HVM5 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS HVM16 TECHNICAL SPECIFICATIONS OF HIGH VOLTAGE ASSEMBLIED RECTIFIER VOLTAGE RANGE - 5000 to 16000 Volts CURRENT - 0.35 Ampere FEATURES * * * * Low cost Low leakage Isolated case Surge overload rating - 50 amperes peak HVM * Low forward voltage drop MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any MAX . MAX. MAX . MAX . MAX . MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL HVM5 HVM8 HVM10 HVM12 HVM14 HVM15 HVM16 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 5 8 10 12 14 15 16 K Volts Maximum RMS Voltage VRMS 3.5 5.6 7.0 8.4 9.8 10.5 11.2 K Volts Maximum DC Blocking Voltage VDC 5 8 10 12 14 15 16 o Maximum Average Forward Rectified Current at T A = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) 350 mAmps I FSM 50 Amps Maximum Instantaneous Forward Voltage at 0.35A DC VF Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25 o C IR 5.0 T J, T STG -20 to + 135 Operating and Storage Temperature Range K Volts IO 8.0 13.5 14.0 Volts uAmps 0 C NOTES:1. Enough heat sink must be considered in application. 2. Suffix "-Tox" (e.g.-T01,-T02,.....) for Terminal type. 154 NEXT NEXT NEXT BACK EXIT BACK EXI BACK EXIT RA TING AND CHARACTERISTIC CURVES (HVM5 THRU HVM16) DC COMPONENTS CO., LTD. R 155 NEXT NEXT BACK BACK EXIT EXIT