LCA220 Commom Input OptoMOS® Relays Load Voltage Load Current Max RON LCA220 250 120 20 Units V mA Ω Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Description LCA220 is a common input 1- Form 2A solid state relay which has two independent optically couple MOSFETs controlled by a common input signal. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture to provide 3750 VRMS of input to output isolation. The optically coupled input is controlled by highly efficient GaAIAs infrared LEDs. Common input OptoMOS relays can replace standard dual pole relays in a variety of applications. The common input relay eliminates the need to make an external circuit connection when both poles are controlled by a common signal. Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified to: • BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 • BS EN 41003:1993 Certificate #: 7344 Ordering Information Part # LCA220 LCA220S LCA220STR Description 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1,000/Reel) Pin Configuration LCA220 Pinout NC + Control Ð Control NC 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ DS-LCA220-R6 www.clare.com +90% 10%+ TON TOFF 1 LCA220 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min - Typ Max Units - 1501 mW 100 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 °C +125 °C - - +260 °C - - +220 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance *Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation Conditions Symbol Min Typ Max Units 10ms max IL=120 mA VL=250V VL IL ILPK RON ILEAK - - 250 120 340 20 1 V mA mA W mA IF=10mA, VL=10V IF=10mA, VL=10V 50V; f=1MHz TON TOFF COUT - 50 5 5 - mS mS pF IL=120mA IF=10mA VR=5V - IF VF VR IR CI/O VI/O 10 0.8 0.9 3750 1.4 1.2 3 - 100 1.4 5 20 - mA mA V V mA pF VRMS *Input characteristics represent requirements of two parallel connected LEDs. 2 www.clare.com Rev. 6 LCA220 PERFORMANCE DATA* LCA220 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 10mADC LCA220 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 10mADC) Device Count (N) 25 20 15 10 30 25 25 20 20 15 10 5 5 0 1.19 1.21 1.23 1.25 8.25 12.5 LED Forward Voltage Drop (V) 5 12.9 20 10 Device Count (N) 25 20 15 15 10 1.56 1.80 0.50 0.60 LED Current (mA) LCA220 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 10mADC) 200 25 Load Current (mA) 20 15 10 5 0.20 0.40 0.50 0.60 10 0.80 0.90 1.6 1.0 1.7 1.8 0.70 125 100 20mA 10mA 75 -40 -20 0 20 40 60 2.0 2.1 2.2 LCA220 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) LCA220 Typical Load Current vs. Temperature 150 0.80 1.9 Turn-On (ms) 80 100 120 0.100 0.090 0.080 0.070 0.060 0.050 0.040 0.030 0.020 0.010 0 -40 -20 0 20 40 60 80 100 Turn-Off (ms) Temperature (°C) Temperature (°C) LCA220 Typical Blocking Voltage vs. Temperature LCA220 Typical Turn-On vs. Temperature (Load Current = 80mADC) LCA220 Typical Turn-Off vs. Temperature (Load Current = 80mADC) 3.0 2.5 Turn-On (ms) 340 335 330 325 320 315 310 305 -40 0.30 0.70 175 0 0 440 15 LED Current (mA) Leakage (µA) 1.32 430 0 0 1.08 420 5 5 0 410 LCA220 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 10mADC) 25 0.84 400 Blocking Voltage (V) 20 0.60 390 10.25 25 Device Count (N) Device Count (N) 12.7 LCA220 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) 5 Device Count (N) 10 On-Resistance (Ω) LCA220 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) Blocking Voltage (VRMS) 15 0 0 1.17 0.60 1.5 20mA 1.0 -20 0 20 40 60 Temperature (°C) 80 100 -40 0.40 0.30 0.20 0.10 0.5 0 0.50 10mA 2.0 Turn-Off (ms) Device Count (N) 30 Device Count (N) 35 LCA220 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) -20 0 20 40 60 Temperature (°C) 80 100 0 10mA -40 -20 0 20 40 60 80 100 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 6 www.clare.com 3 LCA220 PERFORMANCE DATA* LCA220 Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) 1.6 1.4 50mA 30mA 20mA 10mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (°C) LED Forward Current (mA) LCA220 Typical On-Resistance vs. Temperature (Load Current = max rated over temp) LCA220 Typical IF for Switch Operation vs. Temperature (Load Current = max rated over temp) 20mA 16 10mA 14 Instantaneous 12 10 0 -40 -20 0 20 40 60 80 -40 100 Temperature (°C) Load Voltage (V) 1.2 0 20 40 60 80 100 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 80 100 Temperature (°C) LCA220 Energy Rating Curve 1.0 Load Current (A) Load Current (mA) 200 150 100 50 0 -50 -100 -150 -200 -2.0 -1.5 -1.25 -0.625 0 0.625 1.25 1.875 3.0 -20 Temperature (°C) LCA220 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 10mADC LCA220 Typical IF for Switch Dropout vs. Temperature (Load Current = max rated over temp) LED Current (mA) 10mA LED Current (mA) 18 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0 5 10 15 20 25 30 35 40 45 50 55 LED Forward Current (mA) 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 20 On-Resistance (Ω) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 5 10 15 20 25 30 35 40 45 50 55 LCA220 Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) Turn-Off (ms) 1.8 Turn-On (ms) LED Forward Voltage Drop (V) LCA220 Typical LED Forward Voltage Drop vs. Temperature 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 6 LCA220 Mechanical Dimensions 9.652 ± .381 (.380 ± .015) 8 Pin DIP Through Hole (Standard) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 ± .508 (.360 ± .020) 6.350 ± .127 (.250 ± .005) 9.144 TYP. (.360) 2.540 ± .127 8-.800 DIA. (.100 ± .005) (8-.031 DIA.) .457 ± .076 (.018 ± .003) 7.620 ± .127 (.300 ± .005) 8.077 ± .127 (.318 ± .005 ) 9.652 ± .381 (.380 ± .015) 8 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.620 ± .127 (.300 ± .005) 6.350 ± .127 (.250 ± .005) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .254 TYP. (.010) .457 ± .076 (.018 ± .003) 1.498 ± .127 (.059 ± .005) 8.077 ± .127 (.318 ± .005) Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.300 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 6 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-LCA220-R6 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 1/12/01