BR805 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS BR810 TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 8.0 Amperes FEATURES * Surge overload rating: 125 Amperes peak * Low forward voltage drop BR-8/10 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202, Method 208 guaranteed Polarity: Symbols molded or marked on body Mounting position: Any Weight: 6.9 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL BR805 BR81 BR82 BR84 BR86 BR88 BR810 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage o Maximum Average Forward Rectified Output Current at Tc = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave 8.0 Amps IFSM 125 Amps VF 1.1 Volts superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 4.0A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T C = 100 oC 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range Volts IO 10 IR uAmps 500 2 I t 166 A 2 Sec CJ 200 RθJ A 21 TJ -55 to + 125 0 C -55 to + 150 0 C T STG pF 0 C/W NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads. 236 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT RATING AND CHARACTERISTIC CURVES (BR805 THRU BR810) Bo d Si at- ar He PC M g ng nti u Mo in K nt nk ou DC COMPONENTS CO., LTD. R 237 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT