HITACHI HD74ALVC2G07

HD74ALVC2G07
Triple Buffers / Drivers with Open Drain
ADE-205-633A (Z)
Rev. 1
August. 2001
Description
The HD74ALVC2G07 has triple buffers / drivers with open drain outputs in a 8 pin package. Low voltage
and high speed operation is suitable for the battery powered products (e.g., notebook computers), and the
low power consumption extends the battery life.
Features
• The basic gate function is lined up as hitachi uni logic series.
• Supplied on emboss taping for high speed automatic mounting.
• Supply voltage range : 1.2 to 3.6 V
Operating temperature range : −40 to +85°C
• All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V)
All outputs VO (Max.) = 3.6 V (@VCC = 0 V)
• Output current
2 mA (@VCC = 1.2 V)
4 mA (@VCC = 1.4 V to 1.6 V)
6 mA (@VCC = 1.65 V to 1.95 V)
18 mA (@VCC = 2.3 V to 2.7 V)
24 mA (@VCC = 3.0 V to 3.6 V)
• Package type
Package type
Package code
Package suffix
Taping code
SSOP-8 pin
TTP-8DB
US
E (3,000 pcs / Reel)
HD74ALVC2G07
Outline and Article Indication
• HD74ALVC2G07
Index band
Lot No.
Y M W
A 0 7
SSOP-8
Type No.
Function Table
Input A
Output Y
L
L
H
Z
H:
L:
Z:
High level
Low level
High impedance
Rev.1, Aug. 2001, page 2 of 10
Y : Year code
(the last digit of year)
M : Month code
W : Week code
HD74ALVC2G07
Pin Arrangement
1A
1
8
VCC
3Y
2
7
1Y
2A
3
6
3A
GND
4
5
2Y
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
VCC
−0.5 to 4.6
V
VI
−0.5 to 4.6
V
VO
−0.5 to VCC+0.5
V
Input voltage range
*1
Output voltage range
*1, 2
−0.5 to 4.6
Conditions
Output : L or Z
VCC : OFF
Input clamp current
IIK
−50
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±50
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±100
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
−65 to 150
°C
Notes:
The absolute maximum ratings are values which must not individually be exceeded, and
furthermore, no two of which may be realized at the same time.
3. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
3. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.1, Aug. 2001, page 3 of 10
HD74ALVC2G07
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
1.2
3.6
V
Input voltage range
VI
0
3.6
V
Output voltage range
VO
0
VCC
V
Output current
IOL

2
mA

4
VCC = 1.4 V

6
VCC = 1.65 V

18
VCC = 2.3 V

24
VCC = 3.0 V
0
20
0
10
−40
85
Input transition rise or fall rate
Operating free-air temperature
∆t / ∆v
Ta
Note: Unused or floating inputs must be held high or low.
Rev.1, Aug. 2001, page 4 of 10
ns / V
Conditions
VCC = 1.2 V
VCC = 1.2 to 2.7 V
VCC = 3.3±0.3 V
°C
HD74ALVC2G07
Electrical Characteristics
(Ta = −40 to 85°C)
Item
Symbol
VCC (V)
Input voltage
VIH
1.2
VIL
Output voltage
VOL
*
Min
Typ
Max
Unit
VCC×0.75 

V
1.4 to 1.6
VCC×0.7


1.65 to 1.95
VCC×0.7


2.3 to 2.7
1.7


3.0 to 3.6
2.0


1.2


VCC×0.25
1.4 to 1.6


VCC×0.3
1.65 to 1.95


VCC×0.3
2.3 to 2.7


0.7
3.0 to 3.6


0.8
Min to Max


0.2
1.2


0.3
IOL = 2 mA
1.4


0.3
IOL = 4 mA
1.65


0.3
IOL = 6 mA
2.3


0.55
IOL = 18 mA
3.0


0.55
IOL = 24 mA
V
Test conditions
IOL = 100 µA
Input current
IIN
3.6


±5
µA
VIN = 3.6 V or GND
Off state output
current
IOZ
3.6


±5
µA
VOUT = VCC or GND
Quiescent supply
current
ICC
3.6


10
µA
VIN = VCC or GND,
IO = 0
Output leakage
current
IOFF
0


5
µA
VIN or VO =
0 to 3.6 V
Input capacitance
CIN
3.3

5.0

pF
VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Rev.1, Aug. 2001, page 5 of 10
HD74ALVC2G07
Switching Characteristics
(Ta = −40 to 85°C)
•
VCC = 1.2 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tLZ
tZL

5.5

ns
CL = 15 pF
A
Y
•
VCC = 1.5±0.1 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tLZ
tZL
1.0

7.0
ns
CL = 15 pF
A
Y
•
VCC = 1.8±0.15 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tLZ
tZL
1.0

5.0
ns
CL = 30 pF
A
Y
•
VCC = 2.5±0.2 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tLZ
tZL
0.5

3.5
ns
CL = 30 pF
A
Y
•
VCC = 3.3±0.3 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tLZ
tZL
0.5

2.5
ns
CL = 30 pF
A
Y
Rev.1, Aug. 2001, page 6 of 10
HD74ALVC2G07
Operating Characteristics
(Ta = 25°C)
Item
Symbol
VCC (V)
Min
Typ
Max
Unit
Test conditions
Power dissipation
CPD
1.5

2.0

pF
f = 10 MHz
1.8

2.0

2.5

2.5

3.3

3.5

capacitance
Test Circuit
*1
VCC
VCC × 2 or 6.0 V
RL
Pulse
Generator
Input
Output
Z out = 50 Ω
CL
Symbol
RL
V CC = 1.2 V,
V = 1.8±0.15 V V CC = 2.5±0.2 V V CC = 3.3±0.3 V
1.5±0.1 V CC
RL
2.0 kΩ
1.0 kΩ
500 Ω
500 Ω
CL
15 pF
30 pF
30 pF
30 pF
*1
VCC × 2
VCC × 2
VCC × 2
6.0 V
Note: CL includes probe and jig capacitance.
Rev.1, Aug. 2001, page 7 of 10
HD74ALVC2G07
Waveforms
tf
tr
90%
90%
V ref
V ref
Input
VIH
10%
10%
GND
t LZ
t ZL
VOH
V ref
Output
VL
Symbol
V CC = 1.2 V,
V CC = 1.8±0.15 V V CC = 2.5±0.2 V
1.5±0.1 V
VOL
V CC = 3.3±0.3 V
tr / t f
2.0 ns
2.0 ns
2.5 ns
2.5 ns
V IH
VCC
VCC
VCC
2.7 V
V ref
50%
50%
50%
1.5 V
VL
VL = VOL+0.1 V
VL = VOL+0.15 V VL = VOL+0.15 V VL = VOL+0.3 V
Note: Input waveform : PRR = 10 MHz, duty cycle 50%
Rev.1, Aug. 2001, page 8 of 10
HD74ALVC2G07
Package Dimensions
As of January, 2001
(0.4)
1.50
0.5 0.5 0.5
Unit: mm
+ 0.05
0.13 − 0.03
3.1 ± 0.1
(0.4)
2.3 ± 0.1
0 − 0.1
+ 0.05
8 − 0.2 − 0.04
0.7 ± 0.1
(0.17)
2.0 ± 0.1
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
TTP-8DB


0.25 g
Rev.1, Aug. 2001, page 9 of 10
HD74ALVC2G07
Disclaimer
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Sales Offices
Hitachi, Ltd.
Semiconductor & Integrated Circuits
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
Europe
Asia
Japan
:
:
:
:
http://semiconductor.hitachi.com/
http://www.hitachi-eu.com/hel/ecg
http://sicapac.hitachi-asia.com
http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe Ltd.
Electronic Components Group
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585200
Hitachi Europe GmbH
Electronic Components Group
Dornacher Straße 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Asia Ltd.
Hitachi Tower
16 Collyer Quay #20-00
Singapore 049318
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://www.hitachi.com.sg
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road
Hung-Kuo Building
Taipei (105), Taiwan
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower
World Finance Centre,
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon
Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://semiconductor.hitachi.com.hk
Copyright © Hitachi, Ltd., 2001. All rights reserved. Printed in Japan.
Colophon 4.0
Rev.1, Aug. 2001, page 10 of 10
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.