KBPC6005 THRU KBPC610 SINGLE-PHASE SILICON BRIDGE Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes Features Surge overload rating - 125 amperes peak Low forward voltage drop Small size; simple installation Silver plated copper leads Mounting position: Any DIM ENSIONS DIM inches mm Min. Max. Min. Max. A 0.580 0.620 14.69 15.71 B 0.230 0.270 5.84 6.86 C 0.405 0.445 10.29 11.31 E 0.750 - 19.1 - F 0.038 0.042 0.97 1.07 G Note HOLE FOR NO. 6 SCREW Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols KBPC 6005 KBPC 601 KBPC 602 KBPC 604 KBPC 606 KBPC 608 KBPC 610 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 Volts I(AV) 6.0 6.0 Amps Peak forward surge current, 8.3mS single half sine-wave superimposed on rated load IFSM 125.0 Amps Maximum forward Voltage drop per element at 3.0A peak VF 1.0 Volt IR 10.0 1.0 uA mA TJ -55 to +125 TSTG -55 to +150 Maximum average forward rectified output current at TC=100 TA=50 Maximum DC reverse current at rated DC blocking voltage per element Operating temperature range Storage temperature range * ** TA=25 TA=100 Notes: * Unit mounted on metal chassis ** Unit mounted on P.C. board 1 RATINGS AND CHARACTERISTIC CURVES 2