SW1314E-V Semiconductor Chip LED Lamp Features • • • • 1.6mm(L)×0.8mm small size surface mount type Thin package of 0.4mm(H) thickness Transparent clear lens optic Low power consumption type chip LED • E ; ESD Protected (±2.0kv, 3 times @100pF, 1.5kΩ) Applications • • • • LCD backlighting Keypad backlighting Symbol backlighting Front panel indicator lamp Outline Dimensions unit : KLW-3000-000 mm 1 SW1314E-V Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 80 mW Forward Current IF 20 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -25∼80 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 2 240℃ for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended soldering Temperature Profile 2-1) Preheating 100℃ to 150℃ within 2 minutes Soldering 240℃ within 5 seconds Gradual cooling (Avoid quenching) Electrical Characteristics Characteristic Symbol Test Condition Min Typ Max VF IF= 5mA - 3.1 3.4 V IV IF= 5mA 15 40 65 mcd 0.160 - 0.230 - 0.120 - 0.230 - - ±65 - - ±70 - Forward Voltage *3Luminous Intensity X *4Chromaticity Coordinates *5Half Angle IF= 5mA Y θ1/2 X Y IF= 5mA KLW-3000-000 Unit deg 2 SW1314E-V *3. Forward Voltage Maximum tolerance for ±0.1V *4. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% (The test result of IF=5mA is only for reference) *5. CIE Coordinates bin limits will have ±0.02 tolerance *6. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity Iv / VF Grade Classification Test Condition @IF=5mA Luminous Intensity Forward Voltage A : 13~22 0 : 2.6~2.8 B : 22~38 1 : 2.8~3.0 C : 38~65 2 : 3.0~3.2 3 : 3.2~3.4 (Do not use to combine grade classification. It must be used separately grade classification) KLW-3000-000 3 SW1314E-V Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5-1 Radiation Diagram(X) Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%] KLW-3000-000 Relative Luminous Intensity Iv [%] 4 SW1314E-V Chromaticity Diagram(Y) ♦ CIE 1931 UCS Diagram a b Chromaticity Diagram(Y) ● CIE Coordinates Grade Classification Color Bin a CIE Coordinates X Y 0.160 0.210 0.160 0.165 0.230 0.185 0.230 0.230 Color Bin b KLW-3000-000 CIE Coordinates X Y 0.160 0.165 0.160 0.120 0.230 0.140 0.230 0.185 5 SW1314E-V These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KLW-3000-000 6