CE DF005 THRU DF10 CHENYI ELECTRONICS SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:1.0A FEATURES Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Surge overload rating: 50A peak MECHANICAL DATA . Terminal: Plated leads solderable per MIL-STD 202E, method 208C . Case: UL-94 Class V-0 recognized Flame Retardant Epoxy . Polarity: Polarity symbol marked on body . Mounting position: any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL DF005 DF01 DF02 DF04 DF06 DF08 DF10 units Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 v Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 v Vdc 50 100 200 400 600 800 1000 v Maximum DC blocking Voltage Maximum Average Forward Rectified current at Ta=40 If(av) 1 A Ifsm 50 A Vf 1.1 V 10.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 1.0A Maximum DC Reverse Voltage Ta=25 at rated DC blocking voltage Ta=125 500 A Typical Junction Capacitance Cj 25 pF Operating Temperature Range Tj -55 to +125 Tstg -55 to +150 Storage and operation Junction Temperature Ir Note: 1. Measure at 1MHZ and applied reverse voltage of 4.0 volt Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE DF005 THRU DF10 CHENYI ELECTRONICS SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:1.0A RATINGS AND CHARACTERISTIC CURVES DF005 THRU DF10 FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2