HD74LV1G14A Inverter with Schmitt–trigger Input ADE-205-320C (Z) 4th. Edition April 2001 Description The HD74LV1G14A has an inverter with schmitt–trigger input in a 5 pin package. Low voltage and high speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features • The basic gate function is lined up as hitachi uni logic series. • Supplied on emboss taping for high speed automatic mounting. • Electrical characteristics equivalent to the HD74LV14A Supply voltage range : 1.65 to 5.5 V Operating temperature range : –40 to +85°C • All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) • Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V) • All the logical input has hysteresis voltage for the slow transition. HD74LV1G14A Outline and Article Indication • HD74LV1G14A Index band Marking L A = Control code ( or blank) CMPAK–5 • HD74LV1G14A Marking L VSON-5 2 A = Control code HD74LV1G14A Function Table Input A Output Y H L L H H : High level L : Low level Pin Arrangement NC 1 IN A 2 GND 3 5 VCC 4 OUT Y (Top view) 3 HD74LV1G14A Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Symbol Ratings Unit VCC –0.5 to 7.0 V VI –0.5 to 7.0 V VO –0.5 to VCC + 0.5 V –0.5 to 7.0 Test Conditions Output : H or L VCC : OFF Input clamp current I IK –20 mA VI < 0 Output clamp current I OK ±50 mA VO < 0 or VO > VCC Continuous output current IO ±25 mA VO = 0 to VCC Continuous current through VCC or GND I CC or IGND ±50 mA Maximum power dissipation at Ta = 25°C (in still air) *3 PT 200 mW Storage temperature Tstg –65 to 150 °C Notes: The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Recommended Operating Conditions Item Symbol Min Max Unit Supply voltage range VCC 1.65 5.5 V Input voltage range VI 0 5.5 V Output voltage range VO 0 VCC V Output current I OL — 1 mA — 2 VCC = 2.3 to 2.7 V — 6 VCC = 3.0 to 3.6 V — 12 VCC = 4.5 to 5.5 V — –1 VCC = 1.65 to 1.95 V — –2 VCC = 2.3 to 2.7 V — –6 VCC = 3.0 to 3.6 V — –12 VCC = 4.5 to 5.5 V –40 85 I OH Operating free-air temperature Ta Note: Unused or floating inputs must be held high or low. 4 °C Conditions VCC = 1.65 to 1.95 V HD74LV1G14A Electrical Characteristic • Ta = –40 to 85°C Item Threshold Symbol VCC (V) * VT + voltage VT – ∆V T Output voltage VOH VOL Min Typ Max Unit 1.65 to 1.95 — — VCC×0.75 V 2.5 — — 1.75 3.3 — — 2.31 5.0 — — 3.50 Test condition 1.65 to 1.95 VCC×0.25 — — 2.5 0.75 — — 3.3 0.99 — — 5.0 1.5 — — 1.65 to 1.95 0.1 — VCC×0.4 2.5 0.25 — 1.0 3.3 0.33 — 1.32 5.0 0.5 — 2.0 Min to Max VCC–0.1 — — 1.65 1.4 — — I OH = –1 mA 2.3 2.0 — — I OH = –2 mA 3.0 2.48 — — I OH = –6 mA 4.5 3.8 — — I OH = –12 mA Min to Max — — 0.1 I OL = 50 µA 1.65 — — 0.3 I OL = 1 mA 2.3 — — 0.4 I OL = 2 mA 3.0 — — 0.44 I OL = 6 mA 4.5 — — 0.55 I OL = 12 mA V I OH = –50 µA Input current I IN 0 to 5.5 — — ±1 µA VIN = 5.5 V or GND Quiescent supply current I CC 5.5 — — 10 µA VIN = VCC or GND, IO = 0 Output leakage current I OFF 0 — — 5 µA VIN or VO = 0 to 5.5 V 3.3 — 3.0 — pF VIN = VCC or GND Input capacitance CIN Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. 5 HD74LV1G14A Switching Characteristics • VCC = 1.8 ± 0.15 V Item Symbol Ta = 25°C Ta = –40 to 85°C Min Typ Max Min Max Propagation t PLH — 16.8 32.0 1.0 34.0 delay time t PHL — 23.8 43.0 1.0 46.0 Unit Test ns FROM TO Conditions (Input) (Output) CL = 15 pF A Y FROM TO CL = 50 pF • VCC = 2.5 ± 0.2 V Item Symbol Ta = 25°C Ta = –40 to 85°C Min Typ Max Min Max Propagation t PLH — 10.5 19.7 1.0 22.0 delay time t PHL — 14.0 24.0 1.0 27.0 Unit Test ns Conditions (Input) (Output) CL = 15 pF A Y FROM TO CL = 50 pF • VCC = 3.3 ± 0.3 V Item Symbol Ta = 25°C Ta = –40 to 85°C Min Typ Max Min Max Propagation t PLH — 8.3 12.8 1.0 15.0 delay time t PHL — 10.8 16.3 1.0 18.5 Unit Test ns Conditions (Input) (Output) CL = 15 pF A Y FROM TO CL = 50 pF • VCC = 5.0 ± 0.5 V Item Symbol Ta = 25°C Ta = –40 to 85°C Min Typ Max Min Max Propagation t PLH — 5.5 8.6 1.0 10.0 delay time t PHL — 7.0 10.6 1.0 12.0 Unit Test ns Conditions (Input) (Output) CL = 15 pF Y A CL = 50 pF Operating Characteristics • CL = 50 pF Item Power dissipation capacitance 6 Symbol CPD VCC (V) Ta = 25°C Min Typ Max 3.3 — 8.5 — 5.0 — 10.0 — Unit Test Conditions pF f = 10 MHz HD74LV1G14A Test Circuit VCC Output Input Pulse generator 50 Ω CL Note: CL includes probe and jig capacitance. • Waveforms tr tf 90% Input VCC 90% 50% 50% 10% 10% GND VOH 50% Output 50% VOL t PHL t PLH Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. 2. The output are measured one at a time with one transition per measurement. 7 HD74LV1G14A Package Dimensions As of January, 2001 (0.65) + 0.1 0.15– 0.05 1.25 ± 0.1 (0.65) 0 – 0.1 (0.2) 2.0 ± 0.2 0.9 ± 0.1 (0.425) 5 – 0.2 ± 0.05 2.1 ± 0.3 1.3 ± 0.2 (0.425) Unit: mm Hitachi Code JEDEC EIAJ Mass (reference value) CMPAK-5 — Conforms 0.006 g As of January, 2001 Unit: mm 0.12 ± 0.05 1.60 ± 0.05 0.50 1.20 ± 0.05 0.50 5 — 0.2 ± 0.05 0.55 ± 0.05 1.6 ± 0.05 Hitachi Code JEDEC EIAJ Mass (reference value) 8 TNP-5D HD74LV1G14A Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Europe GmbH Electronic Components Group Dornacher Straße 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://semiconductor.hitachi.com.hk Copyright © Hitachi, Ltd., 2001. All rights reserved. Printed in Japan. Colophon 3.0 9