CURRENT 1.5 Amperes VOLTAGE 50 to 1000 Volts RL151G THRU RL157G Features · The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 · High current capability · Low reverse leakage · Glass passivated junction · Low forward voltage drop · High temperature soldering guaranteed : 350℃/10 seconds, 0.375"(9.5mm) lead length, 5lbs.(2.3kg) tension DO-15 0.140(3.6) 0.104(2.6) DIA. 1.0(25.4) MIN. 0.300(7.6) 0.230(5.8) Mechanical Data · Case : JEDEC DO-15 molded plastic body · Terminals : Plated axial lead solderable per MIL-STD-750, method 2026 · Polarity : Color band denotes cathode end · Mounting Position : Any · Weight : 0.014 ounce, 0.33 gram 1.0(25.4) MIN. 0.034(0.9) 0.028(0.7) DIA. Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols RL 151G RL 152G RL 153G RL 154G RL 155G RL 156G RL 157G Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375"(9.5mm) lead length TA=75℃ I(AV) 1.5 Amps Peak forward surge current 8.3ms half sing wave superimposed on rated load (JEDEC method) IFSM 60.0 Amps Maximum instantaneous forward voltage at 1.5A VF 1.1 Volts Maximum reverse current at rated DC blocking voltage TA=25℃ TA=100℃ Typical thermal resistance (Note 2) Typical junction capacitance (Note 1) Operating and storage temperature range IR 5.0 50.0 μA RθJA 50.0 ℃/W CJ 20.0 pF TJ TSTG -50 to +175 Notes: (1) Measured at 1MHz and applied reverse voltage of 4.0V DC. (2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted ℃ RATINGS AND CHARACTERISTIC CURVES RL151G THRU RL157G FIG.1-FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.2 20 INSTANTANEOUS FORWARD CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES 1.5 0.9 0.6 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.3 0 0 25 50 75 100 125 150 175 LEAD TEMPERATURE ( ℃) 10 1 TJ=25℃ PULSE WIDTH=300mS 0.1 1% DUTY CYCLE 0.01 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.6 1.2 1.4 1.5 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 60 45 FIG.4-TYPICAL REVERSE CHARACTERISTICS 30 10 15 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS REVERSE CURRENT (mA) PEAK FORWARD SURGE CURRENT (AMPERES) 1.0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 75 JUNCTION CAPACITANCE(pF) 0.8 TJ=100℃ 1.0 0.1 TJ=25℃ 0.01 0 20 40 60 80 100 TJ=25℃ PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 1 0.1 1 10 REVERSE VOLTAGE. VOLTS 100 120 140