HER101 THRU HER108 HIGH EFFICIENCY RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Low power loss, high efficiency Low leakage Low forward voltage High current capability High speed switching High surge capability High reliability Mechanical Data DIM ENSIONS Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting Position: Any Weight: 0.012 ounce, 0.33 gram DIM inches mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols HER 101 HER 102 HER 103 HER 104 HER 105 HER 106 HER 107 HER 108 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 600 800 1000 Volts Maximum RMS voltage V RMS 35 70 140 210 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 300 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=50 I(AV) 1.0 Amp Peak forward surge current, 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A DC VF Maximum full load reverse current average, full cycle 0.375" (9.5mm) lead length at TL=55 IR(AV) 100.0 A TA=25 IR 5.0 A Maximum reverse recovery time (Note 1) T rr 50 75 nS Typical junction capacitance (Note 2) CJ 15 12 F Maximum DC reverse current at rated DC blocking voltage Operating and storage temperature range 1.0 TJ, TSTG 1.3 -65 to +150 Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts 1 1.5 1.7 Volts RATINGS AND CHARACTERISTIC CURVES 2