PLA110 Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PLA110 400 150 22 Description PLA110 is a 1-Form-A solid state relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. The optically-coupled input is controlled by a highly efficient GaAIAs infrared LED. The PLA110 can be used to replace mechanical relays and offers the superior reliability associated with semiconductor devices. Because they have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or through hole package. Units V mA Ω Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Ordering Information Part # PLA110 PLA110S PLA110STR Description 6 Pin Dip (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration PLA110 Pinout PLA110 Pinout AC/DC Configuration DC Only Configuration + Control Ð Control NC 1 6 2 5 3 4 Load + Control Do Not Use Ð Control NC Load 1 6 2 5 3 4 + Load Ð Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-PLA110-R5 www.clare.com TOFF 1 PLA110 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 °C +125 °C - - +260 +220 °C °C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation 2 Conditions Symbol Min Typ Max Units - VL - - 400 V 10ms IL IL IL - - 150 250 400 mA mA mA IL=150mA IL=250mA VL=400V RON RON ILEAK - - 22 7 1 Ω Ω µA IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT - 1 0.50 - 25 - ms ms pF IL=150mA IF=5mA VR=5V IF IF VF VR IR 5 0.4 0.9 - 0.7 1.2 - 50 1.4 5 10 mA mA V V µA - CI/O VI/O 3750 3 - - pF VRMS www.clare.com Rev. 5 PLA110 PERFORMANCE DATA* Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 1.25 15 16 LED Forward Voltage Drop (V) 15 10 18 19 0 20 441.5 450.5 25 20 20 5 Device Count (N) 25 10 15 10 5 1.05 1.35 1.65 1.95 0.75 300 Load Current (mA) 20 15 10 5 0.26 0.29 0.32 10 1.05 1.35 1.65 1.95 2.25 0.12 0.17 0.35 0.32 0.37 PLA110 Typical On-Resistance vs. Temperature (Load Current = Max rated at Temp.) AC/DC Configuration 25 5mA 10mA 5mA AC/DC Configuration 150 10mA 5mA 100 50 -40 -20 0 20 40 60 10mA 20 15 10 5 0 80 100 120 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) PLA110 Typical On Resistance vs. Temp. Load Current=100mA Instantaneous PLA110 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Turn-Off (ms) PLA110 Typical On-Resistance vs. Temperature (Load Current = Max Rated at Temp.) DC Configuration 0.27 DC Configuration 200 0.38 0.22 Turn-Off (ms) PLA110 Typical Load Current vs. Temperature (N=50 Ambient Temperature = 25°C) 250 0 0 0.23 15 LED Current (mA) 25 486.5 0 2.25 LED Current (mA) PLA110 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC; IF = 5mADC) 477.5 5 0 0.75 468.5 PLA110 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC; IF = 5mADC) 20 15 459.5 Blocking Voltage (V) 25 Device Count (N) Device Count (N) 17 PLA110 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) 0 Device Count (N) 20 On-Resistance (Ω) PLA110 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC) 0.035 25 10 0.030 8 IF=10mA 7 6 20 IF=5mA Leakage (µA) IF=5mA 9 On-Resistance (Ω) On-Resistance (Ω) 25 5 On-Resistance (Ω) Device Count (N) 30 PLA110 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 35 PLA110 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) PLA110 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC 15 10 0.025 0.020 0.015 0.010 0.005 5 0 0 -40 -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 Temperature (°C) 100 120 -40 -20 0 20 40 60 80 100 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 5 www.clare.com 3 PLA110 PERFORMANCE DATA* 0.6 475 0.5 470 0.4 460 5mA 0.3 10mA 0.3 0.2 0.25 0.2 -20 0 20 40 60 80 0 100 0.1 0.05 -40 -20 0 20 40 60 80 100 120 -40 20 40 60 80 100 Temperature (°C) PLA110 Typical LED Forward Voltage Drop vs. Temperature PLA110 Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) PLA110 Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 0.40 0.12 0.10 1.4 50mA 1.2 10mA 5mA 1.0 0.30 Turn-Off (ms) Turn-On (ms) 1.6 0.25 0.20 0.15 0.08 0.06 0.04 0.10 0.02 0.05 0.8 0 0 -40 -20 0 20 40 60 80 100 120 0 5 10 15 Temperature (°C) LED Current (mA) 1.500 1.000 0.500 20 40 60 30 35 40 45 50 0 80 100 150 2.500 2.000 1.500 1.000 0.500 0 -40 10 15 20 25 30 35 40 45 50 PLA110 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC 100 50 0 -50 -100 -20 0 20 40 60 Temperature (°C) Temperature (°C) 5 Forward Current (mA) PLA110 Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 3.000 2.000 0 25 Load Current (mA) PLA110 Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) -20 20 Forward Current (mA) 2.500 -40 0 Temperature (°C) 0.35 0 -20 Temperature (°C) 1.8 3.000 IF=5mA 0.15 0.1 455 -40 LED Current (mA) PLA110 Typical Turn-Off vs. Temperature (Load Current = 100mADC) Turn-Off (ms) 465 450 LED Forward Voltage Drop (V) PLA110 Typical Turn-On vs. Temperature (Load Current = 100mADC) 480 Turn-On (ms) Blocking Voltage (VRMS) PLA110 Typical Blocking Voltage vs. Temperature 80 100 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) PLA110 Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 5 PLA110 Mechanical Dimensions 8.382 ± .635 (.330 ± .025) 6 Pin DIP Through Hole (Standard) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 6-.800 DIA. (6-.031 DIA.) 8.382 ± .635 (.330 ± .025) 6.350 ± .127 (.250 ± .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 2.540 ± .127 (.100 ± .005) 3.302 (.130) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) .457 ± .076 (.018 ± .003) 7.620 ± .254 (.300 ± .010) 2.540 ± .127 (.100 ± .005) 6.350 ± .127 (.250 ± .005) 9.144 (.360) 6 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) PC Board Pattern (Top View) 9.525 ± .254 (.375 ± .010) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .254 TYP. (.010) .457 ± .076 (.018 ± .003) 1.499 ± .127 (.059 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 6 12.090 (.476) 10.100 (.398) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 5 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PLA110-R5 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 4/3/01