CDI-DIODE CD3154

• ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE
CD3154
thru
• 8.4 VOLT NOMINAL ZENER VOLTAGE + 5%
CD3156
• MONOLITHIC TEMPERATURE COMPENSATED ZENER REFERENCE CHIPS
• ELECTRICALLY SIMILAR TO 1N3154 THRU 1N3156
• COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES,
WITH THE EXCEPTION OF SOLDER REFLOW
38 MILS
23 MILS
38 MILS
10 MILS
MAXIMUM RATINGS
11 MILS
23 MILS
Operating Temperature: -65°C to +175°C
Storage Temperature: -65°C to +175°C
FIGURE 1
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified.
JEDEC
TYPE
NUMBER
ZENER
VOLTAGE
MAXIMUM
MAXIMUM
VOLTAGE
TEMPERATURE
ZENER
TEMPERATURE
RANGE
IMPEDANCE
STABILITY
ZZT
∆V
ZT
MAXIMUM
V @I
ZT
ZT
ZENER
TEST
CURRENT
I
ZT
VOLTS
mA
OHMS
mV
CD3154
8.00-8.80
10
25
130
-55 to + 100
0.01
CD3155
8.00-8.80
10
25
65
-55 to + 100
0.005
CD3156
8.00-8.80
10
25
26
-55 to + 100
0.002
(Note 1)
EFFECTIVE
TEMPERATURE
COEFFICIENT
(Note 2)
°C
% / °C
DESIGN DATA
METALLIZATION:
Top: C (Cathode) .............Al
A (Anode) ................Al
Back:.................................Au
AL THICKNESS.......25,000 Å Min
GOLD THICKNESS...4,000 Å Min
CHIP THICKNESS.............10 Mils
NOTE 1
Zener impedance is derived by superimposing on lZT @ 60Hz rms a.c. current equal
to 10% of lZT.
NOTE 2
The maximum allowable change observed over the entire temperature range
i.e.,the diode voltage will not exceed the specified mV at any discrete
temperature between the established limits, per JEDEC standard No. 5.
CIRCUIT LAYOUT DATA:
Backside must be electrically
isolated.
Backside is not cathode.
For Zener operation cathode must
be operated positive with respect
to anode.
TOLERANCES: ALL
Dimensions + 2 mils
22 COREY STREET, MELROSE, MASSACHUSETTS 02176
PHONE (781) 665-1071
FAX (781) 665-7379
WEBSITE: http://www.cdi-diodes.com
E-mail: [email protected]
CD3154
CD3156
600
Pd, Rated Power
Dissipation (mW)
thru
500
400
300
200
100
0
0
25
50
75
100
125
150
TL, Ambient temperature (C°)
100
FIGURE 2
50
10
5
1
8
9
10
11
12
13
OPERATING CURRENT lZT (mA)
FIGURE 3
ZENER IMPEDANCE
VS.
OPERATING CURRENT
+.0015
CHANGE IN TEMPERATURE COEFFICIENT ( %/°C)
ZENER IMPEDANCE ZZT (OHMS)
POWER DERATING CURVE
+.0010
+.0005
0
-.0005
-.0010
-.0015
6
8
10
12
OPERATING CURRENT lZT (mA)
14
FIGURE 4
TYPICAL CHANGE OF TEMPERATURE COEFFICIENT
WITH CHANGE IN OPERATING CURRENT
175