HAMAMATSU C4710-52

HIGH VOLTAGE
POWER SUPPLY UNIT
C4710 SERIES
The C4710 series are PC-board mountable high voltage supplies for photomultiplier tubes. The series has six standard versions.
FEATURES
Compact and Lightweight
High Stability
High Output Power
Complete Fail-safe Functions
Six-plane Metal Shielded
TACCF0113
SPECIFICATIONS
Parameter
C4710
+15 ± 1
95
260
C4710-01
+12 ± 1
120
340
C4710 Series
C4710-02 C4710-50
+24 ± 1
+15 ± 1
65
95
145
260
C4710-51
+12 ± 1
120
340
Unit
C4710-52
Vdc
+24 ± 1
65
mA (Typ.)
145
Input Voltage
Input Current at Maximum with no load
Output Voltage
with full load
Specification Guaranteed
-240 to -1500
+240 to +1500
Output Voltage Range
1
Output Current
Input Regulation against ± 1V Input Change
±0.015
±0.015
±0.02
±0.02
±0.015
±0.01
Load Regulation against 0 to 100%
±0.01
±0.015
±0.01
±0.01
±0.01
±0.01
Load Change
0.005
Ripple / Noise (p-p)
By external controlling voltage (+0.8 to +5 V) or external potentiometer (10 k )
Output Voltage Controlling Modes
40
56
Controlling Voltage Input Impedance
±(Controlling voltage 300) ± 0.5%
Output Voltage Setting
100
Output Voltage Rise Time (0 100%)
±0.01
Temperature Coefficient
+5 to +40
Operating Temperature Range
-10 to +60
Storage Temperature Range
65 27.5 45
Dimensions (W H D)
105
Weight
Units protected against reversed power input, reversed/excessive controlling
Protective Functions
voltage input, continuous overloading/short circuit in output
Vdc
mA (Max.)
% (Typ.)
% (Typ.)
% (Typ.)
–
k (Typ.)
V
ms (Typ.)
%/ (Typ.)
mm
g
–
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
lnformation furnished by HAMAMATS U is believed to be reliabIe. However, no responsibility is assumed for possibIe inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1995 Hamamatsu Photonics K.K.
HIGH VOLTAGE POWER SUPPLY UNIT C4710 SERIES
Figure 1: Output Voltage Controlling
BY EXTERNAL VOLTAGE
BY EXTERNAL POTENTIOMETER
+12/15/24 Vdc
+12/15/24 Vdc
0 to +5 V*
CW
NO
CONNECTION
10 k
MIN. MAX.
LOAD
LOAD
* The ripple/noise in the external controlling voltage should
be minimized as it directly affects the output voltage.
TACCC0052EB
Figure 2: Output Voltage Controlling Characteristics
(C4710, -01, -02)
-1800
Figure 3: Example of Ripple / Noise Reduction Circuit
(C4710-50, -51, -52)
TACCB0009EB
+1800
1 mH
1 to 10 mH
+1500
-1200
+1200
-900
+900
-600
+600
-300
+300
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
+12/15/24 Vdc
-1500
100 F
(35 V)
C4710
SERIES
+
100 F
(35 V)
+
HV OUTPUT
0.47 to 1
(2 kV)
F
GND
GND
*The ripple/noise can be reduced to approx.1/10
by adding a choke coil and capacitor as illustrated above.
TACCC0053EB
0
0 0.43 +1
+2
+3
+4
+5 5.3
0
+6
CONTROLLING VOLTAGE
Figure 4: Dimensional outline (Unit: mm)
65
55
8
1
3
HV ADJ
4
V REF OUT
HV OUT
5
45
COMMON
35
+12/15/24 Vdc IN
2
10
1
5
45
25
27.5
2-MOUNTING THREADS (M2.3)
(SIDE VIEW)
(BOTTOM VIEW)
TACCA0124EA
HAMAMATSU PHOTONICS K.K., Electoron Tube Center
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limted: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384
North Europe: Hamamatsu Photonics Norden AB: Fäaröagatan 7, S-164-40 Kista Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95
TACC1003E04
Italy: Hamamatsu Photonics Italia: S.R.L.: Via Della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)2-935 81 733, Fax: (39)2-935 81 741
MAR. 1995 E
Printed in Japan