = –1
VCC ± = ± 15 V
TA = 25°C
10
7.5
0.1%
0.01%
5
2.5
Rising
0
Falling
– 2.5
0.01%
–5
0.1%
–7.5
–10
–12.5
0
100
200
300
400
500
30
VCC ± = ± 15 V
RL = 2 kΩ
25
TA = 25°C
20
TA = 125°C
15
10
TA = – 55°C
5
0
100 k
400 k
Settling Time (ns)
Figure 9
4M
10 M
Figure 10
HIGH-LEVEL OUTPUT VOLTAGE
vs
OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
OUTPUT CURRENT
4.6
1400
VCC = 5 V
VOL
V OL – Low-Level Output Voltage – mV
VCC = 5 V
VV0H
OH – High-Level Output Voltage – V
1M
f – Frequency – Hz
4.4
TA = 125°C
4.2 TA = 25°C
4 TA = – 55°C
3.8
3.6
1200
TA = 125°C
1000
800
600
TA = 25°C
400
200
TA = – 55°C
3.4
– 0.1
–1
–10
–100
0
0.1
IO – Output Current – mA
1
10
IO – Output Current – mA
Figure 11
Figure 12
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
140
AVD
AVD – Large-Signal Differential
Voltage Amplification – dB
VCC ± = ± 15 V
VO = ± 10 V
ÁÁ
ÁÁ
ÁÁ
RL = 10 kΩ
120
RL = 2 kΩ
100
80
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
Figure 13
ÁÁ
ÁÁ
120
0°
110
20°
100
40°
90
60°
80 Phase Shift
80°
70
100°
60
120°
AVD
50
140°
40
160°
Phase Shift
AVD
AVD – Large-Signal Differential
Voltage Amplification – dB
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
180°
30
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
TA = 25°C
20
10
0
200°
220°
240°
– 10
1
10
100
1k
10 k 100 k
f – Frequency – Hz
1M
260°
10 M
Figure 14
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–23
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
CLOSED-LOOP OUTPUT IMPEDANCE
vs
FREQUENCY
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
60
100
I OS – Short-Circuit Output Current – mA
zo – Closed-Loop Output Impedance – Ω
30 Ω
10
1
AVD = 100
0.1
AVD = 10
AVD = 1
0.01
0.001
1k
10 k
100 k
1M
VCC ± = ± 15 V
VO = 0
50
VID = 1
40
30
VID = – 1
20
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
10 M
f – Frequency – Hz
Figure 15
Figure 16
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
120
VCC ± = ± 15 V
TA = 25°C
120
CMRR – Common-Mode Rejection Ratio – dB
CMRR – Common-Mode Rejection Ratio – dB
140
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
100
80
60
40
20
0
100
1k
10 k
100 k
1M
f – Frequency – Hz
VIC = VICRmin
VCC = 5 V
116
112
108
VCC ± = ± 15 V
104
100
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
Figure 17
Figure 18
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–24
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
110
kSVR
k SVR – Supply-Voltage Rejection Ratio – dB
kSVR
k SVR – Supply-Voltage Rejection Ratio – dB
160
140
kSVR +
120
kSVR –
100
80
60
40
VCC ± = ± 2.5 V to ± 15 V
TA = 25°C
20
0
10
100
1k
10 k
100 k
1M
VCC ± = ± 2.5 V to ± 15 V
108
106
104
102
100
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
10 M
f – Frequency – Hz
Figure 19
Figure 20
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
8
7.4
VO = 0
No Load
TA = 125°C
VCC ± = ± 15 V
6.6
VCC ± = ± 2.5 V
6.2
IDD
I CC – Supply Current – mA
IIDD
CC – Supply Current – mA
7
7
TA = 25°C
6
TA = – 55°C
5
5.8
VO = 0
No Load
5.4
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
4
0
4
Figure 21
8
12
16
20
|VCC ±| – Supply Voltage – V
24
Figure 22
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–25
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
INPUT NOISE VOLTAGE
OVER A 10-SECOND PERIOD
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
750
VCC ± = ± 15 V
f = 0.1 Hz to 10 Hz
TA = 25°C
VCC ± = ± 15 V
RS = 20 Ω
500
200
Input Noise Voltage – nV
Vn – Equivalent Input Noise Voltage – nV/ Hz
Vn
250
TA = – 55°C
150
TA = 125°C
100
TA = 25°C
50
250
0
– 250
– 500
– 750
0
1
10
100
1k
f – Frequency – Hz
10 k
0
2
4
Figure 23
THD + N – Total Harmonic Distortion + Noise
In – Equivalent Input Noise Current – pA/ Hz
1%
6
TA = – 55°C
4
TA = 25°C
2
TA = 125°C
0
100
1k
10 k
VO(PP) = 20 V
VCC ± = ± 15 V
TA = 25°C
AV = 100
RL = 600 Ω
0.1%
AV = 10
RL = 600 Ω
AV = 100
RL = 2 kΩ
0.01%
AV = 10
RL = 2 kΩ
0.001%
10
f – Frequency – Hz
Figure 25
100
1k
10 k
f – Frequency – Hz
Figure 26
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–26
10
TOTAL HARMONIC DISTORTION + NOISE
vs
FREQUENCY
8
10
8
Figure 24
EQUIVALENT INPUT NOISE CURRENT
vs
FREQUENCY
1
6
t – Time – s
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100 k
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SLEW RATE
vs
LOAD CAPACITANCE
SLEW RATE
vs
FREE-AIR TEMPERATURE
60
50
50
40
SR – Slew Rate – V/ µ s
SR – Slew Rate – V/ µ s
SR +
40
SR –
30
20
10
VCC ± = ± 15 V
AVD = – 1
RL = 2 kΩ
CL = 500 pF
SR+
30
20
SR –
10 VCC ± = ± 15 V
AVD = – 1
TA = 25°C
0
– 75 – 50 – 25
0
25
50
75 100 125 150
TA – Free-Air Temperature – °C
0
0.01
0.1
1
CL – Load Capacitance – nF
Figure 27
Figure 28
NONINVERTING
LARGE-SIGNAL
PULSE RESPONSE
INVERTING
LARGE-SIGNAL
PULSE RESPONSE
15
15
TA = 125°C
TA = 25°C
10
10
TA = 25°C
5
VO – Output Voltage – V
VO
VO – Output Voltage – V
VO
10
TA = – 55°C
0
TA = – 55°C
–5
TA = 25°C
VCC ± = ± 15 V
AVD = 1
RL = 2 kΩ
CL = 300 pF
–10
TA = – 55°C
5
0
TA = 125°C
TA = 25°C
–5
VCC ± = ± 15 V
AVD = –1
RL = 2 kΩ
CL = 300 pF
–10
TA = 125°C
–15
TA = – 55°C
TA = 125°C
–15
0
1
2
3
4
5
0
t – Time – µs
1
2
3
4
5
t – Time – µs
Figure 29
Figure 30
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–27
TLE2142, TLE2142A, TLE2142Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS064B – DECEMBER 1990 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
UNITY-GAIN BANDWIDTH
vs
LOAD CAPACITANCE
SMALL-SIGNAL
PULSE RESPONSE
7
100
VCC ± = ± 15 V
RL = 2 kΩ
50
0
VCC ± = ± 15 V
AVD = –1
RL = 2 kΩ
CL = 300 pF
TA = 25°C
– 50
6
B1
B
1 – Unity-Gain Bandwidth – MHz
VO – Output Voltage – mV
VO
TA = – 55°C
TA = 25°C
5
TA = 125°C
4
3
2
1
10
–100
0
400
800
1200
1600
100
t – Time – ns
Figure 31
70°
TA = 25°C
50°
– 55°C
8
6
125°C
4
2
TA = 125°C
40°
30°
20°
10°
25°C
0
10
TA = – 55°C
60°
φ m – Phase Margin
Gain Margin – dB
10
PHASE MARGIN
vs
LOAD CAPACITANCE
VCC ± = ± 15 V
AVD = 1
RL = 2 kΩ to ∞
VO = – 10 V to 10 V
12
10000
Figure 32
GAIN MARGIN
vs
LOAD CAPACITANCE
14
1000
CL – Load Capacitance – pF
100
1000
CL – Load Capacitance – pF
10000
0°
10
VCC ± = ± 15 V
RL = 2 kΩ
Figure 33
100
1000
CL – Load Capacitance – pF
10000
Figure 34
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–28
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor
product or service without notice, and advises its customers to obtain the latest version of relevant information
to verify, before placing orders, that the information being relied on is current.
TI warrants performance of its semiconductor products and related software to the specifications applicable at
the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are
utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each
device is not necessarily performed, except those mandated by government requirements.
Certain applications using semiconductor products may involve potential risks of death, personal injury, or
severe property or environmental damage (“Critical Applications”).
TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED
TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS.
Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI
products in such applications requires the written approval of an appropriate TI officer. Questions concerning
potential risk applications should be directed to TI through a local SC sales office.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards should be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein. Nor does TI warrant or represent that any license, either
express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property
right of TI covering or relating to any combination, machine, or process in which such semiconductor products
or services might be or are used.
Copyright  1995, Texas Instruments Incorporated