SB3318-G/SB3318-G(B) Semiconductor High Brightness LED Lamp Features • Colorless transparency lens type • φ3mm(T-1) all plastic mold type • Super luminosity Outline Dimensions unit : STRAIGHT TYPE mm STOPPER TYPE 3.0±0.2 3.0±0.2 5.3±0.2 5.3±0.2 2.9±0.2 2.9±0.2 5.2±0.5 0.4 23.0MIN 0.4 23.0MIN 1.0MIN 1.0MIN 2.54 NOM 2.54 NOM 1 2 3.6±0.2 1 2 3.6±0.2 3.8±0.2 3.8±0.2 PIN Connections 1.Anode 2.Cathode KLB-3001-001 1 SB3318-G/SB3318-G(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 85 mW Forward Current IF 20 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -25∼85 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 250℃ for 3 seconds Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms Electrical Characteristics Characteristic Forward Voltage 2 * Luminous Intensity *3 Dominant Wavelength Spectrum Bandwidth Reverse Current 4 * Half angle Symbol Test Condition Min. Typ. Max. Unit VF IF= 20mA - 3.4 3.8 V IV IF= 20mA 155 230 520 mcd λD Δλ IR IF= 20mA - 465 - nm IF= 20mA - 26 - nm VR=4V - - 10 uA θ1/2 IF= 20mA - ±45 - deg *2. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% *3. Dominant Wavelength Maximum tolerance for each Grade Classification limit is ±1nm *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ● VF / IV / λP Grade Classification Test Condition @IF = 20mA Forward Voltage [V] Luminous Intensity [mcd] 1 = 2.9 ~ 3.2 M = 155 ~ 230 2 = 3.2 ~ 3.5 N = 230 ~ 350 3 = 3.5 ~ 3.8 O = 350 ~ 520 Dominant eavelength [nm] KLB-3001-001 a = 460 ~ 465 b = 466 ~ 470 2 SB3318-G/SB3318-G(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Forward Fig. 3 IF – Ta Current IF [mA] Forward Relative Intensity [%] Current IF [mA] Fig.4 Spectrum Distribution Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KLB-3001-001 3 SB3318-G/SB3318-G(B) These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KLB-3001-001 4