R1200F THRU R2000F HIGH VOLTAGE FAST RECOVERY RECTIFIER Reverse Voltage - 1200 to 2000 Volts Forward Current - 0.2 to 0.5 Ampere Features Fast switching Low leakage High current capability High surge capability High reliability Mechanical Data DIM ENSIONS Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting Position: Any Weight: 0.012 ounce, 0.335 gram inches DIM mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols R1200F R1500F R1800F R2000F Units Maximum repetitive peak reverse voltage VRRM 1200 1500 1800 2000 Volts Maximum RMS voltage VRMS 840 1050 1260 1400 Volts Maximum DC blocking voltage VDC 1200 1500 1800 2000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=50 I(AV) 200 mAmps Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM Maximum instantaneous forward voltage at 0.5/0.2A DC VF Maximum full load reverse current average, full cycle 0.375" (9.5mm) lead length at TA=55 500 30.0 2.5 Amps 4.0 Volts IR(AV) 100.0 A IR 5.0 A Maximum reverse recovery time (Note 1) Trr 500.0 Operating and storage temperature range TJ, TSTG -65 to +175 Maximum DC reverse current at rated DC blocking voltage TA=25 Note: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A 1 nS Note RATINGS AND CHARACTERISTIC CURVES 2