S324P Semiconductor Low Power Quad OP AMP Description The S324 consists of four independent high gain Internally frequency compensated operational amplifiers designed to operate from a single power supply over a wide range of voltage. Features • • • • • • Input common mode voltage range includes ground Internally frequency compensated for unity gain Large DC voltage gain : 100dB Wide bandwidth for unity gain : 1 MHz Very low power consumption Wide supply voltage range : Single : 3V ~ 36V, Dual : ±1.5 ~ ±18V Applications • Transducer amplifier • DC gain blocks • Conventional operational amplifiers Ordering Information Type NO. S324P Marking S324P Package Code DIP-14 Outline Dimensions unit : mm Block Diagram KSI-L001-001 1 S324P Absolute maximum ratings Characteristic Symbol Ratings Unit Supply voltage VCC 36 or ±18 V Differential input voltage VIND 36 V Input voltage VIN -0.3 ~ +36 V Power Dissipation PD 570 mW Operating temperature Topr -40 ~ +85 °C Storage temperature Tstg -55 ~ 150 °C Electrical Characteristics (Unless otherwise specified. VCC = 5V, VEE = GND and –40 °C ≤ Ta ≤ +85 °C) Characteristic Symbol Input offset voltage VIOS Input offset current IIOS Input bias current IIB Test Condition VCC = 5~30V Rg = 0Ω Min. Typ. Max. Unit - 2 7 mV - - 5 30 nA - - 45 150 nA Input common mode voltage range VICR VCC = 30V 0 - VCC –1.5 V Supply current ICC RL = ∞, All Channel - 0.7 1.2 mA Large signal voltage gain GV VCC = 15V RL ≥ 2 KΩ 86 100 - dB RL=2 KΩ 26 - - RL=10 KΩ 27 28 - - 5 20 mV Output voltage swing VOH VOL VCC = 30V VCC =5V, RL ≤10 KΩ V Common mode rejection ratio CMRR (Ta=25 °C) 65 85 - dB Power supply rejection ratio PSRR (Ta=25 °C) 65 100 - dB VCC = 15V VIN+ = 1V, VIN- = 0V 20 40 - mA VCC = 15V VIN+ = 0V, VIN- = 1V 10 20 - mA VOUT = 200mV, VIN+= 0V, VIN-= 1V, VCC= 15V 12 45 - µA Output source current Output sink current IO+ IO- KSI-L001-001 2 S324P Electrical Characteristic Curves Fig. 1 ICC-VCC Fig. 2 IIB-VCC Fig. 3 VIOS-Ta Fig. 4 IO-Ta Fig. 5 CMRR-f Fig. 6 VOR-f KSI-L001-001 3