CE 1N4001G THRU 1N4007G CHENYI ELECTRONICS GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER Reverse Voltage - 50 to 1300 Volts Forward Current - 1.0Amperes FEATURES . The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 . High current capability . Low reverse leakage . Glass passivated junction . Low forward voltage drop . High temperature soldering guaranteed: 250 /10 seconds, 0.375"(9.5mm)lead length,5lbs.(2.3kg) tension MECHANICAL DATA . Case: JEDEC DO-41 molded plastic body . Terminals: Plated axial lead solderable per MIL-STD-750,method 2026 . Polarity:Color band denotes cathode end Dimensions in inches and (millimeters) . Mounting Position: Any . Weight: 0.012 ounce, 0.33 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive) load. For capacitive load,derate by 20%) 1N 1N 1N 1N 1N 1N 1N Symbols 4001G 4002G 4003G 4004G 4005G 4006G 4007G Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Macimum average forward rectified I(AV) 1.0 Amp IFSM 30.0 Amps VF 1.1 Volts current 0.375"(9.5mm)lead length at TA=75 Peak forward surge current 8.3ms half sing-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 1.0 A Maximum reverse TA=25 current at rated DC blocking voltage TA=100 5.0 IR R R Typeical thermal resistance(Note 1) A 50.0 JA 50.0 JL 25.0 CJ Typical junction Capacitance(Note 2) Operating and storage temperature range TJ /W 15.0 pF -65 to +175 TSTG Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V DC 2.Thermal resistance from juntion to ambient and from junction lead at 0.375"(9.5mm)lead length, P.C.B. Mounted Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE 1N4001G THRU 1N4007G CHENYI ELECTRONICS GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER Reverse Voltage - 50 to 1300 Volts Forward Current - 1.0Amperes RATINGS AND CHARACTERISTIC CURVES 1N4001G THRU 1N4007G FIG.2-TYPICAL INSTANTANEOUS FORWARD FLG.1-FORWARD CURRENT DERATING CURVE CHARACTERISTICS FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.5-TYPICAL JUNCTION CAPACITANCE Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2