KBPC10,15,25,35 SERIES SINGLE-PHASE SILICON BRIDGE Reverse Voltage - 50 to 1000 Volts Forward Current - 10.0/15.0/25.0/35.0 Amperes Features Surge overload 200-400 amperes peak Low forward voltage drop Mounting position: Any Electrically isolated base-1800 volts Solderable 0.25 FASTON terminals Materials used carries U/L recognition DIMENSIONS inches DIM DIMENSIONS mm mm Max. Min. Max. A 0.432 0.442 10.97 11.23 B 1.12 1.13 28.4 28.7 17.6 C 0.410 0.490 10.4 12.4 17.1 19.1 D 1.2 - 30.5 - 0.590 13 15 E 0.672 0.752 17.1 19.1 1.0 - 25.4 Max. Min. Max. A 0.432 0.442 10.97 11.23 B 1.12 1.13 28.4 28.7 C 0.612 0.692 15.5 D 0.672 0.752 E 0.512 - F DIM Min. Min. H Note inches F 0.04(1.0) DIA Typ. G HOLE FOR NO.8 SCREW 0.193(4.9) DIA Note 0.672 H 0.752 17.1 19.1 HOLE FOR NO. 8 SCREW 0.193(4.9) DIA Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load 60Hz For capacitive load, derate current by 20%. Symbols KBPC10005 KBPC1001 KBPC1002 KBPC1004 KBPC1006 KBPC1008 KBPC1010 KBPC15005 KBPC1501 KBPC1502 KBPC1504 KBPC1506 KBPC1508 KBPC1510 KBPC25005 KBPC2501 KBPC2502 KBPC2504 KBPC2506 KBPC2508 KBPC2510 KBPC35005 KBPC3501 KBPC3502 KBPC3504 KBPC3506 KBPC3508 KBPC3510 50 100 200 400 600 800 1000 70 140 280 420 560 700 Volts KBPC35: 35.0 Amps Units Maximum repetitive peak reverse voltage VRRM Maximum RMS bridge input voltage VRMS 35 Maximum average forward rectified output current at TC=55 I(AV) KBPC10: 10.0 Peak forward surge current, 8.3mS single half sine-wave superimposed on rated load IFSM Maximum forward Voltage drop per element at 5.0/7.5/12.5/17.5A peak VF 1.2 Volts Maximum DC reverse current at rated DC blocking voltage per element TA=25 IR 10.0 A TJ -55 to +125 TSTG -55 to +150 Operating temperature range Storage temperature range KBPC15: 15.0 KBPC10: 200.0 KBPC15: 300.0 Note: (1) Also available on KBPC10W / 15W / 25W / 35W series 1 KBPC25: 25.0 KBPC25: 300.0 KBPC35: 400.0 Volts Amps RATINGS AND CHARACTERISTIC CURVES 2