CE 2W005 THRU 2W10 CHENYI ELECTRONICS SINGLE PHASE GLASS BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:2.0A FEATURES Ideal for printed circuit board Surge overload rating: 60A peak High case dielectric strength MECHANICAL DATA . Terminal: Plated leads solderable per MIL-STD 202E, method 208C . Case: UL-94 Class V-0 recognized Flame Retardant Epoxy . Polarity: Polarity symbol marked on body . Mounting position: any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL 2W005 2W01 2W02 2W04 2W06 2W08 2W10 units Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 Vdc 50 100 200 400 600 800 1000 v v v Maximum DC blocking Voltage Maximum Average Forward Rectified current at Ta=25 If(av) 2.0 A Ifsm 60 A Vf 1.0 V 10.0 A Ir 1.0 mA Tj -55 to +125 Tstg -55 to +150 Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 2.0A DC Maximum DC Reverse Voltage Ta=25 at rated DC blocking voltage Ta=100 Operating Temperature Range Storage and operation Junction Temperature Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE 2W005 THRU 2W10 CHENYI ELECTRONICS SINGLE PHASE GLASS BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:2.0A RATINGS AND CHARACTERISTIC CURVES 2W005 THRU 2W10 FIG.1-MAXIMUM FORWARD SURGE CURRENT FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.3-TYPICAL REVERSE CHARACTERISTICS FIG.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2