RS101 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS RS107 TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * Low cost * Low leakage * Low forward voltage RS-1 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: Symbols molded or marked on body Mounting position: Any Weight: 1.26 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL RS101 RS102 RS103 RS104 RS105 RS106 RS107 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 50oC Peak Forward Surge Current, 8.3 ms single half sine-wave Volts IO 1.0 Amps I FSM 30 Amps VF 1.0 Volts superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 1.0A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 o C 2 10 500 I t Rating for Fusing (t<8.3ms) 2 I t 10 Typical Junction Capacitance ( Note1) CJ 15 RθJ A 40 Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range uAmps IR TJ T STG A 2 Sec pF 0 C/W -55 to + 125 0 -55 to + 150 0 C C NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.47 x 0.47" (12x12mm) copper pads. 194 NEXT BACK NEXT EXIT BACK RATING AND CHARACTERISTIC CURVES (RS101 THRU RS107) DC COMPONENTS CO., LTD. R 195 EXIT EXI BACK NEXT BACK EXIT NEXT BACK NEXT