AZ DISPLAYS, INC. Complete LCD Solutions ACM1601D SERIES LCD MODULE 1.0 PHYSICAL DATA Item Nominal Dimensions / Available Options Unit Number of Characters 16 characters x 1 line - Character Format 5 x 7 dots with cursor - Overall Module Size (W x H x D) 122.0 x 33.0 x max 14.5 for LED backlight version 122.0 x 33.0 x max 9.5 for reflective version mm Dot Size (W x H) 0.92 x 1.10 mm Dot Pitch (W x H) 0.98 x 1.16 mm Duty 1/16 - Controller IC KS0066 - LC Fluid Options STN - Polarizer Options Reflective, Transflective, Transmissive - Backlight Options LED - Temperature Range Options Standard, Wide temp - 2.0 ABSOLUTE MAXIMUM RATINGS Item Symbol Min Typ Max Unit Operating temperature (Standard) Top 0 - 50 °C Storage temperature (Standard) Tst -20 - 70 °C Operating temperature (Wide temp) Top -20 - +70 °C Storage temperature (Wide temp) Tst -30 - +80 °C Input voltage VI VSS - VDD V Supply voltage for logic VDD-VSS 0 5.0 6.5 V Supply voltage for LCD drive (Standard) VDD-VO 0 - 6.5 V Supply voltage for LCD drive (Wide temp) VDD-VO 0 - 13.5 V 3.0 OPTICAL CHARACTERISTICS (Ta = 25°C, VDD = 5.0V ± 0.25V, STN LC Fluid) Item Symbol Condition Min Typ Max Unit Viewing angle (horizontal) θ Cr ≥ 2.0 ±30 - ±45 deg Viewing angle (vertical) φ Cr ≥ 2.0 60 - 80 deg Contrast Ratio Cr φ=0°, θ=0° 4.5 - 10 Response time (rise) Tr φ=0°, θ=0° - 120 240 ms Response time (fall) Tf φ=0°, θ=0° - 155 310 ms AZ DISPLAYS, INC. 1 6/5/97 ACM1601D SERIES LCD MODULE 4.0 ELECTRICAL CHARACTERISTICS (Ta = 25°C, VDD = 5.0V ± 0.25V) Item Symbol Condition Min Typ Max Unit Supply voltage for LCD drive (Std temp) VDD-VO Ta = 25°C 4.8 V Supply voltage for LCD drive (Wide temp) VDD-VO Ta = 25°C 6.1 V Input voltage VI - 4.75 5.0 5.25 V Input high voltage VIH - 2.2 - VDD V Input low voltage VIL - 0 - 0.6 V Output high voltage VOH IOH=0.2mA 2.4 - - V Output low voltage VOL IOL=1.2mA - - 0.4 V Supply current IDD VDD=5.0V - 2.0 mA Input leakage current ILKG - - - 1.0 uA LED power supply current ILED VLED=5V, R=6.8Ω - 120 - mA 5.0 INTERFACE PIN CONNECTIONS Pin No. Symbol Level Pin Description Function 1 VSS - Ground 0V 2 VDD - Supply voltage for logic +5V 3 VO - LCD contrast adjust By user 4 RS H/L Register select H: Data; L: Instruction code 5 R/W H/L Read / write H: Data read, L: Data write 6 E H, H→L Enable Start signal for data read/write 7 DB0 H/L Data bit 0 8-bit interface 8 DB1 H/L Data bit 1 8-bit interface 9 DB2 H/L Data bit 2 8-bit interface 10 DB3 H/L Data bit 3 8-bit interface 11 DB4 H/L Data bit 4 4-bit or 8-bit interface 12 DB5 H/L Data bit 5 4-bit or 8-bit interface 13 DB6 H/L Data bit 6 4-bit or 8-bit interface 14 DB7 H/L Data bit 7 4-bit or 8-bit interface A A - Anode for LED backlight Power supply for LED backlight K K - Cathode for LED backlight Power supply for LED backlight AZ DISPLAYS, INC. 2 6/5/97 ACM1601D SERIES LCD MODULE 6.0 POWER SUPPLY VDD VDD VO +5V VR VO +5V VR -5V VSS VSS Standard temp range Wide temp range VR = 10KΩ ~ 20KΩ VR = 10KΩ ~ 20KΩ 7.0 BLOCK DIAGRAM 1 VSS 2 VDD 3 VO 4 RS 5 R/W 6E 7 DB0 14 DB7 COM1 U1 COM9 LCD 16 X 1 COM 8 COM8 8 COM16 SEG1----------SEG80 40 8 40 40 A K AZ DISPLAYS, INC. LED B/L 3 6/5/97 ACM1601D SERIES LCD MODULE 8.0 TIMING CHARACTERISTICS (KS0066 Controller) Item Symbol Test Condition Min. Typ. Max. Unit Enable cycle time tCYC Fig. a, Fig. b 500 - - ns Enable pulse width PWEH Fig. a, Fig. b 220 - - ns Enable rise/fall time tEr , tEf Fig. a, Fig. b - - 25 ns RS, R/W set up time tAS Fig. a, Fig. b 40 - - ns RS, R/W hold time tH1 Fig. a, Fig. b 10 - - ns tDSW Fig. a 60 - - ns Data hold time tH2 Fig. a 10 - - ns Data delay time tDDR Fig. b - - 120 ns Data hold time tH2 Fig. b 20 - - ns Data set up time 2.2V - - 2.2V RS - 0.6V 0.6V - t AS R/W t H1 - 0.6V - 0.6V PW EH t H1 2.2V - - 2.2V E t Ef t DSW 0.6V - 0.6V - - 0.6V t Er t H2 2.2V - - 2.2V DB0-DB7 - 0.6V Valid Data 0.6V - t CYC Fig. a Interface timing (data write) 2.2V - - 2.2V RS - 0.6V 0.6V - t AS t H1 2.2V - - 2.2V R/W t H1 PW EH - 2.2V E 0.6V - t Er t Ef 2.2V - 0.6V t DDR - 2.2V DB0-DB7 0.6V - t H2 - 0.6V 2.2V - Valid Data 0.6V - t CYC Fig. b Interface timing (data read) AZ DISPLAYS, INC. 4 6/5/97 12 13 14 11 3 4 5 6 7 8 9 10 1 2 DB3 DB4 DB5 DB6 DB7 R/W E DB0 DB1 DB2 V SS V DD V0 RS Pin No. Symbol 25.0±0.3 4.0 0.1 23.8±0.5 1.1 2.0±0.2 13.0±0.3 4.4 4.4 1 14-ø1.0 P2.54X13=33.02 14 106.2±0.5 99.0±0.3 12.0 115.0±0.3 4-R1.5 4.4 4-ø3.5 K A 5.08 1.1 122.0±0.5 16.0±0.5 17.0±0.5 MAX9.5 (W/O, EL) MAX14.5 (LED) SCALE : THIRD ANGLE PROJECT NONE mm ACM1601D DRAW DWG-NO TITLE AZ DISPLAYS, INC. ab cd e 0.06 4.84 UNIT : DATE 0.92 1.16 LED B.L. MAX 14.5 1.6 9.3 DESIGN CHECK APPROVE NAME W/O B.L. EL B.L. MAX 9.5 1.6 4.65 1.10 0.06 0.5 0.2