IS/ISO 9002 Lic# QSC/L- 000019.2 Continental Device India Limited An IS/ISO 9002 and IECQ Certified Manufacturer PNP SILICON PLANAR EPITAXIAL TRANSISTORS BC 446, A, B BC 448, A, B BC 450, A, B TO-92 Plastic Package General Purpose High Voltage Transistors. ABSOLUTE MAXIMUM RATINGS (Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL TEST CONDITION MIN VCEO Collector Emitter Voltage 60 VCBO Collector Base Voltage 60 VEBO 5 Collector Current Continuous IC 300 Total Device Dissipation@ Ta=25ºC Derate Above 25ºC Total Device Dissipation@ Tc=25ºC Derate Above 25ºC Operating And Storage Junction Temperature Range PD Emitter Base Voltage PD Tj, Tstg TYP MAX UNITS 80 100 V 80 100 V 5 5 V 625 5 1.5 12 -55 to +150 mA mW mW/ ºC W mW/ ºC ºC THERMAL RESISTANCE Junction to ambient Rth(j-a) 200 ºC/W Junction to case Rth(j-c) 83.3 ºC/W Continental Device India Limited Data Sheet Page 1 of 4 SILICON PLANAR EPITAXIAL TRANSISTORS BC 446, A, B BC 448, A, B BC 450, A, B TO-92 Plastic Package ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL TEST CONDITION MIN BVCEO * IC=1mA,IB=0 Collector Emitter BreakdownVoltage BC446 60 BC448 80 BC450 100 BVCBO IC=100uA, IE =0 Collector Base Breakdown Voltage BC446 60 BC448 80 BC450 100 BVEBO IE=10uA, IC=0 5 Emitter Base Breakdown Voltage ICBO Collector-Cut off Current TYP MAX UNITS V V V V V V V BC446 VCB =40V, IE =0 100 nA BC448 VCB =60V, IE =0 100 nA BC450 VCB =80V, IE =0 100 nA hFE* DC Current Gain NON SUFFIX A B NON SUFFIX A B IC=2mA,VCE=5V NON SUFFIX IC=100mA,VCE=5V IC=2mA,VCE=5V A B Collector Emitter Saturation Voltage VCE(sat) IC=100mA,IB=10mA Base Emitter Saturation Voltage Base Emitter On Voltage VBE(sat) VBE(on) 50 120 180 50 100 160 460 220 460 50 60 90 IC=100mA,IB=10mA IC=2mA,VCE =5V IC=100mA,VCE =5V* 0.55 IC=50mA, VCE=5V 100 0.25 V 0.70 1.2 V V V 0.85 DYNAMICS CHARACTERISTICS Transition Frequency fT MHz f=100MHz Pulse Test : Pulse width < 300µs, Duty Cycle <2%. Continental Device India Limited Data Sheet Page 2 of 4 BC 446, A, B BC 448, A, B BC 450, A, B TO-92 Plastic Package B TO-92 Transistors on Tape and Ammo Pack Uncontrolled Ammo Pack Style A MECHANICAL DATA h h A1 LABEL Carrier Strip FLAT SIDE 8.2" W2 H0 L Wo W1 W 1 13" t1 K 2 F1 t 3 D A A F 3 2 1 C F H F PIN CONFIGURATION 1. EMITTER 2. BASE 3. COLLECTOR 1.7 7" Do Po 3 2 1 SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH A1 A T P Po FEED HOLE CENTRE TO COMPONENT CENTRE P2 DIM MIN. MAX. A B C D 4.32 4.45 3.18 0.41 5.33 5.20 4.19 0.55 DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION F h W Wo W1 E F G H 0.35 0.50 5 DEG 1.14 1.40 1.14 1.53 HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, W2 Ho H1 L Do t F2 CLINCH HEIGHT PULL - OUT FORCE H2 (P) K L 12.70 1.982 All diminsions in mm. — 2.082 Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions in mm unless specified otherwise ITEM SEC AA G F2 P2 D E Beyond 'L' Solderability Ensured (p) A H1 ED FE Adhesive Tape on Top Side P T L Dimension With 'L' TO-92 Plastic Package SPECIFICATION REMARKS MIN. NOM. MAX. TOL . 4.8 4.0 5.2 4.8 4.2 3.9 12.7 ±1 12.7 ±0.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH 6.35 ±0.4 TO BE MEASURED AT BOTTOM OF CLINCH +0.6 5.08 -0.2 1 0 AT TOP OF BODY 18 ±0.5 6 ±0.2 9 +0.7 -0.5 0.5 ±0.2 16 ±0.5 23.25 11.0 4 ±0.2 1.2 t1 0.3 - 0.6 2.54 +0.4 -0.1 3 6N NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES. Packing Detail PACKAGE TO-92 Bulk TO-92 T&A STANDARD PACK Details Net Weight/Qty 1K/polybag 200 gm/1K pcs 2K/ammo box 645 gm/2K pcs Continental Device India Limited INNER CARTON BOX Size Qty 3" x 7.5" x 7.5" 5K 12.5" x 8" x 1.8" 2K Data Sheet OUTER CARTON BOX Size Qty Gr Wt 17" x 15" x 13.5" 80K 23 kgs 17" x 15" x 13.5" 32K 12.5 kgs Page 3 of 4 Notes BC 446, A, B BC 448, A, B BC 450, A, B TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 e-mail [email protected] www.cdil.com BC446_50_A_B Rev160701 Continental Device India Limited Data Sheet Page 4 of 4