TI XIO3130ZHC

XIO3130
XIO3130
Data Manual
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Literature Number: SLLS693F
May 2007 – Revised January 2010
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Contents
1
2
3
4
2
Features ........................................................................................................................... 11
Introduction ...................................................................................................................... 12
................................................................................................................. 12
....................................................................................................... 12
2.3
Document Conventions ................................................................................................... 13
2.4
Ordering Information ...................................................................................................... 13
2.5
Terminal Assignments .................................................................................................... 14
2.6
Terminal Descriptions ..................................................................................................... 17
Description ....................................................................................................................... 22
3.1
Power-Up/Power-Down Sequencing .................................................................................... 22
3.1.1
Power-Up Sequence ........................................................................................... 22
3.1.2
Power-Down Sequence ........................................................................................ 23
3.2
Express Interface .......................................................................................................... 23
3.2.1
External Reference Clock ..................................................................................... 23
3.2.2
Clock Generator ................................................................................................ 23
3.2.3
Beacon ........................................................................................................... 24
3.2.4
WAKE ............................................................................................................ 24
3.2.5
Initial Flow Control Credits .................................................................................... 24
3.2.6
PCI Express Message Transactions ......................................................................... 24
3.3
GPIO Terminals ............................................................................................................ 25
3.4
Serial EEPROM ............................................................................................................ 25
3.4.1
Serial Bus Interface Implementation ......................................................................... 25
3.4.2
Serial Bus Interface Protocol .................................................................................. 26
3.4.3
Serial Bus EEPROM Application ............................................................................. 28
3.4.4
Accessing Serial Bus Devices Through Software .......................................................... 31
3.5
Switch Reset Features .................................................................................................... 31
XIO3130 Configuration Register Space ................................................................................. 33
4.1
PCI Configuration Register Space Overview .......................................................................... 33
4.2
PCI Express Upstream Port Registers ................................................................................. 34
4.2.1
PCI Configuration Space (Upstream Port) Register Map ................................................. 35
4.2.2
Vendor ID Register ............................................................................................. 36
4.2.3
Device ID Register ............................................................................................. 36
4.2.4
Command Registers ........................................................................................... 36
4.2.5
Status Register .................................................................................................. 37
4.2.6
Class Code and Revision ID Register ....................................................................... 39
4.2.7
Cache Line Size Register ..................................................................................... 39
4.2.8
Primary Latency Timer Register .............................................................................. 39
4.2.9
Header Type Register .......................................................................................... 40
4.2.10 BIST Register ................................................................................................... 40
4.2.11 Primary Bus Number ........................................................................................... 40
4.2.12 Secondary Bus Number ....................................................................................... 40
4.2.13 Subordinate Bus Number ...................................................................................... 41
4.2.14 Secondary Latency Timer Register .......................................................................... 41
4.2.15 I/O Base Register ............................................................................................... 41
4.2.16 I/O Limit Register ............................................................................................... 42
2.1
Description
2.2
Related Documents
Contents
Copyright © 2007–2010, Texas Instruments Incorporated
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
....................................................................................
.........................................................................................
Memory Limit Register .........................................................................................
Pre-fetchable Memory Base Register ........................................................................
Pre-Fetchable Memory Limit Register .......................................................................
Pre-Fetchable Base Upper 32 Bits Register ................................................................
Pre-fetchable Limit Upper 32 Bits Register .................................................................
I/O Base Upper 16 Bits Register .............................................................................
I/O Limit Upper 16 Bits Register ..............................................................................
Capabilities Pointer Register ..................................................................................
Interrupt Line Register .........................................................................................
Interrupt Pin Register ..........................................................................................
Bridge Control Register ........................................................................................
Capability ID Register ..........................................................................................
Next-Item Pointer Register ....................................................................................
Power Management Capabilities Register ..................................................................
Power Management Control/Status Register ...............................................................
Power Management Bridge Support Extension Register ..................................................
Power Management Data Register ...........................................................................
MSI Capability ID Register ....................................................................................
Next-Item Pointer Register ....................................................................................
MSI Message Control Register ...............................................................................
MSI Message Address Register ..............................................................................
MSI Message Upper Address Register ......................................................................
MSI Message Data Register ..................................................................................
Capability ID Register ..........................................................................................
Next-Item Pointer Register ....................................................................................
Subsystem Vendor ID Register ...............................................................................
Subsystem ID Register ........................................................................................
PCI Express Capability ID Register ..........................................................................
Next-Item Pointer Register ....................................................................................
PCI Express Capabilities Register ...........................................................................
Device Capabilities Register ..................................................................................
Device Control Register .......................................................................................
Device Status Register .........................................................................................
Link Capabilities Register ......................................................................................
Link Control Register ...........................................................................................
Link Status Register ............................................................................................
Serial Bus Data Register ......................................................................................
Serial Bus Index Register .....................................................................................
Serial Bus Slave Address Register ...........................................................................
Serial Bus Control and Status Register ......................................................................
Upstream Port Link PM Latency Register ...................................................................
Global Chip Control Register ..................................................................................
GPIO A Control Register ......................................................................................
4.2.17
Secondary Status Register
42
4.2.18
Memory Base Register
43
4.2.19
4.2.20
4.2.21
4.2.22
4.2.23
4.2.24
4.2.25
4.2.26
4.2.27
4.2.28
4.2.29
4.2.30
4.2.31
4.2.32
4.2.33
4.2.34
4.2.35
4.2.36
4.2.37
4.2.38
4.2.39
4.2.40
4.2.41
4.2.42
4.2.43
4.2.44
4.2.45
4.2.46
4.2.47
4.2.48
4.2.49
4.2.50
4.2.51
4.2.52
4.2.53
4.2.54
4.2.55
4.2.56
4.2.57
4.2.58
4.2.59
4.2.60
4.2.61
Copyright © 2007–2010, Texas Instruments Incorporated
Contents
43
43
44
44
45
45
45
46
46
46
46
48
48
48
49
50
50
50
50
51
51
52
52
52
53
53
53
53
54
54
54
55
56
57
58
59
59
59
60
60
61
63
64
3
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.3
4
www.ti.com
......................................................................................
......................................................................................
4.2.64 GPIO D Control Register ......................................................................................
4.2.65 GPIO Data Register ............................................................................................
4.2.66 TI Proprietary Register .........................................................................................
4.2.67 TI Proprietary Register .........................................................................................
4.2.68 TI Proprietary Register .........................................................................................
4.2.69 TI Proprietary Register .........................................................................................
4.2.70 TI Proprietary Register .........................................................................................
4.2.71 TI Proprietary Register .........................................................................................
4.2.72 Subsystem Access Register ..................................................................................
4.2.73 General Control Register ......................................................................................
4.2.74 Downstream Ports Link PM Latency Register ..............................................................
4.2.75 Global Switch Control Register ...............................................................................
4.2.76 Advanced Error Reporting Capability ID Register ..........................................................
4.2.77 Next Capability Offset/Capability Version Register ........................................................
4.2.78 Uncorrectable Error Status Register .........................................................................
4.2.79 Uncorrectable Error Mask Register ..........................................................................
4.2.80 Uncorrectable Error Severity Register .......................................................................
4.2.81 Correctable Error Status Register ............................................................................
4.2.82 Correctable Error Mask Register .............................................................................
4.2.83 Advanced Error Capabilities and Control Register .........................................................
4.2.84 Header Log Register ...........................................................................................
PCI Express Downstream Port Registers ..............................................................................
4.3.1
PCI Configuration Space (Downstream Port) Register Map ..............................................
4.3.2
Vendor ID Register .............................................................................................
4.3.3
Device ID Register .............................................................................................
4.3.4
Command Register .............................................................................................
4.3.5
Status Register ..................................................................................................
4.3.6
Class Code and Revision ID Register .......................................................................
4.3.7
Cache Line Size Register .....................................................................................
4.3.8
Primary Latency Timer Register ..............................................................................
4.3.9
Header Type Register ..........................................................................................
4.3.10 BIST Register ...................................................................................................
4.3.11 Primary Bus Number ...........................................................................................
4.3.12 Secondary Bus Number .......................................................................................
4.3.13 Subordinate Bus Number ......................................................................................
4.3.14 Secondary Latency Timer Register ..........................................................................
4.3.15 I/O Base Register ...............................................................................................
4.3.16 I/O Limit Register ...............................................................................................
4.3.17 Secondary Status Register ....................................................................................
4.3.18 Memory Base Register .........................................................................................
4.3.19 Memory Limit Register .........................................................................................
4.3.20 Pre-fetchable Memory Base Register ........................................................................
4.3.21 Pre-fetchable Memory Limit Register ........................................................................
4.2.62
GPIO B Control Register
66
4.2.63
GPIO C Control Register
68
Contents
70
72
75
75
75
76
76
76
77
77
78
79
80
80
80
81
82
83
84
85
86
87
87
88
88
88
89
90
91
91
91
91
92
92
92
92
93
93
93
94
95
95
95
Copyright © 2007–2010, Texas Instruments Incorporated
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
................................................................. 96
................................................................. 96
I/O Base Upper 16 Bits Register ............................................................................. 97
I/O Limit Upper 16 Bits Register .............................................................................. 97
Capabilities Pointer Register .................................................................................. 97
Interrupt Line Register ......................................................................................... 98
Interrupt Pin Register .......................................................................................... 98
Bridge Control Register ........................................................................................ 98
Capability ID Register ........................................................................................ 100
Next-Item Pointer Register ................................................................................... 100
Power Management Capabilities Register ................................................................. 100
Power Management Control/Status Register .............................................................. 101
Power Management Bridge Support Extension Register ................................................ 102
Power Management Data Register ......................................................................... 102
MSI Capability ID Register ................................................................................... 102
Next-Item Pointer Register ................................................................................... 102
MSI Message Control Register .............................................................................. 103
MSI Message Address Register ............................................................................ 103
MSI Message Upper Address Register .................................................................... 104
MSI Message Data Register ................................................................................. 104
Capability ID Register ........................................................................................ 104
Next-Item Pointer Register ................................................................................... 106
Subsystem Vendor ID Register ............................................................................. 106
Subsystem ID Register ....................................................................................... 106
PCI Express Capability ID Register ......................................................................... 106
Next-Item Pointer Register ................................................................................... 107
PCI Express Capabilities Register .......................................................................... 107
Device Capabilities Register ................................................................................. 107
Device Control Register ...................................................................................... 108
Device Status Register ....................................................................................... 109
Link Capabilities Register .................................................................................... 110
Link Control Register ......................................................................................... 111
Link Status Register .......................................................................................... 112
Slot Capabilities Register .................................................................................... 112
Slot Control Register .......................................................................................... 114
Slot Status Register ........................................................................................... 116
TI Proprietary Register ....................................................................................... 117
TI Proprietary Register ....................................................................................... 117
TI Proprietary Register ....................................................................................... 118
General Control Register ..................................................................................... 118
L0s Idle Timeout Register .................................................................................... 120
General Slot Info Register ................................................................................... 120
Advanced Error Reporting Capabilities ID Register ...................................................... 121
Next Capability Offset/Capability Version Register ....................................................... 121
Uncorrectable Error Status Register ........................................................................ 121
4.3.22
Pre-fetchable Base Upper 32 Bits Register
4.3.23
Pre-fetchable Limit Upper 32 Bits Register
4.3.24
4.3.25
4.3.26
4.3.27
4.3.28
4.3.29
4.3.30
4.3.31
4.3.32
4.3.33
4.3.34
4.3.35
4.3.36
4.3.37
4.3.38
4.3.39
4.3.40
4.3.41
4.3.42
4.3.43
4.3.44
4.3.45
4.3.46
4.3.47
4.3.48
4.3.49
4.3.50
4.3.51
4.3.52
4.3.53
4.3.54
4.3.55
4.3.56
4.3.57
4.3.58
4.3.59
4.3.60
4.3.61
4.3.62
4.3.63
4.3.64
4.3.65
4.3.66
Copyright © 2007–2010, Texas Instruments Incorporated
Contents
5
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
5
6
6
www.ti.com
......................................................................... 122
...................................................................... 123
4.3.69 Correctable Error Status Register ........................................................................... 124
4.3.70 Correctable Error Mask Register ............................................................................ 125
4.3.71 Advanced Error Capabilities and Control Register ....................................................... 126
4.3.72 Header Log Register .......................................................................................... 126
PCI Hot Plug Implementation Overview .............................................................................. 128
5.1
PCI Hot Plug Architecture Overview .................................................................................. 128
5.2
PCI Hot Plug Timing ..................................................................................................... 130
5.2.1
Power-Up Cycle ............................................................................................... 130
5.2.1.1
NonPCI Hot Plug Power-Up Cycle ............................................................. 130
5.2.1.2
PCI Hot Plug Power-Up Cycle With PWRGDn Feedback .................................. 130
5.2.1.3
PCI Hot Plug Power-Up Cycle With No PWRGDn Feedback .............................. 130
5.2.2
Power-Down Cycles .......................................................................................... 131
5.2.2.1
Normal Power-Down ............................................................................. 131
5.2.2.2
Surprise Removal ................................................................................ 131
5.2.2.3
PWRGDn De-Assertion .......................................................................... 132
5.2.3
PMI_Turn_Off and PME_To_Ack Messages .............................................................. 132
5.2.4
Debounce Circuits ............................................................................................ 133
5.2.5
HP_INTX Pin .................................................................................................. 133
Electrical Characteristics .................................................................................................. 134
6.1
Absolute Maximum Ratings ............................................................................................. 134
6.2
Recommended Operating Conditions ................................................................................. 134
6.3
PCI Express Differential Transmitter Output Ranges ............................................................... 135
6.4
PCI Express Differential Receiver Input Ranges .................................................................... 136
6.5
PCI Express Differential Reference Clock Input Ranges ........................................................... 137
6.6
PCI Express Reference Clock Output Requirements ............................................................... 138
6.7
3.3-V I/O Electrical Characteristics .................................................................................... 139
6.8
POWER CONSUMPTION .............................................................................................. 139
6.9
THERMAL CHARACTERISTICS ...................................................................................... 139
4.3.67
Uncorrectable Error Mask Register
4.3.68
Uncorrectable Error Severity Register
Contents
Copyright © 2007–2010, Texas Instruments Incorporated
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
List of Figures
3-1
Block Diagram .................................................................................................................... 22
3-2
Power-Up Sequence Diagram .................................................................................................. 23
3-3
Power-Down Sequence Diagram
3-4
3-5
3-6
3-7
3-8
3-9
4-1
5-1
5-2
5-3
5-4
5-5
5-6
..............................................................................................
Serial EEPROM Applications ...................................................................................................
Serial-Bus Start/Stop Conditions and Bit Transfers..........................................................................
Serial-Bus Protocol Acknowledge ..............................................................................................
Serial-Bus Protocol – Byte Write ...............................................................................................
Serial-Bus Protocol – Byte Read ...............................................................................................
Serial-Bus Protocol – Multiple-Byte Read .....................................................................................
XIO3130 Enumerations Topology ..............................................................................................
NonPCI Hot Plug Power-Up Cycle ...........................................................................................
PCI Hot Plug Power-Up Cycle With PWFRDn Feedback .................................................................
PCI Hot Plug Power-Up Cycle With No PWGRDn Feedback ............................................................
Normal Power-Down ...........................................................................................................
Surprise Removal ...............................................................................................................
Effect When PWFRGn Goes Low ............................................................................................
Copyright © 2007–2010, Texas Instruments Incorporated
List of Figures
23
26
27
27
27
28
28
34
130
130
131
131
132
132
7
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
List of Tables
2-1
XIO3130 Terminal Assignments................................................................................................ 14
2-2
XIO3130 Terminals Sorted Alphanumerically
2-3
XIO3130 Signal Names Sorted Alphabetically ............................................................................... 16
2-4
Power Supply Terminals
2-5
Combined Power Terminals
2-6
2-7
2-8
2-9
2-10
2-11
3-1
3-2
3-3
3-4
3-5
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4-13
4-14
4-15
4-16
4-17
4-18
4-19
4-20
4-21
4-22
4-23
4-24
4-25
4-26
4-27
4-28
4-29
4-30
8
................................................................................
........................................................................................................
....................................................................................................
Ground Terminals ................................................................................................................
PCI Express Reference Clock Terminals .....................................................................................
PCI Express Terminals ..........................................................................................................
PCI Hot Plug Strapping Terminals .............................................................................................
GPIO Terminals ..................................................................................................................
Miscellaneous Terminals ........................................................................................................
Initial Flow Control Credit Advertisements ....................................................................................
Messages Supported by the XIO3130.........................................................................................
EEPROM Register Loading Map ...............................................................................................
Register for Programming Serial-Bus Devices ...............................................................................
Switch Reset Options ............................................................................................................
PCI Express Upstream Port Configuration Register Map (Type 1) ........................................................
Extended Configuration Space (Upstream Port) .............................................................................
Bit Descriptions – Command Register ........................................................................................
Bit Descriptions – Status Register .............................................................................................
Bit Descriptions – Class Code and Revision ID Register ..................................................................
Bit Descriptions – I/O Base Register ..........................................................................................
Bit Descriptions – I/O Limit Register ..........................................................................................
Bit Descriptions – Secondary Status Register ...............................................................................
Bit Descriptions – Memory Base Register ....................................................................................
Bit Descriptions – Memory Limit Register ....................................................................................
Bit Descriptions – Pre-fetchable Memory Base Register ...................................................................
Bit Descriptions – Pre-fetchable Memory Limit Register ...................................................................
Bit Descriptions – Pre-fetchable Base Upper 32 Bits Register ............................................................
Bit Descriptions – Pre-fetchable Limit Upper 32 Bits Register ............................................................
Bit Descriptions – I/O Base Upper 16 Bits Register ........................................................................
Bit Descriptions – I/O Limit Upper 16 Bits Register .........................................................................
Bit Descriptions – Bridge Control Register ...................................................................................
Bit Descriptions – Power Management Capabilities Register .............................................................
Bit Descriptions – Power Management Control/Status Register ..........................................................
Bit Descriptions – PM Bridge Support Extension Register .................................................................
Bit Descriptions – MSI Message Control Register ..........................................................................
Bit Descriptions – MSI Message Address Register .........................................................................
Bit Descriptions – MSI Data Register .........................................................................................
Bit Descriptions – PCI Express Capabilities Register ......................................................................
Bit Descriptions – Device Capabilities Register .............................................................................
Bit Descriptions – Device Control Register ..................................................................................
Bit Descriptions – Device Status Register ....................................................................................
Bit Descriptions – Link Capabilities Register .................................................................................
Bit Descriptions – Link Control Register ......................................................................................
Bit Descriptions – Link Status Register .......................................................................................
List of Tables
15
17
17
18
18
19
19
20
21
24
25
29
31
32
35
36
37
38
39
41
42
42
43
43
44
44
44
45
45
45
47
48
49
50
51
52
52
54
55
55
57
57
58
59
Copyright © 2007–2010, Texas Instruments Incorporated
XIO3130
www.ti.com
4-31
4-32
4-33
4-34
4-35
4-36
4-37
4-38
4-39
4-40
4-41
4-42
4-43
4-44
4-45
4-46
4-47
4-48
4-49
4-50
4-51
4-52
4-53
4-54
4-55
4-56
4-57
4-58
4-59
4-60
4-61
4-62
4-63
4-64
4-65
4-66
4-67
4-68
4-69
4-70
4-71
4-72
4-73
4-74
4-75
4-76
4-77
4-78
SLLS693F – MAY 2007 – REVISED JANUARY 2010
......................................................................
Bit Descriptions – Serial Bus Control and Status Register .................................................................
Bit Descriptions – Upstream Port Link PM Latency Register ..............................................................
Bit Descriptions – Global Chip Control Register .............................................................................
Bit Descriptions – GPIO A Control Register .................................................................................
Bit Descriptions – GPIO B Control Register .................................................................................
Bit Descriptions – GPIO C Control Register .................................................................................
Bit Descriptions – GPIO D Control Register ..................................................................................
Bit Descriptions – GPIO Data Register ........................................................................................
Bit Descriptions – Subsystem Access Register .............................................................................
Bit Descriptions – General Control Register .................................................................................
Bit Descriptions – Downstream Ports Link PM Latency Register .........................................................
Bit Descriptions – Global Switch Control Register ..........................................................................
Uncorrectable Error Status Register ..........................................................................................
Uncorrectable Error Mask Register ...........................................................................................
Uncorrectable Error Severity Register ........................................................................................
Correctable Error Status Register .............................................................................................
Correctable Error Mask Register ..............................................................................................
Advanced Error Capabilities and Control Register ..........................................................................
PCI Express Downstream Port Configuration Register Map (Type 1) ....................................................
Extended Configuration Space (Downstream Port)..........................................................................
Bit Descriptions – Command Register ........................................................................................
Bit Descriptions – Status Register .............................................................................................
Bit Descriptions – Class Code and Revision ID Register ..................................................................
Bit Descriptions – I/O Base Register ..........................................................................................
Bit Descriptions – I/O Limit Register ..........................................................................................
Bit Descriptions – Secondary Status Register ...............................................................................
IBit Descriptions – Memory Base Register ...................................................................................
Bit Descriptions – Memory Limit Register ....................................................................................
Descriptions – Pre-fetchable Memory Base Register .......................................................................
Bit Descriptions – Pre-fetchable Memory Limit Register ...................................................................
Bit Descriptions – Pre-fetchable Base Upper 32 Bits Register ............................................................
Descriptions – Pre-fetchable Limit Upper 32 Bits Register ................................................................
Bit Descriptions – I/O Base Upper 16 Bits Register ........................................................................
Bit Descriptions – I/O Limit Upper 16 Bits Register .........................................................................
Bit Descriptions – Bridge Control Register ...................................................................................
Bit Descriptions – Power Management Capabilities Register ............................................................
Bit Descriptions – Power Management Control/Status Register .........................................................
Bit Descriptions – PM Bridge Support Extension Register ...............................................................
Bit Descriptions – MSI Message Control Register .........................................................................
Bit Descriptions – MSI Message Address Register .......................................................................
Bit Descriptions – MSI Data Register .......................................................................................
Bit Descriptions – PCI Express Capabilities Register .....................................................................
Bit Descriptions – Device Capabilities Register ............................................................................
Bit Descriptions – Device Control Register .................................................................................
Bit Descriptions – Device Status Register ..................................................................................
Bit Descriptions – Link Capabilities Register ...............................................................................
Bit Descriptions – Link Control Register ....................................................................................
Bit Descriptions – Serial Bus Slave Address Register
Copyright © 2007–2010, Texas Instruments Incorporated
List of Tables
60
60
62
63
65
67
69
71
72
77
77
78
79
81
81
83
84
84
85
87
88
89
89
90
93
93
94
94
95
95
96
96
96
97
97
98
100
101
102
103
104
104
107
108
108
110
110
111
9
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4-79
4-80
4-81
4-82
4-83
4-84
4-85
4-86
4-87
4-88
4-89
4-90
5-1
5-2
5-3
10
www.ti.com
.....................................................................................
Bit Descriptions – Slot Capabilities Register ...............................................................................
Bit Descriptions – Slot Control Register .....................................................................................
Bit Descriptions – Slot Status Register ......................................................................................
Bit Descriptions – General Control Register ................................................................................
Bit Descriptions – General Slot Info Register ..............................................................................
Uncorrectable Error Status Register .........................................................................................
Uncorrectable Error Mask Register ..........................................................................................
Uncorrectable Error Severity Register ......................................................................................
Correctable Error Status Register ...........................................................................................
Correctable Error Mask Register .............................................................................................
Advanced Error Capabilities and Control Register ........................................................................
GPIO Matrix .....................................................................................................................
PCI Hot Plug Sideband Signals ...............................................................................................
Pins Assigned to GPIO Control Registers ...................................................................................
Bit Descriptions – Link Status Register
List of Tables
112
113
114
116
118
121
122
122
124
125
125
126
128
129
129
Copyright © 2007–2010, Texas Instruments Incorporated
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
XIO3130
Check for Samples: XIO3130
1
Features
12
• PCI Express Base Specification, Revision 1.1
• PCI Express Card Electromechanical
Specification, Revision 1.1
• PCI-to-PCI Bridge Architecture Specification,
Revision 1.1
• PCI Bus Power Management Interface
Specification, Revision 1.2
• PCI Express Fanout Switch With One ×1
Upstream Port and Three ×1 Downstream Ports
• Packet Transmission Starts While Reception
Still in Progress (Cut-Through)
• 256-Byte Maximum Data Payload Size
• Peer-to-Peer Support
• Wake Event and Beacon Support
• Support for D1, D2, D3hot, and D3cold
• Active State Power Management (ASPM) Using
Both L0s and L1
• Low-Power PCI Express Transmitter Mode
• Integrated AUX Power Switch Drains VAUX
Power Only When Main Power Is Off
• Integrated PCI Hot Plug Support
• Integrated REFCLK Buffers for Switch
Downstream Ports
• 3.3-V Multifunction I/O Pins for PCI Hot Plug
Status and Control or General Purpose I/Os
• Optional Serial EEPROM for System-Specific
Configuration Register Initialization
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PCI Express, PCI Hot Plug are trademarks of others.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2010, Texas Instruments Incorporated
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
2
www.ti.com
Introduction
The Texas Instruments XIO3130 switch is an integrated PCI Express fanout switch solution with one
upstream x1 port and three downstream x1 ports. This high-performance integrated solution provides the
latest in PCI Express switch technology including cut-through architecture, integrated reference clock
buffers for downstream ports, integrated main power/VAUX power switch, and downstream port PCI Hot
Plug® support.
The reader is assumed to have prior knowledge of the PCI Express interface and associated terminology
and of the PCI-SIG specifications.
2.1
Description
The Texas Instruments XIO3130 switch is a PCI Express ×1 3-port fanout switch. The XIO3130 provides a
single x1 upstream port supporting full 250-MB/s packet throughput in each direction simultaneously.
Three independently configurable ×1 downstream ports are provided that also support full 250-MB/s
packet throughput in each direction simultaneously.
A cut-through architecture is implemented to reduce the latency associated with packets moving through
the PCI Express fabric. As soon as the address or routing information is decoded within the header of a
packet entering an ingress port, the packet is directed to the egress port for forwarding. Packet poisoning
using the EDB framing signal is supported in circumstances where packet errors are detected after the
transmission of the egress packet begins.
The downstream ports may be configured to support PCI Hot Plug slot implementations. In this scenario,
the system designer may decide to use the integrated PCI Hot Plug-compliant controller. This feature is
available through the classic PCI configuration space under the PCI Express Capability Structure. When
enabled, the downstream ports provide the PCI Hot Plug standard mechanism to apply and remove power
to the slot or socket.
Power-management features include Active State Power Management, PME mechanisms, the
Beacon/Wake protocol, and all conventional PCI D-states. When ASPM is enabled, each link
automatically saves power when idle using the L0s and L1 states. PME messages are supported along
with the PME_Turn_Off/PME_TO_Ack protocol.
When enabled, the upstream port supports Beacon transmission as well as the WAKE side band signal to
wake the system as the result of a PCI Hot Plug event. Furthermore, the downstream ports may be
configured to detect Beacon from downstream devices and forward this upstream. The switch also
supports the translation and forwarding of WAKE from a downstream device into Beacon on the upstream
port for cabled implementations.
2.2
Related Documents
Trademarks
12
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
2.3
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Document Conventions
Throughout this data manual, several conventions are used to convey information. These conventions are
listed below:
1. To identify a binary number or field, a lower case b follows the numbers. For example: 000b is a 3-bit
binary field.
2. To identify a hexadecimal number or field, a lower case h follows the numbers. For example: 8AFh is a
12-bit hexadecimal field.
3. All other numbers that appear in this document that do not have either a b or h following the number
are assumed to be decimal format.
4. If the signal or terminal name has a bar above the name (for example, GRST), then this indicates the
logical NOT function. When asserted, this signal is a logic low, 0, or 0b.
5. Differential signal names end with P, N, +, or – designators. The P or + designators signify the positive
signal associated with the differential pair. The N or – designators signify the negative signal
associated with the differential pair.
6. RSVD indicates that the referenced item is reserved.
7. In Sections 4 through 6, the configuration space for the bridge is defined. For each register bit, the
software-access method is identified in an access column. The legend for this access column includes
the following entries:
– r – read access by software
– u – updates by the bridge internal hardware
– w – write access by software
– c – clear an asserted bit with a write-back of 1b by software. Write of zero to the field has no effect
– s – the field may be set by a write of one. Write of zero to the field has no effect.
– na – not accessible or not applicable
2.4
Ordering Information
ORDERING NUMBER
TEMPERATURE
XIO3130
0°C to 70°C
XIO3130I
–40°C to 85°C
PACKAGE
196-terminal ZHC
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
13
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
2.5
www.ti.com
Terminal Assignments
The XIO3130 is packaged in a 196-ball ZHC MicroStar™ BGA.
Table 2-1. XIO3130 Terminal Assignments
A
B
C
D
E
F
G
H
J
K
L
M
N
P
DN2_
PERn
VSSA
(2)
DN2_
Petn
DN2_
REFCKOn
DN2_
REFCKOp
VDD15
GPIO15
VDD15
VDD15
14
GPIO12
SCL
VDD15
GPIO4
VSSA
(2)
13
RSVD
GPIO13
VDD15
SDA
VDD15
DN2_
PERp
VDD15
DN2_
PETp
VSSA
(2)
VSSA
(2)
DN2_
DPSTRP
GPIO6
VDD15
GPIO7
12
GPIO2
RSVD
GPIO3
VDD33
VSS
VSSA
(2)
VDDA15
(2)
VSSA
(2)
VDDA15
(2)
VDD33
GPIO5
VDD15
GPIO14
GPIO16
11
VDD33
GPIO1
VDD15
VSS
VSS
VSSA
(2)
VDDA15
(2)
VDDA15
(2)
VDDA15
(2)
VSS
VSS
VDD15
GPIO11
VDD33
10
VSSA
(1)
VDD15
DN1_
DPSTRP
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
GPIO8
VDD15
VSSA
(3)
9
DN1_
REFCK
Op
DN1_
REFCK
On
VSSA
(1)
VDDA15
(1)
VSS
VSS
VSS
VSS
VSS
VSS
VSSA
(3)
VSSA
(3)
DN3_
PERp
DN3_
PERn
8
DN1_
PETp
DN1_
PETn
VSSA
(1)
VDDA15
(1)
VSS
VSS
VSS
VSS
VSS
VSS
VDDA15
(3)
VDDA15
(3)
VDD15
VSSA
(3)
7
VDDA15
(1)
VDD15
VSSA
(1)
VDDA15
(1)
VSS
VSS
VSS
VSS
VSS
VSS
VDDA15
(3)
VSSA
(3)
DN3_
PETp
DN3_
PETn
6
DN1_
PERp
DN1_
PERn
GPIO0
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VDDA15
(3)
VDDA15
(3)
VSSA
(3)
DN3_
REFCKOn
5
VSSA
(1)
DN1_
PERST
VDD15
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSSA
(3)
DN3_
REFCKOp
4
VDD15
VDD33
RSVD
RSVD
VSSA
REF
VDD
COMB
33
VDDA15
(0)
VDDA15
(0)
VDDA15
(0)
VDD15
VSS
VDD33
DN3_
DPSTRP
VDD15
3
VDD33
VDD15
WAKE
VDD
COMBIO
REFR1
VDD15
REF
VSSA
(0)
VDD15
VDDA33
VDDA15
(0)
GPIO18
GPIO17
GPIO9
VDD15
2
DN2_
PERST
VDD15
GRST
REFR0
VDD33
REF
VDD15
UP_
PETn
VDDA15
(0)
UP_
PERn
VSS
UP_
REFCKIn
VDD15
CLKREQ
_UP
GPIO10
1
DN3_
PERST
UP_
PERST
VDD
COMB15
VSSD
REF
VAUX33
REF
VDD15
UP_
PETp
VSSA
(0)
UP_
PERp
VSSA
(0)
UP_
REFCKIp
VDD15
VDD33
RSVD
14
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 2-2. XIO3130 Terminals Sorted Alphanumerically
Ball
Signal Name
Ball
Signal Name
Ball
Signal Name
Ball
Signal Name
Ball
Signal Name
A01
DN3_PERST
C13
VDD15
F11
VSSA(2)
J08
VSS
M06
VDDA15(3)
A02
DN2_PERST
C14
VDD15
F12
VSSA(2)
J09
VSS
M07
VSSA(3)
A03
VDD33
D01
VSSDREF
F13
DN2_PERp
J10
VSS
M08
VDDA15(3)
A04
VDD15
D02
REFR0
F14
DN2_PERn
J11
VDDA15(2)
M09
VSSA(3)
A05
VSSA(1)
D03
VDDCOMBIO
G01
UP_PETp
J12
VDDA15(2)
M10
GPIO8
A06
DN1_PERp
D04
RSVD
G02
UP_PETn
J13
VSSA(2)
M11
VDD15
A07
VDDA15(1)
D05
VSS
G03
VSSA(0)
J14
DN2_REFCKOn
M12
VDD15
A08
DN1_PETp
D06
VSS
G04
VDDA15(0)
K01
VSSA(0)
M13
GPIO6
A09
DN1_REFCKOp
D07
VDDA15(1)
G05
VSS
K02
VSS
M14
GPIO15
A10
VSSA(1)
D08
VDDA15(1)
G06
VSS
K03
VDDA15(0)
N01
VDD33
A11
VDD33
D09
VDDA15(1)
G07
VSS
K04
VDD15
N02
CLKREQ_UP
A12
GPIO2
D10
VSS
G08
VSS
K05
VSS
N03
GPIO9
A13
RSVD
D11
VSS
G09
VSS
K06
VSS
N04
DN3_DPSTRP
A14
GPIO12
D12
VDD33
G10
VSS
K07
VSS
N05
VSSA(3)
B01
UP_PERST
D13
SDA
G11
VDDA15(2)
K08
VSS
N06
VSSA(3)
B02
VDD15
D14
GPIO4
G12
VDDA15(2)
K09
VSS
N07
DN3_PETp
B03
VDD15
E01
VAUX33REF
G13
VDD15
K10
VSS
N08
VDD15
B04
VDD33
E02
VDD33REF
G14
VSSA(2)
K11
VSS
N09
DN3_PERp
B05
DN1_PERST
E03
REFR1
H01
VSSA(0)
K12
VDD33
N10
VDD15
B06
DN1_PERn
E04
VSSAREF
H02
VDDA15(0)
K13
VSSA(2)
N11
GPIO11
B07
VDD15
E05
VSS
H03
VDD15
K14
DN2_REFCKOp
N12
GPIO14
B08
DN1_PETn
E06
VSS
H04
VDDA15(0)
L01
UP_REFCKIp
N13
VDD15
B09
DN1_REFCKOn
E07
VSS
H05
VSS
L02
UP_REFCKIn
N14
VDD15
B10
VDD15
E08
VSS
H06
VSS
L03
GPIO18
P01
RSVD
B11
GPIO1
E09
VSS
H06
VSS
L04
VSS
P02
GPIO10
B12
RSVD
E10
VSS
H07
VSS
L05
VSS
P03
VDD15
B13
GPIO13
E11
VSS
H08
VSS
L06
VDDA15(3)
P04
VDD15
B14
SCL
E12
VSS
H09
VSS
L07
VDDA15(3)
P05
DN3_REFCKOp
C01
VDDCOMB15
E13
VDD15
H10
VSS
L08
VDDA15(3)
P06
DN3_REFCKOn
C02
GRST
E14
VSSA(2)
H11
VDDA15(2)
L09
VSSA(3)
P07
DN3_PETn
C03
WAKE
F01
VDD15
H12
VSSA(2)
L10
VSS
P08
VSSA(3)
C04
RSVD
F02
VDD15
H13
DN2_PETp
L11
VSS
P09
DN3_PERn
C05
VDD15
F03
VDD15REF
H14
DN2_PETn
L12
GPIO5
P10
VSSA(3)
C06
GPIO0
F04
VDDCOMB33
J01
UP_PERp
L13
DN2_DPSTRP
P11
VDD33
C07
VSSA(1)
F05
VSS
J02
UP_PERn
L14
VDD15
P12
GPIO16
C08
VSSA(1)
F06
VSS
J03
VDDA33
M01
VDD15
P13
GPIO7
C09
VSSA(1)
F07
VSS
J04
VDDA15(0)
M02
VDD15
P14
VDD15
C10
DN1_DPSTRP
F08
VSS
J05
VSS
M03
GPIO17
C11
VDD15
F09
VSS
J06
VSS
M04
VDD33
C12
GPIO3
F10
VSS
J07
VSS
M05
VSS
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
15
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 2-3. XIO3130 Signal Names Sorted Alphabetically
Signal Name
Ball
Signal Name
Ball
CLKREQ_UP
N02
GPIO5
L12
DN1_DPSTRP
C10
GPIO6
M13
DN1_PERn
B06
GPIO7
P13
DN1_PERp
A06
GPIO8
M10
DN1_PERST
B05
GPIO9
N03
DN1_PETn
B08
GRST
C02
DN1_PETp
D02
A08 Suggested Program Value
REFR0
DN1_REFCKOn
B09
REFR1
E03
DN1_REFCKOp
A09
RSVD
A13, B12, C04, D04, P01
DN2_DPSTRP
L13
SCL
B14
DN2_PERn
F14
SDA
D13
DN2_PERp
F13
UP_PERn
J02
DN2_PERST
A02
UP_PERp
J01
DN2_PETn
H14
UP_PERST
B01
DN2_PETp
H13
UP_PETn
G02
DN2_REFCKOn
J14
UP_PETp
G01
DN2_REFCKOp
K14
UP_REFCKIn
L02
DN3_DPSTRP
N04
UP_REFCKIp
L01
DN3_PERn
P09
VAUX33REF
E01
DN3_PERp
N09
VDD15
DN3_PERST
A01
VDDA15(0)
DN3_PETn
P07
VDDA15(1)
A07, D07, D08, D09
DN3_PETp
N07
VDDA15(2)
G11, G12, H11, J11, J12
DN3_REFCKOn
P06
VDDA15(3)
L06, L07, L08, M06, M08
DN3_REFCKOp
P05
VDD15REF
GPIO0
C06
VDD33
GPIO1
B11
VDD33REF
GPIO10
P02
VDDA33
J03
GPIO11
N11
VDDCOMB15
C01
GPIO12
A14
VDDCOMB33
F04
GPIO13
B13
VDDCOMBIO
A04, B02, B03, B07, B10, C05, C11, C13,
C14, E13, F01, F02, G13, H03, K04, L14,
M01, M02, M11, M12, N08, N10, N13, N14,
P03, P04, P14
G04, H02, H04, J04, K03
F03
A03, A11, B04, D12, K12, M04, N01, P11
E02
D03
D05, D06, D10, D11, E05, E06, E07, E08,
E09, E10, E11, E12, F05, F06, F07, F08,
F09, F10, G05, G06, G07, G08, G09, G10,
H05, H06, H07, H08, H09, H10, J05, J06,
J07, J08, J09, J10, K02, K05, K06, K07,
K08, K09, K10, K11, L04, L05, L10, L11,
M05
GPIO14
N12
VSS
GPIO15
M14
VSSA(0)
G03, H01, K01
GPIO16
P12
VSSA(1)
A05, A10, C07, C08, C09
GPIO17
M03
VSSA(2)
E14, F11, F12, G14, H12, J13, K13
GPIO18
L03
VSSA(3)
L09, M07, M09, N05, N06, P08, P10
GPIO2
A12
VSSAREF
E04
GPIO3
C12
VSSDREF
D01
GPIO4
D14
WAKE
C03
16
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
2.6
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Terminal Descriptions
Table 2-4. Power Supply Terminals
Signal
Ball
I/O Type
VDDA15(0)
G04, H02, H04, J04,
K03
PWR
Filter
1.5-V analog power terminals for PCI-Express upstream port
0
VDDA15(1)
A07, D07, D08, D09
PWR
Filter
1.5-V analog power terminals for PCI-Express downstream
port 1
VDDA15(2)
G11, G12, H11, J11, J12
PWR
Filter
1.5-V analog power terminals for PCI-Express downstream
port 2
VDDA15(3)
L06, L07, L08, M06, M08
PWR
Filter
1.5-V analog power terminals for PCI-Express downstream
port 3
VDD15
A04, B02, B03, B07,
B10, C05, C11, C13,
C14, E13, F01, F02,
G13, H03, K04, L14,
M01, M02, M11, M12,
N08, N10, N13, N14,
P03, P04, P14
PWR
Bypass
capacitors
1.5-V digital core power terminals
VDD33
A03, A11, B04, D12,
K12, M04, N01, P11
PWR
Bypass
capacitors
3.3-V digital I/O power terminals
J03
PWR
Filter
3.3-V analog power terminal
E01
PWR
Bypass
capacitors
3.3-V digital VAUX power terminal
VDD15REF
F03
PWR
Filter
1.5-V PCI-Express reference power terminal
VDD33REF
E02
PWR
Filter
3.3-V PCI-Express reference power terminal
VDDA33
VAUX33REF
External parts
Description
Table 2-5. Combined Power Terminals
Signal
VDDCOMBIO
VDDCOMB33
VDDCOMB15
Ball
D03
F04
C01
I/O Type
Passive
Passive
Passive
External Parts
Description
Bypass capacitors
Internally combined 3.3-V main and VAUX power output for external
bypass capacitor filtering. Supplies all internal 3.3-V input and output
circuitry powered during D3 cold. Caution: Do not use this terminal to
supply external power to other devices.
Bypass capacitors
Internally combined 3.3-V main and VAUX power output for external
bypass capacitor filtering. Supplies all internal 3.3-V circuitry powered
during D3 cold. Caution: Do not use this terminal to supply external
power to other devices.
Bypass capacitors
Internally combined 1.5-V main and VAUX power output for external
bypass capacitor filtering. Supplies all internal 1.5-V circuitry powered
during D3 cold. Caution: Do not use this terminal to supply external
power to other devices.
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
17
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 2-6. Ground Terminals
Signal
Ball
I/O Type
D05, D06, D10, D11, E05,
E06, E07, E08, E09, E10,
E11, E12, F05, F06, F07,
F08, F09, F10, G05, G06,
G07, G08, G09, G10,
H05, H06, H07, H08, H09,
H10, J05, J06, J07, J08,
J09, J10, K02, K05, K06,
K07, K08, K09, K10, K11,
L04, L05, L10, L11, M05
GND
Digital ground terminals
G03, H01, K01
GND
Analog ground terminals for upstream Port 0
VSSA(1)
A05, A10, C07, C08, C09
GND
Analog ground terminals for downstream Port 1
VSSA(2)
E14, F11, F12, G14, H12,
J13, K13
GND
Analog ground terminals for downstream Port 2
VSSA(3)
L09, M07, M09, N05, N06,
P08, P10
GND
Analog ground terminals for downstream Port 3
VSSAREF
E04
GND
1.5-V PCI-Express analog reference ground terminal
VSSDREF
D01
GND
1.5-V PCI-Express digital reference ground terminal
VSS
VSSA(0)
Description
Table 2-7. PCI Express Reference Clock Terminals
Signal
Ball
I/O Type
External Parts
Description
UP_REFCKIp
UP_REFCKIn
L01
L02
HS DIFF IN
DN1_REFCKOp
DN1_REFCKOn
A09
B09
HS DIFF OUT
100 MHz differential reference clock outputs for downstream port 1
DN2_REFCKOp
DN2_REFCKOn
K14
J14
HS DIFF OUT
100 MHz differential reference clock outputs for downstream port 2
DN3_REFCKOp
DN3_REFCKOn
P05
P06
HS DIFF OUT
100 MHz differential reference clock outputs for downstream port 3
18
Reference clock inputs. REFCKIp and REFCKIn comprise the
differential input pair for the 100-MHz system reference clock.
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 2-8. PCI Express Terminals
Ball
I/O Type
External Parts
UP_PETp
UP_PETn
Signal
G01
G02
HS DIFF
OUT
Description
Series capacitors
High-speed differential transmit pair for upstream port 0
DN1_PETp
DN1_PETn
A08
B08
HS DIFF
OUT
Series capacitors
High-speed differential transmit pair for downstream port 1
DN2_PETp
DN2_PETn
H13
H14
HS DIFF
OUT
Series capacitors
High-speed differential transmit pair for downstream port 2
DN3_PETp
DN3_PETn
N07
P07
HS DIFF
OUT
Series capacitors
High-speed differential transmit pair for downstream port 3
UP_PERp
UP_PERn
J01
J02
HS DIFF IN
High-speed differential receiver pair for upstream port 0
DN1_PERp
DN1_PERn
A06
B06
HS DIFF IN
High-speed differential receiver pair for downstream port 1
DN2_PERp
DN2_PERn
F13
F14
HS DIFF IN
High-speed differential receiver pair for downstream port 2
DN3_PERp
DN3_PERn
N09
P09
HS DIFF IN
High-speed differential receiver pair for downstream port 3
REFR0
REFR1
D02
E03
Passive
External bias
resistor
External reference resistor terminals for setting TX driver current. An
external resistor is connected between these terminals.
PCI-Express reset input. When logic high, the PERST signal
identifies that the system power is stable. When logic low, the
PERST signal generates an internal power-on reset.
UP_PERST
B01
System-side
LV CMOS IN
pullup resistor
DN1_PERST
B05
LV CMOS O
Pulldown resistor
PCI-Express reset output for downstream port 1.
DN2_PERST
A02
LV CMOS O
Pulldown resistor
PCI-Express reset output for downstream port 2.
DN3_PERST
A01
LV CMOS O
Pulldown resistor
PCI-Express reset output for downstream port 3.
C03
System-side
LV CMOS I/O
pullup resistor
Note: The UP_PERST input buffer has hysteresis.
WAKE
WAKE is an active low signal that is driven low to reactivate the
PCI-Express link hierarchy’s main power rails and reference clocks.
Note: Since WAKE is an open-drain output buffer, a system-side
pullup resistor is required.
Table 2-9. PCI Hot Plug Strapping Terminals
Signal
DN1_DPSTR
P
DN2_DPSTR
P
DN3_DPSTR
P
Ball
C10
L13
N04
I/O Type
LV CMOS IN
LV CMOS IN
LV CMOS IN
External Parts
Description
Pullup or pulldown
resistor
Downstream Port 1 Strap. This pin is pulled high at the de-assertion of
reset. GPIO0, GPIO1, and GPIO2 are used as PCI Hot Plug terminals
for downstream port 1 and are no longer available for use as GPIOs.
The three terminals become PRESENT, PWR_ON, and PWR_GOOD
respectively. These GPIOs are available for normal use if this terminal
is pulled low at the de-assertion of reset.
Pullup or pulldown
resistor
Downstream Port 2 Strap. This pin is pulled high at the de-assertion of
reset. GPIO4, GPIO5, and GPIO6 are used as PCI Hot Plug terminals
for downstream port 2 and are no longer available for use as GPIOs.
The three terminals become PRESENT, PWR_ON, and PWR_GOOD
respectively. These GPIOs are available for normal use if this terminal
is pulled low at the de-assertion of reset.
Pullup or pulldown
resistor
Downstream Port 3 Strap. This pin is pulled high at the de-assertion of
reset. GPIO8, GPIO9, and GPIO10 are used as PCI Hot Plug terminals
for downstream port 3 and are no longer available for use as GPIOs.
The three terminals become PRESENT, PWR_ON, and PWR_GOOD
respectively. These GPIOs are available for normal use if this terminal
is pulled low at the de-assertion of reset.
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
19
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 2-10. GPIO Terminals
Signal
Ball
I/O Type
External Parts
Description
GPIO0
C06
LV CMOS I/O
GPIO 0. If the DN1_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the PRSNT hotplug pin for downstream
port 1. Otherwise this pin’s function is programmed with the GPIO A
Control register.
GPIO1
B11
LV CMOS I/O
GPIO 1. If the DN1_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the POWERON hotplug pin for
downstream port 1. Otherwise this pin’s function is programmed with
the GPIO A Control register.
GPIO2
A12
LV CMOS I/O
GPIO 2. If the DN1_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the PWRGD hotplug pin for downstream
port 1. Otherwise this pin’s function is programmed with the GPIO A
Control register
GPIO3
C12
LV CMOS I/O
GPIO 3. This pin’s function is programmed with the GPIO A Control
register.
GPIO4
D14
LV CMOS I/O
GPIO 4. If the DN2_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the PRSNT hotplug pin for downstream
port 2. Otherwise this pin’s function is programmed with the GPIO A
Control register.
GPIO5
L12
LV CMOS I/O
GPIO 5. If the DN2_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the POWERON hotplug pin for
downstream port 2. Otherwise this pin’s function is programmed with
the GPIO A Control register.
GPIO6
M13
LV CMOS I/O
GPIO 6. If the DN2_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the PWRGD hotplug pin for downstream
port 2. Otherwise this pin’s function is programmed with the GPIO A
Control register.
GPIO7
P13
LV CMOS I/O
GPIO 7. This pin’s function is programmed with the GPIO A Control
register.
LV CMOS I/O
GPIO 8. If the DN3_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the PRSNT hotplug pin for downstream
port 3. Otherwise this pin’s function is programmed with the GPIO B
Control register.
LV CMOS I/O
GPIO 9. If the DN3_DPSTRP pin is pulled high at the de-assertion of
reset, this pin functions as the POWERON hotplug pin for
downstream port 3. Otherwise this pin’s function is programmed with
the GPIO B Control register.
GPIO8
M10
GPIO9
N03
GPIO10
P02
LV CMOS I/O
GPIO 10. If the DN3_DPSTRP pin is pulled high at the de-assertion
of reset, this pin functions as the PWRGD hotplug pin for
downstream port 3. Otherwise this pin’s function is programmed with
the GPIO B Control register.
GPIO11
N11
LV CMOS I/O
GPIO 11. This pin’s function is programmed with the GPIO B Control
register.
GPIO12
A14
LV CMOS I/O
GPIO 12. This pin’s function is programmed with the GPIO B Control
register.
GPIO13
B13
LV CMOS I/O
GPIO 13. This pin’s function is programmed with the GPIO B Control
register.
GPIO14
N12
LV CMOS I/O
GPIO 14. This pin’s function is programmed with the GPIO B Control
register.
GPIO15
M14
LV CMOS I/O
GPIO 15. This pin’s function is programmed with the GPIO B Control
register.
GPIO16
P12
LV CMOS I/O
GPIO16. This pin’s function is programmed with the GPIO C Control
register.
GPIO17
M03
LV CMOS I/O
GPIO 17. This pin’s function is programmed with the GPIO C Control
register.
GPIO18
L03
LV CMOS I/O
GPIO 18. This pin’s function is programmed with the GPIO C Control
register.
20
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 2-11. Miscellaneous Terminals
Signal
Ball
I/O Type
C02
LV CMOS IN
GRST
SDA
SCL
External Parts
See description
Description
Global power-on reset input. Note: a pullup to Vaux (if supported) or
VDD3.3 (if not) is required unless this terminal is always driven by
the upstream device.
D13
LV CMOS I/O
Serial Data. This pin is the serial data pin for the EEPROM interface.
B14
LV CMOS O
Serial Clock. This pin is the serial clock pin for the EEPROM
interface.
N02
LV CMOS O
Upstream Clock Request. When asserted low, requests upstream
device restart clock in cases where upstream clock may be removed
in L1
CLKREQ_UP
RSVD
A13, B12,
RSVD
C04, P01
RSVD
D04
Reserved. These terminals must tied to VDD15.
Reserved. This terminal must be tied to GND.
See description
Reserved. Pullup to Vaux (if supported) or VDD3.3 (if not)
Introduction
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
21
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
3
www.ti.com
Description
Figure 3-1 is the block diagram of the XIO3130.
Clock
Distribution/
Reset Logic
PCI
Express
X1 Phy
GPIO
Port 0
(Up)
Logic
PCI Hot
Plug
Virtual
PCI to
PCI
Bridge
EEPROM
Virtual
PCI to
PCI Bridge
Bridge
Virtual
PCI to
PCI Bridge
Bridge
Virtual
PCI to
PCI Bridge
Bridge
Port 1
(Down)
Logic
Port 2
(Down)
Logic
Port 3
(down)
logic
PCI
Express x1
Phy
PCI
Express x1
Phy
PCI
Express x1
Phy
Figure 3-1. Block Diagram
3.1
Power-Up/Power-Down Sequencing
The following sections describe the procedures to power up and power down the XIO3130 switch.
3.1.1
Power-Up Sequence
1. Assert PERST to the device.
2. Apply 1.5-V and 3.3-V voltages in any order with any time relationship and with any ramp rate.
3. Apply a stable PCI Express reference clock.
To meet PCI Express specification requirements, PERST cannot be de-asserted until the following two
delay requirements are satisfied:
• Wait a minimum of 100 ms after applying a stable PCI Express reference clock. The 100-ms limit
satisfies the requirement for stable device clocks by the de-assertion of PERST.
• Wait a minimum of 100 ms after applying power. The 100-ms limit satisfies the requirement for stable
power by the de-assertion of PERST.
See Figure 3-2, Power-Up Sequence Diagram.
22
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Figure 3-2. Power-Up Sequence Diagram
3.1.2
Power-Down Sequence
•
•
•
Assert PERST to the device.
Remove the reference clock.
Remove 3.3-V and 1.5-V voltages.
See the power-down sequence diagram in Figure 3-3. If the VAUX33REF terminal is to remain powered
after a system shutdown, the switch power-down sequence is exactly the same as shown in Figure 3-3.
Figure 3-3. Power-Down Sequence Diagram
3.2
3.2.1
Express Interface
External Reference Clock
The Texas Instruments XIO3130 switch requires a differential 100 MHz common clock reference. The
clock reference must meet all PCI Express electrical specification requirements for frequency tolerance,
spread spectrum clocking, and signal electrical characteristics.
3.2.2
Clock Generator
The clock generator is responsible for generating all internal and external clocks from the PCI Express
reference clock. This includes the PHY transmitter serial link clock, the three downstream reference clock
outputs, the 60-kHz serial bus interface clock, and all internal clock domains.
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
23
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
3.2.3
www.ti.com
Beacon
The XIO3130 supports the PCI Express in-band beacon feature. Beacon is driven on the PCI Express link
by the XIO3130 to request the re-application of main power when in the L2 link state. Once beacon is
activated, the XIO3130 continues to send the beacon signal until main power is restored as indicated by
PERST going inactive. At this time, the beacon signal is deactivated.
3.2.4
WAKE
The XIO3130 supports the PCI Express sideband WAKE feature. WAKE is an active-low signal driven by
the XIO3130 to request the re-application of main power when in the L2 link state. Since WAKE is an
open-collector output, a system-side pullup resistor is required to prevent the signal from floating. If WAKE
to Beacon translation is enabled (see section 3.2.60), the XIO3130 detects when WAKE is asserted and
transmits beacon to alert the system. This enables support for devices that use the WAKE protocol in a
system that does not support it.
3.2.5
Initial Flow Control Credits
The XIO3130 flow control credits are initialized using the rules defined in the PCI Express Base
Specification. Table 3-1 identifies the initial flow control credit advertisement for the XIO3130. The initial
advertisement is exactly the same for both upstream and downstream ports.
Table 3-1. Initial Flow Control Credit Advertisements
Initial Advertisement
Credit Type
3.2.6
Hex
Decimal
Posted Request Headers (PH)
10
16
Posted Request Data (PD)
80
128
Non-Posted Header (NPH)
10
16
Non-Posted Data (NPD)
10
16
Completion Header (CPLH)
10
16
Completion Data (CPLD)
80
128
PCI Express Message Transactions
PCI Express messages are initiated by, received by and passed through the XIO3130. Table 3-2 outlines
message support within the switch.
24
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 3-2. Messages Supported by the XIO3130
Message
Supported
XIO3130 Action
Assert_INTx
Yes
Passed through upstream
Deassert_INTx
Yes
Passed through upstream
PM_Active_State_Nak
Yes
Received and processed
PM_PME
Yes
Passed through upstream
Downstream PCI Hot Plug Event: Initiated upstream
PME_Turn_Off
Yes
Received and processed
Passed through downstream
PME_TO_Ack
Yes
Downstream port: Received and processed
Downstream ports: Initiated upstream
ERR_COR
Yes
Passed through upstream
Initiated upstream
ERR_NONFATAL
Yes
Passed through upstream
Initiated upstream
ERR_FATAL
Yes
Passed through upstream
Initiated upstream
Unlock
Yes
Received and processed
Passed through downstream
Set_Slot_Power_Limit
Yes
Upstream port: Received and processed
Downstream port: Initiated downstream
Advanced Switching Messages
No
Discarded
Vendor Defined Type 0
Yes
Upstream port: Unsupported request
Passed through downstream
Vendor Defined Type 1
Yes
Upstream port: Discarded
Passed through downstream
All supported message transactions are processed according to the PCI Express Base Specification.
3.3
GPIO Terminals
Up to 19 general-purpose input/output (GPIO) terminals are provided for system customization. These
GPIO terminals are 3.3-V tolerant.
The exact number of GPIO terminals available varies based on the implementation of various supported
functions that share GPIO terminals. When any of the shared functions are enabled, the associated GPIO
terminal is disabled. When pulled high, the DPSTRP terminals cause some GPIO terminals to be mapped
to PCI Hot Plug functions for specific ports. Additional information can be found in the DPSTRP pin
descriptions and in Chapter 4.
All GPIO terminals are individually configurable as either inputs or outputs by writing the corresponding
bits in the GPIOA, GPIOB, GPIOC, or GPIOD Control Registers. The GPIO data register is used to
monitor GPIO terminals defined as inputs or to set the state of GPIO terminals defined as outputs. For
more information on GPIO terminals, see sections Section 4.2.61 through Section 4.2.65.
3.4
Serial EEPROM
The XIO3130 provides a two-wire serial-bus interface to load subsystem identification information and
specific register defaults from an external EEPROM. This interface supports slow, fast, and high-speed
EEPROM speed options.
3.4.1
Serial Bus Interface Implementation
To enable the serial bus interface, a pullup resistor must be implemented on the SCL signal. At the rising
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
25
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
edge of PERST or GRST, whichever occurs last, the SCL terminal is checked for a pullup resistor. If one
is detected, bit 3 (SBDETECT) in the serial bus control and status register (see Table 4-32) is set.
Software may disable the serial bus interface at any time by writing a zero to the SBDETECT bit. If no
external EEPROM is required, the serial bus interface is permanently disabled by attaching a pulldown
resistor to the SCL signal.
The XIO3130 implements a two-terminal serial interface with one clock signal (SCL) and one data signal
(SDA). The SCL signal is a unidirectional output from the XIO3130 and the SDA signal is bidirectional.
Both are open-drain signals and require pullup resistors. The XIO3130 is a bus master device and drives
SCL at approximately 60 kHz during data transfers and places SCL in a high-impedance state during bus
idle states. The serial EEPROM is a bus slave device and must acknowledge a slave address equal to
1010_000X binary. Figure 3-4 illustrates a sample application implementing the two-wire serial bus.
VDD33
XIO3130
SERIAL
EEPROM
SCL
SCL
A2
A1
SDA A0
SDA
Figure 3-4. Serial EEPROM Applications
3.4.2
Serial Bus Interface Protocol
All data transfers are initiated by the serial bus master. The beginning of a data transfer is indicated by a
start condition, which is signaled when the SDA line transitions to a low state while SCL is in the high
state, as illustrated in Figure 3-5. The end of a requested data transfer is indicated by a stop condition,
which is signaled by a low-to-high transition of SDA while SCL is in the high state, as shown in Figure 3-5.
Data on SDA must remain stable during the high state of the SCL signal because changes on the SDA
signal during the high state of SCL are interpreted as control signals (i.e., a start or a stop condition).
26
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Figure 3-5. Serial-Bus Start/Stop Conditions and Bit Transfers
Data is transferred serially in 8-bit bytes. During a data transfer operation, an unlimited number of bytes
are transmitted. However, each byte must be followed by an acknowledge bit to continue the data transfer
operation. An acknowledge (ACK) is indicated by the data byte receiver pulling the SDA signal low, so that
it remains low during the high state of the SCL signal. Figure 3-6 illustrates the acknowledge protocol.
Figure 3-6. Serial-Bus Protocol Acknowledge
The XIO3130 performs three basic serial bus operations: single-byte reads, single-byte writes, and
multiple-byte reads. The single-byte operations occur under software control. The multiple-byte read
operations are performed by the serial EEPROM initialization circuitry immediately after a PCI Express
Reset. For details on how the XIO3130 automatically loads the subsystem identification and other register
defaults from the serial-bus EEPROM, see Section 3.4.3, Serial Bus EEPROM Application.
Figure 3-7 illustrates a single-byte write. The XIO3130 issues a start condition and sends the 7-bit slave
device address and the R/W command bit equal to zero. A zero in the R/W command bit indicates that the
data transfer is a write. The slave device acknowledges that it recognizes the slave address. If the
XIO3130 receives no acknowledgment, the SB_ERR status bit is set in the serial-bus control and status
register (PCI offset B3h; see Table 4-32). Next, the XIO3130 sends the EEPROM word address, and
another slave acknowledgment is expected. Then the XIO3130 delivers the data byte (MSB first) and
expects a final acknowledgment before issuing the stop condition.
Figure 3-7. Serial-Bus Protocol – Byte Write
Figure 3-8 illustrates a single-byte read. The XIO3130 issues a start condition and sends the 7-bit slave
device address and the R/W command bit equal to zero (write). The slave device acknowledges that it
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
27
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
recognizes the slave address. Next, the XIO3130 sends the EEPROM word address, and another slave
acknowledgment is expected. Then, the XIO3130 issues a restart condition followed by the 7-bit slave
address and the R/W command bit equal to one (read). Once again, the slave device responds with
acknowledge. Next, the slave device sends the 8-bit data byte, MS bit first. Since this is a one-byte read,
the XIO3130 responds with no acknowledge (logic high), indicating the last data byte. Finally, the XIO3130
issues a stop condition.
Word Address
Slave Address
S
b6
b5
b4
b3
b2
b1
b0
Start
0
A
b7
b6
b5
b4
b3
b2
b1
b0
A
R/W
Slave Address
S
b6
b5
b4
b3
b2
Data Byte
b1
Restart
b0
1
A
b7
b6
b5
b4
b3
b2
b1
b0
M
P
R/W
A = Slave Acknowledgement
M = Master Acknowledgement
S/P = Start/Stop Condition
Figure 3-8. Serial-Bus Protocol – Byte Read
Figure 3-9 illustrates the serial interface protocol during a multiple-byte serial EEPROM download. The
serial bus protocol starts exactly the same way as a one-byte read. The only difference is that multiple
data bytes are transferred. The number of transferred data bytes is controlled by the XIO3130 master.
After each data byte, if more data bytes are requested, the XIO3130 master issues acknowledge (logic
low). The transfer ends after an XIO3130 master no acknowledge (logic high), followed by a stop
condition.
Figure 3-9. Serial-Bus Protocol – Multiple-Byte Read
The PROT_SEL bit (bit 7) in the Serial Bus Control and Status register changes the serial bus protocol.
Each of the three previous serial-bus protocol figures illustrates the PROT_SEL bit default (logic low).
When this control bit is asserted, the word address and corresponding acknowledge are removed from the
serial bus protocol. This feature allows the system designer a second serial bus protocol option when
selecting external EEPROM devices.
3.4.3
Serial Bus EEPROM Application
The registers and corresponding bits that are loaded through the EEPROM are provided in Table 3-3.
Note the following:
• EEPROM bytes 00h through 1Dh affect the general control options for the XIO3130.
• EEPROM bytes 1Eh through 27h affect the operation of the upstream port (port 0).
• Bytes 00h through 27h are loaded into the configuration registers for the upstream virtual bridge or port
0 (see Figure 4-1).
28
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
•
•
•
SLLS693F – MAY 2007 – REVISED JANUARY 2010
EEPROM bytes 28h through 35h correspond to and are loaded into the configuration space for the first
downstream virtual bridge or port 1 (see Figure 4-1).
EEPROM bytes 36h through 43h correspond to and are loaded into the configuration space for the
second downstream virtual bridge or port 2 (see Figure 4-1).
EEPROM bytes 44h through 51h correspond to and are loaded into the configuration space for the
third downstream virtual bridge or port 3 (see Figure 4-1).
Table 3-3. EEPROM Register Loading Map
EEPROM Byte Address
(hex)
Suggested Programmed
Value (hex)
CONFIG Register Address
(hex)
Register Description
0
4C
NA
Global Switch/Upstream Port Function Indicator (1)
1
0
NA
TI Proprietary register (1)
2
24
0B4
Upstream Port Link PM Latency register
3
0
0B5
Upstream Port Link PM Latency register
4
0
0B8
Global Chip Control register
5
0
0B9
Global Chip Control register
6
0
0BA
Global Chip Control register
7
0
0BB
Global Chip Control register
8
0
0BC
GPIOA register
9
0
0BD
GPIOA register
0A
0
0BE
GPIOB register
(1)
0B
0
0BF
GPIOB register
0C
0
0C0
GPIOC register
0D
0
0C1
GPIOC register
0E
0
0C2
GPIOD register
0F
0
0C3
GPIOD register
10
0
0C4
GPIO Data register
11
0
0C5
GPIO Data register
12
0
0C6
GPIO Data register
13
0
0C7
GPIO Data register
14
01
0C8
TI Proprietary register (1)
15
0
0CC
TI Proprietary register (1)
16
0
0CD
TI Proprietary register (1)
17
0
0D0
TI Proprietary register (1)
18
0
0D1
TI Proprietary register (1)
19
14
0D2
TI Proprietary register (1)
1A
32
0D3
TI Proprietary register (1)
1B
2
0DC
TI Proprietary register (1)
1C
0
0DE
TI Proprietary register (1)
1D
0
0DF
TI Proprietary register (1)
1E
0
NA
Global Switch/Upstream Port 0 Function Indicator
1F
0
NA
Not used
20
XX
0E0
Subsystem Access Vendor ID register
21
XX
0E1
Subsystem Access Vendor ID register
22
XX
0E2
Subsystem Access Subsys ID register
23
XX
0E3
Subsystem Access Subsys ID register
24
0
0E4
General Control register
25
24
0E8
Downstream Port Link PM Latency register
Required program value
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
29
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 3-3. EEPROM Register Loading Map (continued)
30
EEPROM Byte Address
(hex)
Suggested Programmed
Value (hex)
CONFIG Register Address
(hex)
26
3F
0E9
Downstream Port Link PM Latency register
27
4
0EA
Global Switch Control register
28
1
NA
Downstream Port 1 Function Indicator
29
0
NA
Not used
2A
01
0C8
TI Proprietary register (1)
2B
0
0CC
TI Proprietary register (1)
2C
0
0CD
TI Proprietary register (1)
2D
0
0D0
TI Proprietary register (1)
2E
0
0D1
TI Proprietary register (1)
2F
14
0D2
TI Proprietary register (1)
30
32
0D3
TI Proprietary register (1)
31
10
0D4
General Control register
Register Description
32
60
0D5
General Control register
33
1A
0EC
L0s Timeout register
34
0
0EE
General Slot Info register
35
0
0EF
General Slot Info register
36
2
NA
Downstream Port 2 Function Indicator
37
0
NA
Not used
38
01
0C8
TI Proprietary register (1)
39
0
0CC
TI Proprietary register (1)
3A
0
0CD
TI Proprietary register (1)
3B
0
0D0
TI Proprietary register (1)
3C
0
0D1
TI Proprietary register (1)
3D
14
0D2
TI Proprietary register (1)
3E
32
0D3
TI Proprietary register (1)
3F
10
0D4
General Control register
40
60
0D5
General Control register
41
1A
0EC
L0s Timeout register
42
0
0EE
General Slot Info register
43
0
0EF
General Slot Info register
44
2
NA
Downstream Port 3 Function Indicator
45
0
NA
Not used
46
01
0C8
TI Proprietary register (1)
47
0
0CC
TI Proprietary register (1)
48
0
0CD
TI Proprietary register (1)
49
0
0D0
TI Proprietary register (1)
4A
0
0D1
TI Proprietary register (1)
4B
14
0D2
TI Proprietary register (1)
4C
32
0D3
TI Proprietary register (1)
4D
10
0D4
General Control register
4E
60
0D5
General Control register
4F
1A
0EC
L0s Timeout register
50
0
0EE
General Slot Info register
51
0
0EF
General Slot Info register
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
This download table must be explicitly followed for the XIO3130 to correctly load initialization values from
a serial EEPROM. All byte locations must be considered when programming the EEPROM.
The XIO3130 addresses the serial EEPROM using a default slave address of 1010_000X binary. For an
EEPROM download operation that occurs immediately after PERST, this address is fixed. The serial
EEPROM in the sample application circuit (Figure 3-4) assumes the 1010b high-address nibble. The lower
three address bits are terminal inputs to the chip, and the sample application shows these terminal inputs
tied to VSS to match the least-significant three address bits.
During an EEPROM download operation, bit 4 (ROMBUSY) in the serial-bus control and status register is
asserted. After the download is finished, bit 4 is negated. At that time, bit 0 (ROM_ERR) in the serial-bus
control and status register may be monitored to verify a successful download.
3.4.4
Accessing Serial Bus Devices Through Software
The XIO3130 provides a programming mechanism to control serial bus devices through system software.
The programming is accomplished through a doubleword of PCI configuration space at offset B0h.
Table 3-4 lists the registers used to program a serial-bus device through software.
Table 3-4. Register for Programming Serial-Bus Devices
PCI Offset
Register Name
Description
B0h
Serial-bus data
This register contains the data byte to send on write commands or
the received data byte on read commands.
B1h
Serial-bus word address
The content of this register is sent as the word address on byte
writes or reads. This register is not used in the quick command
protocol.
B2h
Serial-bus slave address
Write transactions to this register initiate a serial-bus transaction.
The slave device address and the R/W command selector are
programmed through this register.
B3h
Control and Status
Serial interface enable, busy, and error status are communicated
through this register. In addition, the protocol-select bit and serial
bus test bit are programmed through this register.
To access the serial EEPROM through the software interface, the software performs five steps:
1. Reads the Control and Status Byte to verify that the EEPROM interface is enabled (SBDETECT
asserted) and not busy (REQBUSY and ROMBUSY negated).
2. Loads the Serial Bus word address. If the access is a write, the data byte is also loaded.
3. Writes the Serial Bus slave address and read/write command selector byte.
4. Monitors REQBUSY until this bit is negated.
5. Checks SB_ERR to verify that the serial bus operation completed without error. If the operation is a
read, after REQBUSY is negated, the serial bus data byte is valid.
3.5
Switch Reset Features
Four XIO3130 reset options are available:
• Internally-generated power-on reset
• A global reset generated by asserting GRST input terminal
• A PCI Express reset generated by asserting PERST input terminal
• Software-initiated resets that are controlled by sending a PCI Express training control hot reset
Table 3-5 identifies these reset sources and describes how the XIO3130 responds to each reset.
Description
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
31
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 3-5. Switch Reset Options
Reset Option
XIO3130 Feature
Reset Response
Internally-generated power-on
reset
During a power-on cycle, the XIO3130 asserts an
internal reset and monitors the VDDCOMB15 (C01)
terminal. When this terminal reaches 90% of the
nominal input voltage specification, power is
considered stable. After stable power, the XIO3130
monitors the PCI Express reference clock
(REFCLKI) and waits 10 ms after active clocks are
detected. Then, internal power-on reset is
de-asserted.
When the internal power-on reset is asserted, all
control registers, state machines, sticky register bits,
and power management state machines are
initialized to their default state.
Global reset input GRST (C02) When GRST is asserted low, an internal power-on
reset occurs. This reset is asynchronous and
functions during both normal power states and VAUX
power states.
When GRST is asserted low, all control registers,
state machines, sticky register bits, and power
management state machines are initialized to their
default state. When the rising edge of GRST occurs,
the switch samples the state of all static control
inputs and latches the information internally. If an
external serial EEPROM is detected, then a
download cycle is initiated. Also, the process to
configure and initialize the PCI Express link is
started. The switch starts link training within 80 ms
after PERST or GRST is de-asserted.
PCI Express reset input
PERST (B01)
When PERST is asserted low, all control register
This XIO3130 input terminal is used by an upstream bits that are not sticky are reset. Also, all state
PCI Express device to generate a PCI Express reset machines that are not associated with sticky
and to signal a system power good condition.
functionality or VAUX power management are reset.
When PERST is asserted low, all control register When the rising edge of PERST occurs, the switch
bits that are not sticky are reset. Also, all state samples the state of all static control inputs and
machines that are not associated with sticky latches the information internally. If an external
functionality or VAUX power management are reset. serial EEPROM is detected, then a download cycle
When the rising edge of PERST occurs, the switch is initiated. Also, the process to configure and
samples the state of all static control inputs and initialize the PCI Express link is started. The switch
latches the information internally. If an external starts link training within 80 ms after PERST or
serial EEPROM is detected, then a download cycle GRST is de-asserted.
is initiated. Also, the process to configure and
initialize the PCI Express link is started. The switch
starts link training within 80 ms after PERST or
GRST is de-asserted.
Note: The system must assert PERST before power
is removed, before REFCLKI is removed, or before
REFCLKI becomes unstable.
PCI Express training control
hot reset
32
The XIO3130 responds to a training control hot
reset received on the PCI Express interface. After a
training control hot reset, the PCI Express interface
enters the DL_DOWN state.
Description
In the DL_DOWN state, all remaining configuration
register bits and state machines are reset. All
remaining bits exclude sticky bits and EEPROM
loadable bits. All remaining state machines exclude
sticky functionality, EEPROM functionality, and VAUX
power management.
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
4
SLLS693F – MAY 2007 – REVISED JANUARY 2010
XIO3130 Configuration Register Space
This chapter specifies the configuration registers that are used to enumerate the XIO3130 device within a
PC system.
An overview of the configuration register space is provided along with a detailed description of the register
bits associated with the upstream and downstream ports of the XIO3130.
4.1
PCI Configuration Register Space Overview
Each PCI Express port contains a set of PCI configuration registers. One of the upstream port registers,
the Global Chip Control register, is used to control functions across the entire XIO3130.
For downstream ports, only one register set is specified, but this register set is duplicated for each
downstream port. Figure 4-1 illustrates the enumeration topology.
The XIO3130 must appear as a hierarchy of PCI-to-PCI bridges in the manner outlined by the PCI
Express base specification.
NOTE
This numbering scheme is typical but not ensured. Bus numbers are assigned within the
Type 01h configuration header during the initial enumeration of the PCI bus by the system
at power-up.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
33
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Port# 0
Device# 0
Bus# N**
Upstream Port
Header Type 01h
PCI Capability
Structures /
Proprietary
Register Space
000h
03Fh
040h
0FFh
100h
Extended
Configuration
Space / PCI Express
Capability Structures
FFFh
Virtual Internal PCI Bus (Bus# N+1**)
Device# 0
Downstream Port
Header Type 01h
PCI Capability
Structures /
Proprietary
Register Space
Device# 1
000h
Downstream Port
Header Type 01h
03Fh
PCI Capability
Structures /
Proprietary
Register Space
040h
0FFh
100h
Extended
Configuration
Space / PCI Express
Capability Structures
000h
03Fh
040h
0FFh
Device# 2
Downstream Port
Header Type 01h
PCI Capability
Structures /
Proprietary
Register Space
FFFh
Port# 1
Bus# N+2**
03Fh
040h
0FFh
100h
100h
Extended
Configuration
Space / PCI Express
Capability Structures
000h
Extended
Configuration
Space / PCI Express
Capability Structures
FFFh
FFFh
Port# 2
Bus# N+3**
Port# 3
Bus# N+4**
** Example values. Actual bus numbers may change based on system hierarchy.
Figure 4-1. XIO3130 Enumerations Topology
4.2
PCI Express Upstream Port Registers
The default reset domain for all upstream port registers is IPRST. The internal IPRST reset signal is
asserted when the internally-generated power-on reset is asserted, when GRST is asserted, when PERST
is asserted, or when PCI Express training control hot reset is asserted. Some register fields are placed in
a reset domain different from the default reset domain; all bit or field descriptions identify any unique reset
domains. Generally, all sticky bits are placed in the GRST domain and all (non-sticky) EEPROM loadable
bits are placed in the PERST domain.
34
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
4.2.1
SLLS693F – MAY 2007 – REVISED JANUARY 2010
PCI Configuration Space (Upstream Port) Register Map
Table 4-1. PCI Express Upstream Port Configuration Register Map (Type 1)
Register Name
Offset
Device ID
Vendor ID
Status
Command
000h
004h
Class Code
BIST
Revision ID
Header Type
Latency Timer
Cache Line Size
Reserved
Secondary Latency Timer
Subordinate Bus Number
008h
00Ch
010h-014h
Secondary Bus Number
Primary Bus Number
018h
I/O Limit
I/O Base
01Ch
Secondary Status
Memory Limit
Memory Base
020h
Pre-fetchable Memory Limit
Pre-fetchable Memory Base
024h
Pre-fetchable Base Upper 32 Bits
028h
Pre-fetchable Limit Upper 32 Bits
I/O Limit Upper 16 Bits
02Ch
I/O Base Upper 16 Bits
Reserved
034h
Interrupt Pin
Interrupt Line
03Ch
Next-item Pointer
PM CAP ID
Reserved
038h
Bridge Control
Reserved
Power Management Capabilities
PM Data (RSVD)
040h-04Ch
PMCSR_BSE
Power Management CSR
Reserved
MSI Message Control
MSI CAP ID
MSI Message Address
Reserved
Next-item Pointer
SSID/SSVID CAP ID
Subsystem Vendor ID
Reserved
07Ch
080h
084h
088h-08Ch
Next-item Pointer
PCI Express Capability ID
Device Capabilities
090h
094h
Device Status
Device Control
Link Capabilities
098h
09Ch
Link Status
Link Control
0A0h
Reserved
Serial Bus Slave Address
070h
078h
MSI Message Data
Subsystem ID
SB Control and Status
054h
074h
MSI Upper Message Address
PCI Express Capabilities Register
050h
058h-06Ch
Next-item Pointer
Reserved
030h
Capabilities Pointer
0A4h-0ACh
Serial Bus Index
Upstream Port L1 Idle
Serial Bus Data
0B0h
Upstream Port Link PM Latency
0B4h
GPIO B Control
GPIO A Control
0BCh
GPIO D Control
GPIO C Control
0C0h
Global Chip Control
0B8h
GPIO Data
0C4h
TI Proprietary
0C8h-0DCh
Subsystem Access
0E0h
General Control
Global Switch Control
0E4h
Downstream Ports Link PM Latency
Reserved
0E8h
0ECh-0FCh
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
35
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-2. Extended Configuration Space (Upstream Port)
Register Name
Next Capability Offset / Capability Version
4.2.2
Offset
PCI Express Advanced Error Reporting Capabilities ID
100h
Uncorrectable Error Status Register
104h
Uncorrectable Error Mask Register
108h
Uncorrectable Error Severity Register
10Ch
Correctable Error Status Register
110h
Correctable Error Mask
114h
Advanced Error Capabilities and Control
118h
Header Log Register
11Ch
Header Log Register
120h
Header Log Register
124h
Header Log Register
128h
Reserved
12Ch-FFCh
Vendor ID Register
This 16-bit read-only register contains the value 104Ch, which is the vendor ID assigned to Texas
Instruments.
PCI register offset:
00h
Register type:
Read-only
Default value:
104Ch
BIT NUMBER
RESET STATE
4.2.3
15
0
14
0
13
0
12
1
11
0
10
0
9
0
8
0
7
0
6
1
5
0
4
0
3
1
2
1
1
0
0
0
Device ID Register
This 16-bit read-only register contains the value 8232h, which is the device ID assigned by TI to the
XIO3130 upstream port function.
PCI register offset:
02h
Register type:
Read-only
Default value:
8232Ch
BIT NUMBER
RESET STATE
4.2.4
14
0
13
0
12
0
11
0
10
0
9
1
8
0
7
0
6
0
5
1
4
1
3
0
2
0
1
1
0
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Command Registers
PCI register offset:
04h
Register type:
Read/Write; Read-only
Default value:
0000h
BIT NUMBER
RESET STATE
36
15
1
15
0
14
0
13
0
12
0
11
0
10
0
9
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-3. Bit Descriptions – Command Register
BIT
FIELD NAME
ACCESS
15:11
RSVD
r
10
INT_DISABLE
rw
9
FBB_ENB
r
DESCRIPTION
Reserved. When read, these bits return zeros.
INTx disable. This bit is used to enable device-specific interrupts. The XIO3130 upstream port does
not generate any interrupts internally, so this bit is ignored. The XIO3130 does forward INTx
messages from downstream ports to the upstream port.
Fast back-to-back enable. This bit does not apply to PCI-Express, and returns zero when read.
SERR enable. When set, the XIO3130 can signal fatal and nonfatal errors on the upstream PCI
Express interface.
8
SERR_ENB
rw
0 – Disable the reporting of nonfatal errors and fatal errors.
1 – Enable the reporting of nonfatal errors and fatal errors.
7
STEP_ENB
r
Address/data stepping control. This bit does not apply to PCI-Express and is hardwired to 0.
Parity error response enable. Mask bit for the DATAPAR bit in the Status Register.
6
PERR_ENB
0 – The upstream bridge must ignore any address or data parity errors that it detects and
continue normal operation.
rw
1 – The upstream bridge must detect address or data parity errors and report them by setting
the DATAPAR bit in the Status Register.
5
VGA_ENB
r
VGA palette snoop enable. The XIO3130 does not support VGA palette snooping, thus this bit
returns zero when read.
4
MWI_ENB
r
Memory write and invalidate enable. This bit does not apply to PCI-Express, and is hardwired to
zero.
3
SPECIAL
r
Special cycle enable. This bit does not apply to PCI-Express and is hardwired to zero.
Bus master enable. When set, the XIO3130 is enabled to initiate cycles on the upstream PCI
Express interface.
2
MASTER_ENB
0 – Upstream PCI Express interface cannot initiate transactions. The bridge must disable
response to memory and I/O transactions on the PCI interface.
rw
1 – Upstream PCI Express interface can initiate transactions. The bridge can forward memory
and I/O transactions from the secondary interface.
1
MEMORY_ENB
rw
Memory response enable. Setting this bit enables the XIO3130 to respond to memory transactions
on the upstream PCI Express interface.
0
IO_ENB
rw
I/O space enable. Setting this bit enables the XIO3130 to respond to I/O transactions on the
upstream PCI Express interface.
4.2.5
Status Register
The Status register provides information about the primary interface to the system.
PCI register offset:
06h
Register type:
Read Only; Cleared by a Write of One; Hardware Update
Default value:
0010h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
1
3
0
2
0
1
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
0
0
37
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-4. Bit Descriptions – Status Register
BIT
15
FIELD NAME
PAR_ERR
ACCESS
rcu
DESCRIPTION
Detected parity error. This bit is set when the PCI Express interface receives a poisoned TLP on the
upstream port. This bit is set regardless of the state of the Parity Error Response bit in the Command
Register.
0 – No parity error detected.
1 – Parity Error detected.
Signaled system error. This bit is set when the XIO3130 sends an ERR_FATAL or ERR_NONFATAL
message upstream, and the SERR Enable bit in the Command Register is set.
14
SYS_ERR
rcu
0 – No error signaled.
1 – ERR_FATAL or ERR_NONFATAL signaled.
Received master abort. This bit is set when the upstream PCI Express interface of the XIO3130
receives a Completion with Unsupported Request Status
13
MABORT
rcu
0 – Unsupported Request not received.
1 – Unsupported Request received on.
Received target abort. This bit is set when the upstream PCI Express interface of the XIO3130
receives a Completion with Completer Abort Status
12
TABORT_REC
rcu
0 – Completer Abort not received.
1 – Completer Abort received.
Signaled target abort. This bit is set when the upstream PCI Express interface completes a Request
with Completer Abort Status.
11
TABORT_SIG
rcu
10:9
PCI_SPEED
r
8
DATAPAR
rcu
Master data parity error. This bit is set when the XIO3130 receives a poisoned completion or poisons
a write request on the upstream PCI Express interface. This bit is never set if the parity error
response enable bit in the Command register is clear.
7
FBB_CAP
r
Fast back-to-back capable. This bit does not have a meaningful context for a PCI Express device and
is hardwired to 0.
6
RSVD
r
Reserved. When read, this bit returns zero.
5
66MHZ
r
66 MHz capable. This bit does not have a meaningful context for a PCI Express device and is
hardwired to 0.
4
CAPLIST
r
Capabilities list. This bit returns 1 when read, indicating that the XIO3130 supports additional PCI
capabilities.
3
INT_STATUS
r
Interrupt status. This bit reflects the interrupt status of the function. This bit is read-only zero since the
XIO3130 upstream port does not generate any interrupts internally. The XIO3130 does forward INTx
messages from downstream ports to the upstream port (see INTx Support section).
2:0
RSVD
r
Reserved. When read, these bits return zeros.
0 – Completer Abort not signaled.
1 – Completer Abort signaled.
38
DEVSEL timing. These bits are read only zero because they do not apply to PCI Express.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
4.2.6
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Class Code and Revision ID Register
This read-only register categorizes the Base Class, Sub Class, and Programming Interface of the
XIO3130. The Base Class is 06h, identifying the device as bridge device. The Sub Class is 04h,
identifying the function as a PCI-to-PCI bridge, and the Programming Interface is 00h. Also, the TI chip
revision is indicated in the lower byte (02h).
PCI register offset:
08h
Register type:
Read only
Default value:
0604 0002h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
1
25
1
24
0
23
0
22
0
21
0
20
0
19
0
18
1
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
1
0
0
Table 4-5. Bit Descriptions – Class Code and Revision ID Register
BIT
FIELD NAME
ACCESS
31:24
BASECLASS
r
Base Class. This field returns 06h when read, which classifies the function as a Bridge device.
23:16
SUBCLASS
r
Sub Class. This field returns 04h when read, which specifically classifies the function as a
PCI-to-PCI bridge.
15:8
PGMIF
r
Programming Interface. This field returns 00h when read.
7:0
CHIPREV
r
Silicon Revision. This field returns the silicon revision.
4.2.7
DESCRIPTION
Cache Line Size Register
The Cache Line Size Register is implemented by PCI Express devices as a read-write field for legacy
compatibility purposes but has no impact on any PCI Express device functionality.
PCI register offset:
0Ch
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
4.2.8
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Primary Latency Timer Register
This read-only register has no meaningful context for a PCI Express device and returns zeros when read.
PCI register offset:
0Dh
Register type:
Read Only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
39
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.2.9
www.ti.com
Header Type Register
This read-only register indicates that this function has a type one PCI header. Bit seven of this register is a
zero, indicating that the upstream port is a single device.
PCI register offset:
0Eh
Register type:
Read Only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.2.10 BIST Register
Since the XIO3130 does not support a built-in self test (BIST), this read-only register returns the value of
00h when read.
PCI register offset:
0Fh
Register type:
Read Only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.11 Primary Bus Number
This read/write register specifies the bus number of the PCI bus segment to which the upstream PCI
Express interface is connected.
PCI register offset:
18h
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.12 Secondary Bus Number
This read/write register specifies the bus number of the PCI bus segment for the XIO3130’s internal PCI
bus. The XIO3130 uses this register to determine how to respond to a Type 1 configuration transaction.
PCI register offset:
19h
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
40
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.2.13 Subordinate Bus Number
This register specifies the bus number of the highest number PCI bus segment that is downstream of the
XIO3130’s upstream port. The XIO3130 uses this register to determine how to respond to a Type 1
configuration transaction.
PCI register offset:
1Ah
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.14 Secondary Latency Timer Register
This register does not apply to PCI-Express. It is hardwired to zero.
PCI register offset:
1Bh
Register type:
Read Only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.15 I/O Base Register
This read/write register specifies the lower limit of the I/O addresses that the XIO3130 forwards
downstream.
PCI register offset:
1Ch
Register type:
Read/Write; Read Only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-6. Bit Descriptions – I/O Base Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
7:4
IOBASE
rw
I/O base. These bits define the bottom address of the I/O address range that is used to determine
when to forward I/O transactions from one interface to the other. These bits correspond to address
bits [15:12] in the I/O address. The lower 12 I/O address bits are assumed to be 0. The 16 bits
corresponding to address bits [31:16] of the I/O address are defined in the I/O Base Upper 16 Bits
register.
3:0
IOTYPE
r
I/O type. This field is read-only 01h, indicating that the XIO3130 supports 32-bit I/O addressing.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
41
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.16 I/O Limit Register
This read/write register specifies the upper limit of the I/O addresses that the XIO3130 forwards
downstream.
PCI register offset:
1Dh
Register type:
Read/Write; Read Only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-7. Bit Descriptions – I/O Limit Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
I/O limit. These bits define the top address of the I/O address range used to determine when to
forward I/O transactions from one interface to the other. These bits correspond to address bits
[15:12] in the I/O address. The lower 12 I/O address bits are assumed to be FFFh. The 16 bits
corresponding to address bits [31:16] of the I/O address are defined in the I/O Limit Upper 16 Bits
register.
7:4
IOLIMIT
rw
3:0
IOTYPE
r
I/O type. This field is read-only 01h, indicating that the XIO3130 supports 32-bit I/O addressing.
4.2.17 Secondary Status Register
The Secondary Status register provides information about the XIO3130’s internal PCI bus between the
upstream port and the downstream ports.
PCI register offset:
1Eh
Register type:
Read only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-8. Bit Descriptions – Secondary Status Register
42
BIT
FIELD NAME
ACCESS
DESCRIPTION
15
PAR_ERR
r
Detected parity error. This bit is hardwired to zero. It is assumed that the relevant error checking
is unnecessary for the XIO3130’s internal PCI bus.
14
SYS_ERR
r
Received system error. This bit is hardwired to zero. It is assumed that the relevant error
checking is unnecessary for the XIO3130’s internal PCI bus.
13
MABORT
r
Received master abort. This bit is hardwired to zero. It is assumed that the relevant error
checking is unnecessary for the XIO3130’s internal PCI bus.
12
TABORT_REC
r
Received target abort. This bit is hardwired to zero. It is assumed that the relevant error checking
is unnecessary for the XIO3130’s internal PCI bus.
11
TABORT_SIG
r
Signaled target abort. This bit is hardwired to zero. It is assumed that the relevant error checking
is unnecessary for the XIO3130’s internal PCI bus.
10:9
PCI_SPEED
r
DEVSEL timing. These bits are hardwired to 00. These bits do not apply to PCI Express.
8
DATAPAR
r
Master data parity error. This bit is hardwired to zero. It is assumed that the relevant error
checking is unnecessary for the XIO3130’s internal PCI bus.
7
FBB_CAP
r
Fast back-to-back capable. This bit is hardwired to zero. This bit does not apply to PCI Express.
6
RSVD
r
Reserved. When read, this bit returns zero.
5
66MHZ
r
66 MHz capable. This bit is hardwired to zero. This bit does not apply to PCI Express.
4:0
RSVD
r
Reserved. When read, these bits return zeros.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.2.18 Memory Base Register
This read/write register specifies the lower limit of the memory addresses that the XIO3130 forwards
downstream.
PCI register offset:
20h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-9. Bit Descriptions – Memory Base Register
BIT
FIELD NAME
ACCESS
15:4
MEMBASE
rw
3:0
RSVD
r
DESCRIPTION
Memory base. This field defines the bottom address of the memory address range used to
determine when to forward memory transactions from one interface to the other. These bits
correspond to address bits [31:20] in the memory address. The lower 20 bits are assumed to be 0.
Reserved. When read, these bits return zeros.
4.2.19 Memory Limit Register
This read/write register specifies the upper limit of the memory addresses that the XIO3130 forwards
downstream.
PCI register offset:
22h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-10. Bit Descriptions – Memory Limit Register
BIT
FIELD NAME
ACCESS
15:4
MEMLIMIT
rw
3:0
RSVD
r
DESCRIPTION
Memory limit. This field defines the top address of the memory address range used to determine
when to forward memory transactions from one interface to the other. These bits correspond to
address bits [31:20] in the memory address. The lower 20 bits are assumed to be FFFFFh.
Reserved. When read, these bits return zeros.
4.2.20 Pre-fetchable Memory Base Register
This read/write register specifies the lower limit of the pre-fetchable memory addresses that the XIO3130
forwards downstream.
PCI register offset:
24h
Register type:
Read/Write; Read Only
Default value:
0001h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
0
1
43
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-11. Bit Descriptions – Pre-fetchable Memory Base Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:4
PREBASE
rw
Pre-fetchable memory base. This field defines the bottom address of the pre-fetchable memory
address range that is used to determine when to forward memory transactions from one interface
to the other. These bits correspond to address bits [31:20] in the memory address. The lower 20
bits are assumed to be 0. The Pre-fetchable Base Upper 32 Bits register is used to specify the bit
[63:32] of the 64-bit pre-fetchable memory address.
3:0
64BIT
r
64-bit memory indicator. These read-only bits indicate that 64-bit addressing is supported for this
memory window.
4.2.21 Pre-Fetchable Memory Limit Register
This read/write register specifies the upper limit of the pre-fetchable memory addresses that the XIO3130
forwards downstream.
PCI register offset:
26h
Register type:
Read/Write; Read Only
Default value:
0001h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-12. Bit Descriptions – Pre-fetchable Memory Limit Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:4
PRELIMIT
rw
Pre-fetchable memory limit. These bits define the top address of the pre-fetchable memory
address range used to determine when to forward memory transactions from one interface to the
other. These bits correspond to address bits [31:20] in the memory address. The lower 20 bits are
assumed to be FFFFFh. The Pre-fetchable Limit Upper 32 Bits register is used to specify the bit
[63:32] of the 64-bit pre-fetchable memory address.
3:0
64BIT
r
64-bit memory indicator. These read-only bits indicate that 64-bit addressing is supported for this
memory window.
4.2.22 Pre-Fetchable Base Upper 32 Bits Register
This read/write register specifies the upper 32 bits of the Pre-fetchable Memory Base register.
PCI register offset:
28h
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-13. Bit Descriptions – Pre-fetchable Base Upper 32 Bits Register
BIT
31:0
44
FIELD NAME
PREBASE
ACCESS
rw
DESCRIPTION
Pre-fetchable memory base upper 32 bits. This field defines the upper 32 bits of the bottom
address of the pre-fetchable memory address range that is used to determine when to forward
memory transactions downstream.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.2.23 Pre-fetchable Limit Upper 32 Bits Register
This read/write register specifies the upper 32 bits of the Pre-fetchable Memory Limit register.
PCI register offset:
2Ch
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-14. Bit Descriptions – Pre-fetchable Limit Upper 32 Bits Register
BIT
FIELD
NAME
ACCESS
31:0
PRELIMI
T
rw
DESCRIPTION
Pre-fetchable memory limit upper 32 bits. This field defines the upper 32 bits of the top address of the
pre-fetchable memory address range used to determine when to forward memory transactions
downstream.
4.2.24 I/O Base Upper 16 Bits Register
This read/write register specifies the upper 16 bits of the I/O Base register.
PCI register offset:
30h
Register type:
Read/Write
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-15. Bit Descriptions – I/O Base Upper 16 Bits Register
BIT
15:0
FIELD NAME
ACCESS
IOBASE
rw
DESCRIPTION
I/O base upper 16 bits. This field defines the upper 16 bits of the bottom address of the I/O
address range that is used to determine when to forward I/O transactions downstream.
4.2.25 I/O Limit Upper 16 Bits Register
This read/write register specifies the upper 16 bits of the I/O Limit register.
PCI register offset:
32h
Register type:
Read/Write
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-16. Bit Descriptions – I/O Limit Upper 16 Bits Register
BIT
15:0
FIELD NAME
IOLIMIT
ACCESS
rw
DESCRIPTION
I/O limit upper 16 bits. This field defines the upper 16 bits of the top address of the I/O address
range used to determine when to forward I/O transactions downstream.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
45
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.26 Capabilities Pointer Register
This read-only register provides a pointer into the PCI configuration header where the PCI power
management block resides. Since the PCI power management registers begin at 50h, this register is
hardwired to 50h.
PCI register offset:
34h
Register type:
Read only
Default value:
50h
BIT NUMBER
RESET STATE
7
0
6
1
5
0
4
1
3
0
2
0
1
0
0
0
4.2.27 Interrupt Line Register
This read/write register, which is programmed by the system, indicates to the software which interrupt line
the XIO3130 has assigned to it. The default value of this register is FFh, which indicates that an interrupt
line has not yet been assigned to the function. Since the XIO3130 does not generate interrupts internally,
this register is essentially a scratch-pad register; it has no effect on the XIO3130 itself.
PCI register offset:
3Ch
Register type:
Read/Write
Default value:
FFh
BIT NUMBER
RESET STATE
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
1
4.2.28 Interrupt Pin Register
The Interrupt Pin register is read-only 00h, which indicates that the XIO3130 upstream port does not
generate interrupts. The value of this register has no effect on forwarding interrupts from the downstream
ports to the upstream port.
PCI register offset:
3Dh
Register type:
Read Only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.29 Bridge Control Register
The Bridge Control register provides extensions to the Command register that are specific to a bridge.
PCI register offset:
3Eh
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
46
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
XIO3130 Configuration Register Space
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-17. Bit Descriptions – Bridge Control Register
BIT
FIELD NAME
ACCESS
15:12
RSVD
r
Reserved. When read, these bits return zeros.
11
DTSERR
r
Discard timer SERR enable. This bit is hardwired to zero. This bit does not apply to PCI Express.
10
DTSTATUS
r
Discard timer status. This bit is hardwired to zero. This bit does not apply to PCI Express.
9
SEC_DT
r
Secondary discard timer. This bit is hardwired to zero. This bit does not apply to PCI Express.
8
PRI_DEC
r
Primary discard timer. This bit is hardwired to zero. This bit does not apply to PCI Express.
7
FBB_EN
r
Fast back-to-back enable. This bit is hardwired to zero. This bit does not apply to PCI Express.
6
SRST
rw
DESCRIPTION
Secondary bus reset. This bit is set when software wishes to reset all devices downstream of the
XIO3130. Setting this bit causes all of the downstream ports to be reset, and all of the downstream
ports to send a reset via a training sequence.
0 – Downstream ports not in Reset state.
1 – Downstream ports in Reset state.
5
MAM
r
Master abort mode. This bit is hardwired to zero. This bit does not apply to PCI Express.
VGA 16-bit decode. This bit enables the XIO3130 to provide full 16-bit decoding for VGA I/O
addresses. This bit only has meaning if the VGA enable bit is set.
4
VGA16
rw
0 – Ignore address bits [15:10] when decoding VGA I/O addresses.
1 – Decode address bits [15:10] when decoding VGA I/O addresses.
VGA enable. This bit modifies the response by the XIO3130 to VGA-compatible addresses. If this
bit is set, the XIO3130 positively decodes and forwards the following accesses on the primary
interface to the secondary interface (and, conversely, blocks the forwarding of these addresses
from the secondary to primary interface):
• Memory accesses in the range 000A 0000h to 000BFFFFh
• I/O addresses in the first 64 KB of the I/O address space (Address bits [31:16] are 0000h)
and where address bits [9:0] is in the range of 3B0h to 3BBh or 3C0h to 3DFh (inclusive of
ISA address aliases – Address bits [15:10] may possess any value and is not used in the
decoding).
3
VGA
rw
If the VGA Enable bit is set, forwarding of VGA addresses is independent of the value of the ISA
Enable bit (located in the Bridge Control register), the I/O address range and memory address
ranges defined by the I/O Base and Limit registers, the Memory Base and Limit registers, and the
Pre-fetchable Memory Base and Limit registers of the bridge. The forwarding of VGA addresses is
qualified by the I/O Enable and Memory Enable bits in the Command register.
0 – Do not forward VGA-compatible memory and I/O addresses from the primary to secondary
interface (addresses defined above) unless they are enabled for forwarding by the defined
I/O and memory address ranges.
1 – Forward VGA-compatible memory and I/O addresses (addresses defined above) from the
primary interface to the secondary interface (if the I/O Enable and Memory Enable bits are
set) independent of the I/O and memory address ranges and independent of the ISA
Enable bit.
2
ISA
rw
ISA enable. This bit modifies the response by the XIO3130 to ISA I/O addresses. This bit applies
only to I/O addresses that are enabled by the I/O Base and I/O Limit registers and are in the first
64 KB of PCI I/O address space (0000 0000h to 0000 FFFFh). If this bit is set, the bridge blocks
any forwarding from primary to secondary of I/O transactions addressing the last 768 bytes in each
1 KB block. In the opposite direction (secondary to primary), I/O transactions are forwarded if they
address the last 768 bytes in each 1K block.
0 – Forward downstream all I/O addresses in the address range defined by the I/O Base and
I/O Limit registers.
1 – Forward upstream ISA I/O addresses in the address range defined by the I/O Base and I/O
Limit registers that are in the first 64 KB of PCI I/O address space (top 768 bytes of each 1
KB block).
SERR enable. This bit controls forwarding of system error events upstream from the secondary
interface to the primary interface. The XIO3130 forwards system error events when:
• This bit is set.
1
SERR_EN
rw
• The SERR enable bit in the upstream port command register is set.
• SERR is asserted on the secondary interface.
0 – Disable the forwarding of system error events.
1 – Enable the forwarding of system error events.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
47
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-17. Bit Descriptions – Bridge Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
0
PERR_EN
rw
Parity error response enable. It is assumed that the relevant error checking is unnecessary for the
XIO3130’s internal PCI bus; therefore, setting this bit has no effect.
4.2.30 Capability ID Register
This read-only register identifies the linked list item as the register for PCI power management. The
register returns 01h when read.
PCI register offset:
50h
Register type:
Read only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.2.31 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130. This register reads 70h, which points to the MSI Capabilities registers.
PCI register offset:
51h
Register type:
Read only
Default value:
70h
BIT NUMBER
RESET STATE
7
0
6
1
5
1
4
1
3
0
2
0
1
0
0
0
4.2.32 Power Management Capabilities Register
This register indicates the capabilities of the XIO3130 related to PCI power management.
PCI register offset:
52h
Register type:
Read only
Default value:
XX03h
BIT NUMBER
RESET STATE
15
y
14
1
13
1
12
x
11
1
10
1
9
x
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
1
0
1
Table 4-18. Bit Descriptions – Power Management Capabilities Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:11
PME_SUPPORT
r
PME support. This five-bit field indicates the power states from which the (upstream) port may
assert PME. These five bits return a value of 5’by11x1, indicating that the XIO3130 can assert
PME from D0, D2, D3hot, maybe D3cold (i.e., depending on y), and maybe D1 (i.e., depending
on x). The bit defining this for D3cold (i.e., y) is controlled by the AUX_PRSNT bit in the Global
Chip Control register. The bit defining this for D1 (i.e., x) is controlled by the D1_SUPPORT bit in
the Global Switch Control register.
10
D2_SUPPORT
r
D2 device power state support. This bit returns a 1 when read, which indicates that the function
supports the D2 device power state.
r
D1 device power state support. This bit indicates whether the function supports the D1 device
power state. This bit is controlled by the D1_SUPPORT bit in the Global Switch Control register.
The default value x refers to whatever the default value is for the D1_SUPPORT bit in the Global
Switch Control register.
9
48
D1_SUPPORT
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-18. Bit Descriptions – Power Management Capabilities Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
8:6
AUX_CURRENT
r
3.3-VAUX auxiliary current requirements. This field is hardwired to 3’b000. See PCI Power
Management Specification Revision 1.2, Section 3.2.3, Page 26, for mapping this field to specific
current consumption values.
5
DSI
r
Device-specific initialization. This bit returns 0 when read, which indicates that the XIO3130 does
not require special initialization beyond the standard PCI configuration header before a generic
class driver is able to use it.
4
RSVD
r
Reserved. When read, this bit returns zero.
3
PME_CLK
r
PME clock. This bit returns zero, which indicates that the PCI clock is not needed to generate
PME.
2:0
PM_VERSION
r
Power management version. This field returns 3’b011, which indicates Revision 1.2 compatibility.
4.2.33 Power Management Control/Status Register
This register determines and changes the current power state of the XIO3130.
PCI register offset:
54h
Register type:
Read/Write; Read Only
Default value:
0008h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
1
2
0
1
0
0
0
Table 4-19. Bit Descriptions – Power Management Control/Status Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15
PME_STAT
r
PME status. This bit is hardwired to 0b since the XIO3130’s upstream port does not generate
PME regardless of PME_SUPPORT field setting.
14:13
DATA_SCALE
r
Data scale. This 2-bit field returns 0’s when read since the XIO3130 does not use the Data
Register.
12:9
DATA_SEL
r
Data select. This 4-bit field returns 0’s when read since the XIO3130 does not use the Data
Register
8
PME_EN
r
PME enable. This bit enables PME signaling. This bit is hardwired to 0b since the XIO3130’s
upstream port does not generate PME.
7:4
RSVD
r
Reserved. When read, these bits return zeros.
3
NO_SOFT_RST
r
No soft reset. This bit controls whether the transition from D3hot to D0 resets the state
according to the PCI Power Management Specification Revision 1.2. This bit is hardwired to
1’b1.
0 – D3hot to D0 transition causes reset.
1 – D3hot to D0 transition does not cause reset.
2
RSVD
r
Reserved. When read, this bit returns zero.
Power state. This 2-bit field is used both to determine the current power state of the function
and to set the function into a new power state. This field is encoded as follows:
00 = D0
1:0
PWR_STATE
rw
01 = D1
10 = D2
11 = D3hot
See the Power Management section of this document for information about what the XIO3130
does in these different power states.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
49
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.34 Power Management Bridge Support Extension Register
This read-only register is used to indicate to host software the state of the secondary bus when the
XIO3130 is placed in D3.
PCI register offset:
56h
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-20. Bit Descriptions – PM Bridge Support Extension Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
7
BPCC
r
Bus power/Clock control enable. This bit is read-only zero. This bit does not apply to PCI
Express.
6
BSTATE
r
B2/B3 support. This bit is read-only zero. This bit does not apply to PCI Express.
5:0
RSVD
r
Reserved. When read, these bits return zeros.
4.2.35 Power Management Data Register
This read-only register is not applicable to the XIO3130 and returns 00h when read.
PCI register offset:
57h
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.36 MSI Capability ID Register
This read-only register identifies the linked list item as the register for Message Signaled Interrupts (MSI)
Capabilities. The register returns 05h when read.
PCI register offset:
70h
Register type:
Read only
Default value:
05h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
1
1
0
0
1
4.2.37 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130. This register reads 80h, which points to the Subsystem ID and Subsystem Vendor ID
Capabilities registers.
50
PCI register offset:
71h
Register type:
Read only
Default value:
80h
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
BIT NUMBER
RESET STATE
7
1
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.38 MSI Message Control Register
This register is used to control the sending of MSI messages.
PCI register offset:
72h
Register type:
Read/Write; Read Only
Default value:
0080h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
1
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-21. Bit Descriptions – MSI Message Control Register
BIT
FIELD NAME
ACCESS
15:8
RSVD
r
Reserved. When read, these bits return zeros.
DESCRIPTION
7
64CAP
r
64-bit message capability. This bit is read-only 1, which indicates that the XIO3130 supports 64-bit
MSI message addressing.
Multiple message enable. This bit indicates the number of distinct messages that the XIO3130 is
allowed to generate.
000 – 1 Message
001 – 2 Messages
010 – 4 Messages
6:4
MM_EN
rw
011 – 8 Messages
100 – 16 Messages
101 – 32 Messages
110 – Reserved
111 – Reserved
3:1
MM_CAP
Multiple message capabilities. This field indicates the number of distinct messages that the
XIO3130 is capable of generating. This field is read-only 000, which indicates that the XIO3130
can signal one interrupt.
r
MSI enable. This bit is used to enable MSI interrupt signaling. MSI signaling must be enabled by
software for the XIO3130 to send MSI messages.
0
MSI_EN
rw
0 – MSI signaling is prohibited.
1 – MSI signaling is enabled.
4.2.39 MSI Message Address Register
This register contains the lower 32 bits of the address that a MSI message shall be written to when an
interrupt is to be signaled.
PCI register offset:
74h
Register type:
Read/Write; Read Only
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
51
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-22. Bit Descriptions – MSI Message Address Register
BIT
FIELD NAME
ACCESS
31:2
ADDRESS
rw
1:0
RSVD
r
DESCRIPTION
System Specified Message Address.
Reserved. When read, these bits return zeros.
4.2.40 MSI Message Upper Address Register
This register contains the upper 32 bits of the address that a MSI message shall be written to when an
interrupt is to be signaled. If this register is 0000 0000h, 32-bit addressing is used; otherwise, 64-bit
addressing is used.
PCI register offset:
78h
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
PCI register offset:
56h
Register type:
Read only
Default value:
00h
4.2.41 MSI Message Data Register
This register contains the data that software programmed the device to send when it sends a MSI
message.
PCI register offset:
7Ch
Register type:
Read/Write
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-23. Bit Descriptions – MSI Data Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:4
MSG
rw
System-specific message. This field contains the portion of the message that the XIO3130 can
never modify.
3:0
MSG_NUM
rw
Message number. This portion of the message field may be modified to contain the message
number if multiple messages are enabled. Since the XIO3130 only generates one MSI type,
these bits are not modified by XIO3130 hardware.
4.2.42 Capability ID Register
This read-only register identifies the linked list item as the register for Subsystem ID and Subsystem
Vendor ID Capabilities. The register returns 0Dh when read.
52
PCI register offset:
80h
Register type:
Read only
Default value:
0Dh
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
1
2
1
1
0
0
1
4.2.43 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130. This register reads 90h, which points to the PCI Express Capabilities registers.
PCI register offset:
81h
Register type:
Read only
Default value:
90h
BIT NUMBER
RESET STATE
7
1
6
0
5
0
4
1
3
0
2
0
1
0
0
0
4.2.44 Subsystem Vendor ID Register
This register, which is used for system and option card identification purposes, may be required for certain
operating systems. This read-only register is a direct reflection of the Subsystem Access register, which is
read/write and is initialized through the EEPROM (if present).
PCI register offset:
84h
Register type:
Read only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.45 Subsystem ID Register
This register, which is used for system and option card identification purposes, may be required for certain
operating systems. This read-only register is a direct reflection of the Subsystem Access register, which is
read/write and is initialized through the EEPROM (if present).
PCI register offset:
86h
Register type:
Read only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.46 PCI Express Capability ID Register
This read-only register identifies the linked list item as the register for PCI Express Capabilities. The
register returns 10h when read.
PCI register offset:
90h
Register type:
Read only
Default value:
10h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
1
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
53
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.47 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130. This register reads 00h, which indicates that no additional capabilities are supported.
PCI register offset:
91h
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.48 PCI Express Capabilities Register
This register indicates the capabilities of the upstream port of the XIO3130 related to PCI Express.
PCI register offset:
92h
Register type:
Read only
Default value:
0051h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
1
5
0
4
1
3
0
2
0
1
0
0
1
Table 4-24. Bit Descriptions – PCI Express Capabilities Register
BIT
FIELD NAME
ACCESS
15:14
RSVD
r
Reserved. When read, these bits return zeros.
DESCRIPTION
13:9
INT_NUM
r
Interrupt message number. This field is used for MSI support and is implemented as read-only
zero in the XIO3130.
8
SLOT
r
Slot implemented. This bit is invalid for the upstream port on the XIO3130 and is read-only
zero.
7:4
DEV_TYPE
r
Device/Port type. This read-only field returns 0101b, which indicates that the device is an
upstream port of a PCI Express XIO3130.
3:0
VERSION
r
Capability version. This field returns 0001b, which indicates revision 1 of the PCI Express
capability.
4.2.49 Device Capabilities Register
The Device Capabilities register indicates the device-specific capabilities of the XIO3130.
54
PCI register offset:
94h
Register type:
Read Only; Hardware Update
Default value:
0000 8001h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
1
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-25. Bit Descriptions – Device Capabilities Register
BIT
FIELD NAME
ACCESS
31:28
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
Captured slot power limit scale. The value in this register is programmed by the host by issuing
a Set_Slot_Power_Limit Message. When a Set_Slot_Power_Limit Message is received, bits 9:8
are written to this field. The value in this register specifies the scale used for the Slot Power
Limit.
27:26
CSPLS
ru
00 – 1.0x
01 – 0.1x
10 – 0.01x
11 – 0.001x
25:18
CSPLV
ru
Captured slot power limit value. The value in this register is programmed by the host by issuing
a Set_Slot_Power_Limit Message. When a Set_Slot_Power_Limit Message is received, bits 7:0
are written to this field. The value in this register, in combination with the Slot power limit scale
value, specifies the upper limit of power supplied to the slot. The power limit is calculated by
multiplying the value in this field by the value in the Slot power limit scale field.
17:16
RSVD
r
Reserved. When read, these bits return zeros.
15
RBER
r
Role-based error reporting. This field is set to 1b to indicate support for role-based error
reporting.
14:6
RSVD
r
Reserved. When read, these bits return zeros.
5
ETFS
r
Extended tag field supported. This field indicates the size of the tag field supported. This bit is
hardwired to zero, indicating support for 5-bit tag fields.
4:3
PFS
r
Phantom functions supported. This field is read-only 00b, indicating that function numbers are
not used for phantom functions.
2:0
MPSS
r
Max payload size supported. This field indicates the maximum payload size that the device can
support for TLPs. This field is encoded as 001b, which indicates that the maximum payload size
for a TLP is 256 bytes.
4.2.50 Device Control Register
The Device Control register controls PCI Express device-specific parameters.
PCI register offset:
98h
Register type:
Read/Write; Read Only
Default value:
2000h
BIT NUMBER
RESET STATE
15
0
14
0
13
1
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-26. Bit Descriptions – Device Control Register
BIT
FIELD NAME
ACCESS
15
RSVD
r
DESCRIPTION
Reserved. When read, this bit returns zero.
Max read request size. This field is programmed by the host software to set the maximum size
of a read request that the XIO3130 can generate. The XIO3130 uses this field in conjunction
with the cache line size register to determine how much data to fetch on a read request. This
field is encoded as:
000 – 128B
001 – 256B
14:12
MRRS
rw
010 – 512B
011 – 1024B
100 – 2048B
101 – 4096B
110 – Reserved
111 – Reserved
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
55
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-26. Bit Descriptions – Device Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
11
ENS
r
Enable no snoop. Since the XIO3130 does not initiate such transactions, this bit is read-only
zero.
10
APPE
r
Auxiliary power PM enable. This bit is read-only zero, since the XIO3130 requires a minimal
amount of AUX power when PME is disabled.
9
PFE
r
Phantom function enable. Since the XIO3130 part does not support phantom functions, this bit
is read-only zero.
8
ETFE
r
Extended tag field enable. Since the XIO3130 part does not support extended tags, this bit is
read-only zero.
Max payload size. This field is programmed by the host software to set the maximum size of
posted writes or read completions that the XIO3130 can initiate. This field is encoded as:
000 – 128B
001 – 256B
010 – 512B
7:5
MPS
rw
011 – 1024B
100 – 2048B
101 – 4096B
110 – Reserved
111 – Reserved
4
3
ERO
Enable relaxed ordering. Since the XIO3130 part does not support relaxed ordering, this bit is
read-only zero.
r
URRE
Unsupported request reporting enable. If this bit is set, the XIO3130 is enabled to send
ERR_NONFATAL messages to the root complex when an unsupported request is received by
the upstream port.
rw
0 – Do not report unsupported requests to the root complex.
1 – Report unsupported requests to the root complex.
Fatal error reporting enable. If this bit is set, the XIO3130 is enabled to send ERR_FATAL
messages to the root complex when a system error event occurs.
2
FERE
rw
0 – Do not report fatal errors to the root complex.
1 – Report fatal errors to the root complex.
Nonfatal error reporting enable. If this bit is set, the XIO3130 is enabled to send
ERR_NONFATAL messages to the root complex when a system error event occurs.
1
NFERE
rw
0 – Do not report nonfatal errors to the root complex.
1 – Report nonfatal errors to the root complex.
Correctable error reporting enable. If this bit is set, the XIO3130 is enabled to send
ERR_CORR messages to the root complex when a system error event occurs.
0
CERE
rw
0 – Do not report correctable errors to the root complex.
1 – Report correctable errors to the root complex.
4.2.51 Device Status Register
The Device Status register controls PCI Express device-specific parameters.
PCI register offset:
9Ah
Register type:
Read Only; Clear by a Write of One; Hardware Update
Default value:
00X0h
BIT NUMBER
RESET STATE
56
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
XIO3130 Configuration Register Space
6
0
5
0
4
x
3
0
2
0
1
0
0
0
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-27. Bit Descriptions – Device Status Register
BIT
FIELD NAME
ACCESS
15:6
RSVD
r
Reserved. When read, these bits return zeros.
DESCRIPTION
5
PEND
ru
Transaction PENDING. This bit is set when the XIO3130 has issued a non-posted transaction
that has not been completed yet.
AUX power detected. This bit indicates that AUX power is present. This bit is a direct reflection
of the AUX_PRSNT bit in the Global Chip Control register and has the same default value.
4
APD
ru
0 – No AUX power detected.
1 – AUX power detected.
3
URD
rcu
Unsupported request detected. This bit is asserted when a request is received that results in
sending a completion with an Unsupported Request status). Errors are logged in this bit
regardless of whether error reporting is enabled in the Device Control register.
2
FED
rcu
Fatal error detected. This bit is set by the XIO3130 when a fatal error is detected. Errors are
logged in this bit regardless of whether error reporting is enabled in the Device Control register.
1
NFED
rcu
Nonfatal error detected. This bit is set by the XIO3130 when a nonfatal error is detected. Errors
are logged in this bit regardless of whether error reporting is enabled in the Device Control
register.
0
CED
rcu
Correctable error detected. This bit is set by the XIO3130 when a correctable error is detected.
Errors are logged in this bit regardless of whether error reporting is enabled in the Device
Control register.
4.2.52 Link Capabilities Register
The Link Capabilities register indicates the link-specific capabilities of the device.
PCI register offset:
9Ch
Register type:
Read only
Default value:
000X XX11h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
1
17
y
16
y
BIT NUMBER
RESET STATE
15
y
14
z
13
z
12
z
11
x
10
1
9
0
8
0
7
0
6
0
5
0
4
1
3
0
2
0
1
0
0
1
Table 4-28. Bit Descriptions – Link Capabilities Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
31:24
PORT_NUM
r
Port number. This field indicates the port number for the PCI Express link. This field is
read-only zero.
23:19
RSVD
r
Reserved. When read, these bits return zeros.
18
CLK_PM
r
Clock power management. This field is read-only 1b, which indicates that CLKREQ is
supported on the upstream port.
r
L1 exit latency. This field indicates the time that it takes to transition from the L1 state to the
L0 state. This field is a direct reflection of the Upstream Port Link PM Latency register
L1_EXIT_LAT field, which is a read/write field that is loaded from EEPROM (if present). The
default value of this field, yyy, is the same as the default value of the Link PM Latency
register L1_EXIT_LAT field.
r
L0s exit latency. This field indicates the time that required to transition from the L0s state to
the L0 state. This field is a direct reflection of the Upstream Port Link PM Latency register
L0S_EXIT_LAT field, which is a read/write field that is loaded from EEPROM (if present).
The default value of this field, zzz, is the same as the default value of the Link PM Latency
register L0S_EXIT_LAT field.
r
Active state link PM support. This field reads either 01b or 11b, which indicates that the
device supports L0s and may or may not support ASPM-based L1 for Active State Link PM.
ASPM-based L1 support is controlled by the ASPM_L1_EN field in the Global Chip Control
register.
17:15
14:12
11:10
L1_LATENCY
L0S_LATENCY
ASLPMS
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
57
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-28. Bit Descriptions – Link Capabilities Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
9:4
MLW
r
Maximum link width. This field is encoded 000001b to indicate that the device only supports
an x1 PCI Express link.
3:0
MLS
r
Maximum link speed. This field is encoded 0001b to indicate that the device supports a
maximum link speed of 2.5 Gb/s.
4.2.53 Link Control Register
The Link Control register is used to control link-specific behavior.
PCI register offset:
A0h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-29. Bit Descriptions – Link Control Register
BIT
FIELD NAME
ACCESS
15:9
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
Clock power management enable. When CLKREQ support is enabled, the EP_LI_LAT field in
the Upstream Ports Link PM Latency register increases due to link PLL locking requirements.
8
CPM_EN
rw
0 – Disable CLKREQ on upstream port
1 – Enable CLKREQ on upstream port
Extended synch. This bit is used to force the device to extend the transmission of FTS ordered
sets and an extra TS2 when exiting from L1 before entering to L0.
7
ES
rw
0 – Normal synch
1 – Extended synch
Common clock configuration. This bit is set when a common clock is provided to both ends of
the PCI Express link. This bit can be used to change the L0s and L1 exit latencies.
6
CCC
rw
0 – Reference clock is asynchronous.
1 – Reference clock is synchronous.
5
RL
r
Retrain link. This bit has no function for upstream ports and is read-only zero.
4
LD
r
Link disable. This bit has no function for upstream ports and is read-only zero.
r
Read completion boundary. This bit specifies the minimum size read completion packet that the
XIO3130 can send when breaking a read request into multiple completion packets. This field is
not applicable to XIO3130 switches; i.e., the XIO3130 does not break up completion packets
and is hardwired to zero.
3
RCB
0 – 64 bytes
1 – 128 bytes
2
RSVD
r
Reserved. When read, this bit returns zero.
Active state link PM control. This field is used to enable and disable active state PM.
00 – Active state PM disabled
1:0
ASLPMC
rw
01 – L0s entry enabled
10 – Reserved
11 – L0s and L1 entry enable
58
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.2.54 Link Status Register
The Link Status register indicates the current state of the PCI Express Link.
PCI register offset:
A2h
Register type:
Read only
Default value:
1X11h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
1
11
0
10
x
9
0
8
0
7
0
6
0
5
0
4
1
3
0
2
0
1
0
0
1
Table 4-30. Bit Descriptions – Link Status Register
BIT
FIELD NAME
ACCESS
15:13
RSVD
r
Reserved. When read, these bits return zeros.
DESCRIPTION
12
SCC
r
Slot clock configuration. This bit reflects the reference clock configurations and is read-only 1,
indicating that a 100 MHz common clock reference is used.
11
LT
r
Link training in progress. This bit has no function for upstream ports and is read-only zero.
10
UNDEF
r
Undefined. The value read from this bit is undefined.
9:4
NLW
r
Negotiated link width. This field is read-only 000001b, which indicates that the lane width is x1.
3:0
LS
r
Link speed. This field is read-only 0001b, which indicates that the link speed is 2.5Gb/s.
4.2.55 Serial Bus Data Register
The Serial Bus Data register is used to read and write data on the serial bus interface, e.g., for use with a
serial EEPROM. When writing data to the serial bus, this register must be written before writing to the
Serial Bus Address register to initiate the cycle. When reading data from the serial bus, this register
contains the data read after the REQBUSY (bit 5 Serial Bus Control register) bit is cleared. This register is
reset with PERST.
PCI register offset:
B0h
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.56 Serial Bus Index Register
The value written to the Serial Bus Index register represents the byte address of the byte being read or
written from the serial bus device. The Serial Bus Index register must be written before initiating a serial
bus cycle by writing to the Serial Bus Slave Address register. This register is reset with PERST.
PCI register offset:
B1h
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
59
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.57 Serial Bus Slave Address Register
The Serial Bus Slave Address register is used to indicate the address of the device being targeted by the
serial bus cycle. This register also indicates whether the cycle will be a read or a write cycle. Writing to
this register initiates the cycle on the serial interface. This register is reset with PERST. The default value
corresponds to a serial EEPROM slave address of 7’b101_0000.
PCI register offset:
B2h
Register type:
Read/Write
Default value:
A0h
BIT NUM BER
RESET STATE
7
1
6
0
5
1
4
0
3
0
2
0
1
0
0
0
Table 4-31. Bit Descriptions – Serial Bus Slave Address Register
BIT
7:1
FIELD NAME
ACCESS
SLAVE_ADDR
DESCRIPTION
Serial bus slave address. This bit field represents the slave address for a read/write transaction
on the serial interface.
rw
This field is reset with PERST.
Read/Write command. This bit is used to determine whether the serial bus cycle is a read or a
write cycle.
0
RW_CMD
0 – A single byte write is requested.
rw
1 – A single byte read is requested.
This field is reset with PERST.
4.2.58 Serial Bus Control and Status Register
The Serial Bus Control and Status register is used to control the behavior of the serial bus interface. This
register also provides status information about the state of the serial bus.
PCI register offset:
B3h
Register type:
Read/Write; Read Only; Clear by a Write of One; Hardware Update
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-32. Bit Descriptions – Serial Bus Control and Status Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
Protocol select. This bit is used to select the serial bus address mode used.
7
PROT_SEL
rw
0 – Slave address and byte address are sent on the serial bus.
1 – Only the slave address is sent on the serial bus.
This field is reset with PERST.
6
RSVD
r
Reserved. When read, this bit returns zero.
Requested serial bus access busy. This bit is set when a serial bus cycle is in progress.
5
REQBUSY
ru
0 – No serial bus cycle
1 – Serial bus cycle in progress
This field is reset with PERST.
60
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-32. Bit Descriptions – Serial Bus Control and Status Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
Serial EEPROM access busy. This bit is set when the serial EEPROM circuitry in the XIO3130
device is downloading register defaults from a serial EEPROM.
4
ROMBUSY
0 – No EEPROM activity
ru
1 – EEPROM download in progress
This field is reset with PERST.
Serial EEPROM detected. This bit is automatically set when a serial EEPROM is detected via
the strapping option. For more information on strapping options, see section 1.9.1. The value
of this bit is used to enable the serial bus interface and to control whether the EEPROM load
occurs. Note that a serial EEPROM is only detected once following PERST or GRST.
0 – No EEPROM present, EEPROM load process does not occur.
3
SBDETECT
rwu
1 – EEPROM present, EEPROM load process occurs.
Note that even if a serial EERPOM is not detected following PERST, system software can still
set this bit to enable the serial bus interface. For more information on system software setting
the bit, see section 1.9.4.
This field is reset with PERST.
2
RSVD
r
Reserved. When read, this bit returns zero.
Serial bus error. This bit is set when an error occurs during a software-initiated serial bus
cycle.
1
SB_ERR
0 – No error
rc
1 – Serial bus error
This field is reset with PERST.
Serial EEPROM load error. This bit is set when an error occurs while downloading registers
from a serial EEPROM.
0
ROM_ERR
0 – No error
rc
1 – EEPROM load error
This field is reset with PERST.
4.2.59 Upstream Port Link PM Latency Register
This read/write register is used to program L0s and L1 exit latencies for the upstream port.
PCI register offset:
B4h
Register type:
Read/Write; Read Only; Clear by a Write of One; Hardware Update
Default value:
0024h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
1
4
0
3
0
2
1
1
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
0
0
61
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-33. Bit Descriptions – Upstream Port Link PM Latency Register
BIT
FIELD NAME
ACCESS
15:14
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
Endpoint L0s acceptable latency. This field is used to program the maximum acceptable
latency when exiting the L0s state. This field is used to set the L0s Acceptable Latency field in
the Device Capabilities register.
000 – Less than 64 ns (default)
001 – 64 ns up to less than 128 ns
010 – 128 ns up to less than 256 ns
13:11
EP_L0S_LAT
rw
011 – 256 ns up to less than 512 ns
100 – 512 ns up to less than 1 ms
101 – 1 ms up to less than 2 ms
110 – 2 ms to 4 ms
111 – More than 4 ms
This field is loaded from EEPROM (when present) and reset with PERST.
Endpoint L1 acceptable latency. This field is used to program the maximum acceptable latency
when exiting the L1 state. This field is used to set the L1 Acceptable Latency field in the Device
Capabilities register.
000 – Less than 1 ms (default)
001 – 1 ms up to less than 2 ms
010 – 2 ms up to less than 4 ms
10:8
EP_L1_LAT
rw
011 – 4 ms up to less than 8 ms
100 – 8 ms up to less than 16 ms
101 – 16 ms up to less than 32 ms
110 – 32 ms to 64 ms
111 – More than 64 ms
This field is loaded from EEPROM (when present) and reset with PERST.
7:6
RSVD
r
Reserved. When read, these bits return zeros.
L0s exit latency. This field is used to program the maximum latency for the PHY to exit the L0s
state. This field is used to set the L0s Exit Latency field in the Link Capabilities register.
000 – Less than 64 ns
001 – 64 ns up to less than 128 ns
010 – 128 ns up to less than 256 ns
011 – 256 ns up to less than 512 ns
100 – 512 ns up to less than 1 ms (default)
101 – 1 ms up to less than 2 ms
5:3
L0S_EXIT_LAT
rw
110 – 2 ms to 4 ms
111 – More than 4 ms
Define writtenBySW to default to false, be set to true whenever the software or serial EEPROM
writes this field to a value that is different from its current state, and can only be subsequently
set to false as a result of a reset. When writtenBySW is false, this field is set to 011b when the
CCC bit in the Link Control register is asserted (i.e., common clock mode) and set to 100b
when the CCC bit is de-asserted (i.e., non-common clock mode). When writtenBySW is true,
this field is the value that was last written by the software.
This field is loaded from EEPROM (when present) and reset with PERST.
This field may be programmed differently depending on the values programmed in the
DEFER_L_EXIT and SMART_L_EXIT fields in the Global Switch Control register.
62
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-33. Bit Descriptions – Upstream Port Link PM Latency Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
L1 exit latency. This field is used to program the maximum latency for the PHY to exit the L1
state. This field is used to set the L1 Exit Latency field in the Link Capabilities register.
000 – Less than 1 ms
001 – 1 ms up to less than 2 ms
010 – 2 ms up to less than 4 ms
011 – 4 ms up to less than 8 ms
100 – 8 ms up to less than 16 ms (default)
2:0
L1_EXIT_LAT
101 – 16 ms up to less than 32 ms
rw
110 – 32 ms to 64 ms
111 – More than 64 ms
Define writtenBySW to default to false, be set to true when the software or serial EEPROM
writes this field to a value that is different from its current state, and can only be subsequently
set to false as a result of a reset. When writtenBySW is false, this field is set to 100b. When
writtenBySW is true, this field is the value last written by the software.
This field is loaded from EEPROM (when present) and reset with PERST.
This field may be programmed differently depending on the values programmed in the
DEFER_L_EXIT and SMART_L_EXIT fields in the Global Switch Control register.
4.2.60 Global Chip Control Register
This read/write register is used to control various functionalities across the entire device.
PCI register offset:
B8h
Register type:
Read/Write; Read Only; Hardware Update; Sticky
Default value:
0000 000Xh
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
x
Table 4-34. Bit Descriptions – Global Chip Control Register
BIT
FIELD NAME
ACCESS
31
RSVD
r
DESCRIPTION
Reserved. When read, this bit returns zero.
ASPM-based L1 PLL disable. This bit enables or disables PLL during ASPM-based L1 for
all PHYs on the XIO3130. This setting does not affect D-state-based L1, for which PLLs
must be shut off during L1.
30
ASPM_L1_PLL_DIS
rw
0 – Enable PLL during ASPM-based L1.
1 – Disable PLL during ASPM-based L1.
This field is loaded from EEPROM (when present) and reset with PERST.
ASPM-based L1 enable. This bit enables ASPM-based L1 on the PCI Express chip-level
upstream port. This field controls whether the ASPM Support field in the Link Capabilities
register reports support for ASPM-based L1 for all functions in a multifunction device.
29
ASPM_L1_EN
rw
0 – Disable ASPM based L1.
1 – Enable ASPM based L1.
This field is loaded from EEPROM (when present) and reset with PERST.
28
RSVD
rw
27:22
RSVD
r
This bit is a reserved diagnostic bit and must be set to 0 for proper operation. If an
EEPROM is used, the corresponding bit in the EEPROM must be set to 0.
Reserved. When read, these bits return zeros.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
63
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-34. Bit Descriptions – Global Chip Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
Minimum power scale. This value is programmed to indicate the scale of the Minimum
Power Value field.
00 – 1.0x
21:20
MIN_POWER_SCA
LE
01 – 0.1x
rw
10 – 0.01x
11 – 0.001x
This field is loaded from EEPROM (when present) and reset with PERST.
19:12
MIN_POWER_VAL
UE
Minimum power value. This value is programmed to indicate the minimum power
requirements for all circuitry powered by a slot, and is not applicable for motherboard
down applications (i.e., must be programmed to zero in that case). This value is multiplied
by the Minimum Power Scale field. When the value is non-zero, the resultant power figure
is compared against information conveyed in Set_Slot_Power_Limit Messages received
on the upstream port. When the value is zero, the comparison is ignored as if there is no
power limit.
rw
This field is loaded from EEPROM (when present) and reset with PERST.
Power override. This field is used to determine how the device responds when the slot
power limit (via Set_Slot_Power_Limit Message received) is greater than the amount of
power programmed in the MIN_SLOT_POWER field of this register. This power
comparison is disabled when the MIN_SLOT_POWER field of the register is zero.
00 – Ignore slot power limit.
11:10
PWR_OVRD
01 – Assert the PWR_OVER pin.
rw
10 – Assert the PWR_OVER pin and respond with Unsupported request to all transactions
except configuration transactions (Type 0 or Type 1) and Set_Slot_Power_Limit
Messages.
11 – Reserved
This field is loaded from EEPROM (when present) and reset with PERST.
9:3
RSVD
r
Reserved. When read, these bits return zeros.
Wake or beacon. This bit controls whether wake events are signaled using the WAKE pin
or a beacon transmission.
2
WAKE_OR_BCN
0 – Beacon mode.
rwh
1 – WAKE mode.
This field is reset with GRST and is loaded from EEPROM (when present).
Wake to beacon enable. This bit enables externally generated wake events detected on
the WAKE pin to cause a beacon to be transmitted. This field is ignored if
WAKE_OR_BCN is set to WAKE mode.
1
WAKE2BCN
rwh
0 – WAKE input to beacon translation disabled.
1 – WAKE input to beacon translation enabled.
This field is reset with GRST and is loaded from EEPROM (when present).
0
AUX_PRSNT
AUX power present. This bit reflects the state of a 3.3-VAUX presence detection circuit
output in the PCI Express reference macro. This bit controls the AUX Power Detected bit
in the Device Status register (i.e., whether AUX power is present) for all ports.
ru
0 – AUX power is not present.
1 – AUX power is present.
4.2.61 GPIO A Control Register
This register is used to control the function of the PCIE_GPIO 0 – 4 pins.
64
PCI register offset:
BCh
Register type:
Read/Write; Read Only; Hardware Update; Sticky
Default value:
0000h
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-35. Bit Descriptions – GPIO A Control Register
BIT
FIELD NAME
ACCESS
15
RSVD
r
DESCRIPTION
Reserved. Reads back zero.
GPIO 4 Control. This field controls the GPIO4 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ACT_BTN0
011 – Port 3 ACT_BTN2
100 – Port 1 PWRFLT0
101 – Port 3 PWRFLT2
14:12
PCIE_GPIO4_CTL
rw
110 – Port 1 EMIL_ENG0
111 – Port 3 EMIL_ENG2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If the DN2_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO4 terminal
is directly mapped as the PRESENT PCI Hot Plug terminal for port 3 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
GPIO 3 Control. This field controls the GPIO3 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 CLKREQ0
011 – Port 1 MRLS_DET0
11:9
PCIE_GPIO3_CTL
rw
100 – Port 2 PWRFLT1
101 – Port 3 PWRFLT2
110 – Port 2 MRLS_DET1
111 – Port 3 MRLS_DET2,
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
GPIO 2 Control. This field controls the GPIO2 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 2 ACT_BTN1
011 – Port 3 ACT_BTN2
100 – Port 2 PWRFLT1
101 – Port 3 PWRFLT2
8:6
PCIE_GPIO2_CTL
rw
110 – Port 2 MRLS_DET1
111 – Port 3 MRLS_DET2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If the DN1_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO2 terminal
is directly mapped as the PWR_GOOD PCI Hot Plug terminal for port 2 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
65
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-35. Bit Descriptions – GPIO A Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
GPIO 1 Control. This field controls the GPIO1 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 2 EMIL_CTL1
011 – Port 3 EMIL_CTL2
100 – Port 2 ATN_LED1
101 – Port 3 ATN_LED2
5:3
PCIE_GPIO1_CTL
rw
110 – Port 2 PWR_LED1
111 – Port 3 PWR_LED2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If the DN1_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO1 terminal
is directly mapped as the PWR_ON PCI Hot Plug terminal for port 2 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
GPIO 0 Control. This field controls the GPIO0 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 2 ACT_BTN1
011 – Port 3 ACT_BTN2
100 – Port 2 PWRFLT1
101 – Port 3 PWRFLT2
2:0
PCIE_GPIO0_CTL
rw
110 – Port 2 EMIL_ENG1
111 – Port 3 EMIL_ENG2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If the DN1_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO1 terminal
is directly mapped as the PWR_ON PCI Hot Plug terminal for port 2 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
4.2.62 GPIO B Control Register
This register is used to control the function of the PCIE_GPIO 5 – 9 pins.
PCI register offset:
BEh
Register type:
Read/Write
Default value:
0000h
BIT NUMBER
RESET STATE
66
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
XIO3130 Configuration Register Space
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-36. Bit Descriptions – GPIO B Control Register
BIT
FIELD NAME
ACCESS
15
RSVD
r
DESCRIPTION
Reserved, reads back zero
GPIO 9 Control. This field controls the GPIO9 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 EMIL_CTL0
011 – Port 2 EMIL_CTL2
100 – Port 1 ATN_LED0
101 – Port 2 ATN_LED1
14:12
PCIE_GPIO9_CTL
rw
110 – Port 1 PWR_LED0
111 – Port 2 PWR_LED1
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If the DN3_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO9 terminal
is directly mapped as the PWR_ON PCI Hot Plug terminal for port 3 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
GPIO 8 Control. This field controls the GPIO8 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ACT_BTN0
011 – Port 2 ACT_BTN1
100 – Port 1 PWRFLT0
101 – Port 2 PWRFLT1
11:9
PCIE_GPIO8_CTL
rw
110 – Port 1 EMIL_ENG0
111 – Port 2 EMIL_ENG1
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If the DN3_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO8 terminal
is directly mapped as the PRESENT PCI Hot Plug terminal for port 3 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
GPIO 7 Control. This field controls the GPIO7 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 2 CLKREQ1
011 – Port 2 MRLS_DET1
8:6
PCIE_GPIO7_CTL
rw
100 – Port 1 PWRFLT0
101 – Port 3 PWRFLT2
110 – Port 1 MRLS_DET0
111 – Port 3 MRLS_DET2,
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
67
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-36. Bit Descriptions – GPIO B Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
GPIO 6 Control. This field controls the GPIO6 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ACT_BTN0
011 – Port 3 ACT_BTN2
100 – Port 1 PWRFLT0
101 – Port 3 PWRFLT2
5:3
PCIE_GPIO6_CTL
110 – Port 1 MRLS_DET0
rw
111 – Port 3 MRLS_DET2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If DPSTRP[1] == 1, this bit field is read only and reads back zero.
If the DN2_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO6 terminal
is directly mapped as the PWR_GOOD PCI Hot Plug terminal for port 3 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
GPIO 5 Control. This field controls the GPIO5 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 EMIL_CTL0
011 – Port 3 EMIL_CTL2
100 – Port 1 ATN_LED0
101 – Port 3 ATN_LED2
2:0
PCIE_GPIO5_CTL
110 – Port 1 PWR_LED0
rw
111 – Port 3 PWR_LED2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If DPSTRP[1] == 1, this bit field is read only and reads back zero.
If the DN2_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO5 terminal
is directly mapped as the PWR_ON PCI Hot Plug terminal for port 3 and is no longer
available for use as a GPIO. In this situation these bits have no meaning and should be left
at their default value.
4.2.63 GPIO C Control Register
This register is used to control the function of the PCIE_GPIO 10 – 13 pins.
PCI register offset:
C0h
Register type:
Read/Write; Sticky
Default value:
0000h
BIT NUMBER
RESET STATE
68
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
XIO3130 Configuration Register Space
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-37. Bit Descriptions – GPIO C Control Register
BIT
FIELD NAME
ACCESS
15
RSVD
r
DESCRIPTION
Reserved. Reads back zero.
GPIO 14 Control. This field controls the GPIO14 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ACT_LED0
011 – Port 2 ACT_LED1
14:12
PCIE_GPIO14_CTL
rw
100 – Port 3 ACT_LED2
101 – Port 1 PWR_LED0
110 – Port 2 PWR_LED1
111 – Port 3 PWRFLT2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
GPIO 12 Control. This field controls the GPIO12 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ACT_LED0
011 – Port 2 ACT_LED1
11:9
PCIE_GPIO13_CTL
rw
100 – Port 3 ACT_LED2
101 – Port 1 ATN_LED0
110 – Port 2 PWR_LED1
111 – Port 3 PWR_LED2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
GPIO 12 Control. This field controls the GPIO12 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ACT_LED0
011 – Port 2 ACT_LED1
8:6
PCIE_GPIO12_CTL
rw
100 – Port 3 ACT_LED2
101 – Port 1 PWR_LED0
110 – Port 2 ATN_LED1
111 – Port 3 ATN_LED2
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
GPIO 11 Control. This field controls the GPIO11 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 3 CLKREQ2
011 – Port 3 MRLS_DET2
5:3
PCIE_GPIO11_CTL
rw
100 – Port 1 PWRFLT0
101 – Port 2 PWRFLT1
110 – Port 1 MRLS_DET0
111 – Port 2 MRLS_DET1,
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
69
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-37. Bit Descriptions – GPIO C Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
GPIO 10 Control. This field controls the GPIO10 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ACT_BTN0
011 – Port 2 ACT_BTN1
100 – Port 1 PWRFLT0
101 – Port 2 PWRFLT1
2:0
PCIE_GPIO10_CTL
rw
110 – Port 1 MRLS_DET0
111 – Port 2 MRLS_DET1
See GPIO Data register for a detailed description of this field.
This field is loaded from EEPROM (if present), and reset with FRST.
If the DN3_DPSTRP terminal is pulled high at the de-assertion of reset, the GPIO10
terminal is directly mapped as the PWR_GOOD PCI Hot Plug terminal for port 3 and is no
longer available for use as a GPIO. In this situation these bits have no meaning and should
be left at their default value.
4.2.64 GPIO D Control Register
This register is used to control the function of the PCIE_GPIO 15–19 pins.
70
PCI register offset:
C2h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-38. Bit Descriptions – GPIO D Control Register
BIT
FIELD NAME
ACCESS
15:10
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
GPIO 18 Control. This field controls the GPIO18 pin as follows:
00 – General Purpose Input (default)
01 – General Purpose Output
9:8
PCIE_GPIO18_CTL
rw
10 – HP_INTX, PCI Hot Plug Interrupt Output
11 – PD_CHG, Presence Detect Changed Output
See GPIO Data register for a detailed description of this field. This field is loaded from
EEPROM (if present), and reset with FRST.
GPIO 17 Control. This field controls the GPIO19 pin as follows:
00 – General Purpose Input (default)
01 – General Purpose Output
7:6
PCIE_GPIO17_CTL
rw
10 – General Purpose Input
11 – PWR_OVER, Power Limits exceeded
See GPIO Data register for a detailed description of this field. This field is loaded from
EEPROM (if present), and reset with FRST.
GPIO 16 Control. This field controls the GPIO16 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ATN_LED0
011 – Port 2 ATN_LED1
5:3
PCIE_GPIO16_CTL
rw
100 – Port 3 ATN_LED2
101 – Port 1 PWRFLT0
110 – Port 2 PWRFLT1
111 – Port 3 PWRFLT2
See GPIO Data register for a detailed description of this field. This field is loaded from
EEPROM (if present), and reset with FRST.
GPIO 15 Control. This field controls the GPIO15 pin as follows:
000 – General Purpose Input (default)
001 – General Purpose Output
010 – Port 1 ATN_LED0
011 – Port 2 ATN_LED1
2:0
PCIE_GPIO15_CTL
rw
100 – Port 3 PWR_LED2
101 – Port 1 PWRFLT0
110 – Port 2 PWRFLT1
111 – Port 3 PWRFLT2.
See GPIO Data register for a detailed description of this field. This field is loaded from
EEPROM (if present), and reset with FRST.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
71
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.65 GPIO Data Register
This register is used to read the state of the GPIO pins and to change the state of GPIO pins that are in
output mode. Reads to this register return the state of the GPIO pins, regardless of PCI Hot Plug
strapping or GPIO configuration. Writes to this register only affect pins that are configured as a general
purpose output.
PCI register offset:
C4h
Register type:
Read/Write; Read Only
Default value:
00000 0000h
BIT NUMBER
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
BIT NUMBER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Table 4-39. Bit Descriptions – GPIO Data Register
BIT
FIELD NAME
ACCESS
31:19
RSVD
r
DESCRIPTION
GPIO 18 data.
HP_INTX / PD_CHG / GPIO 18 data.
HP_INTX output mode:
Reads indicate current state of pin
Writes have no affect
PD_CHG output mode:
18
PCIE_GPIO18_DATA
rw
Reads indicate current state of pin
Writes have no affect
PD_CHG is asserted whenever all of the following are true for any given slot:
PDC[n] bit is asserted in the Slot Status register for switch downstream port n, and
PDC_EN[n] bit is asserted in Slot Control Register for switch downstream port n
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
This field is loaded from EEPROM (if present), and reset with FRST.
PWR_OVER / GPIO 17 data.
PWR_OVER mode: reads state of pin; writes have no affect
PWR_OVER pin is asserted whenever any of the following conditions are true:
PERST is asserted
17
PCIE_GPIO17_DATA
rw
Conditions are met for exceeding slot power limit (see PWR_OVRD field in
Global Chip Control Register)
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
This field is loaded from EEPROM (if present), and reset with FRST.
GP Input mode: reads state of pin; writes have no affect
16
PCIE_GPIO16_DATA
rw
GP Output mode: reads and also controls state of pin
This field is loaded from EEPROM (if present), and reset with FRST.
GPIO 15 data.
15
PCIE_GPIO15_DATA
rw
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
This field is loaded from EEPROM (if present), and reset with FRST.
72
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-39. Bit Descriptions – GPIO Data Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
GPIO 14 data.
14
PCIE_GPIO14_DATA
rw
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
This field is loaded from EEPROM (if present), and reset with FRST.
GPIO 13 data.
LED driver (see GPIO C Controls)
13
PCIE_GPIO13_DATA
rw
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
This bit field is loaded from EEPROM (if present), and reset with FRST.
GPIO 12 data.
LED driver (see GPIO C Controls)
12
PCIE_GPIO12_DATA
rw
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
This bit field is loaded from EEPROM (if present), and reset with FRST.
GPIO 11 data.
GP Input mode: reads state of pin; writes have no affect
11
PCIE_GPIO11_DATA
rw
GP Output mode: reads and also controls state of pin
Program-selectable HP input or output pin
This bit field is loaded from EEPROM (if present), and reset with FRST.
GPIO 10 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
10
PCIE_GPIO10_DATA
rw
Program-selectable HP input pin
This field is valid only if DN3_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 9 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
9
PCIE_GPIO9_DATA
rw
Program-selectable HP input pin
This field is valid only if DN3_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 8 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
8
PCIE_GPIO8_DATA
rw
Program-selectable HP output pin
This field is valid only if DN3_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 7 data.
GP Input mode: reads state of pin; writes have no affect
7
PCIE_GPIO7_DATA
rw
GP Output mode: reads and also controls state of pin
GP Output mode: reads and also controls state of pin
This bit field is loaded from EEPROM (if present), and reset with FRST.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
73
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-39. Bit Descriptions – GPIO Data Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
GPIO 6 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
6
PCIE_GPIO6_DATA
rw
Program-selectable HP input pin
This field is valid only if DN2_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 5 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
5
PCIE_GPIO5_DATA
rw
Program-selectable HP input pin
This field is valid only if DN2_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 4 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
4
PCIE_GPIO4_DATA
rw
Program-selectable HP output pin
This field is valid only if DN2_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 3 data.
GP Input mode: reads state of pin; writes have no affect
3
PCIE_GPIO3_DATA
rw
GP Output mode: reads and also controls state of pin
Program-selectable HP Input or Output pin
This bit field is loaded from EEPROM (if present), and reset with FRST.
GPIO 2 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
2
PCIE_GPIO2_DATA
rw
Program-selectable HP input pin
This field is valid only if DN1_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 1 data.
GP Input mode: reads state of pin; writes have no affect
GP Output mode: reads and also controls state of pin
1
PCIE_GPIO1_DATA
rw
Program-selectable HP input pin
This field is valid only if DN1_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
GPIO 0 data.
GP Input mode: reads state of pin; writes have no effect
GP Output mode: reads and also controls state of pin
0
PCIE_GPIO0_DATA
rw
Program-selectable HP output pin
This field is valid only if DN1_DPSTRP == 0. If this bit field is valid then it is loaded from
EEPROM (if present), and reset with FRST. If this field is invalid, it is a read-only bit
field.
74
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.2.66 TI Proprietary Register
This read/write TI proprietary register is located at offset C8h and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
If an EEPROM is used to load configuration registers, the value loaded for this register must be
00000001h.
PCI register offset:
C8h
Register type:
Read/Write
Default value:
xxxx 0001h
BIT NUMBER
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
BIT NUMBER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
4.2.67 TI Proprietary Register
This read/write TI proprietary register is located at offset CCh and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
If an EEPROM is used to load configuration registers, the value loaded for this register must be
00000000h.
PCI register offset:
CCh
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
BIT NUMBER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
4.2.68 TI Proprietary Register
This read/write TI proprietary register is located at offset D0h and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
If an EEPROM is used to load configuration registers, the value loaded for this register must be
32140000h.
PCI register offset:
D0h
Register type:
Read/Write
Default value:
3214 0000h
BIT NUMBER
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RESET STATE
0
0
1
1
0
0
1
0
0
0
0
1
0
1
0
0
BIT NUMBER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
75
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.69 TI Proprietary Register
This read/write TI proprietary register is located at offset D4h and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
If an EEPROM is used to load configuration registers, the value loaded for register D5h must be 10h.
PCI register offset:
D4h
Register type:
Read/Write
Default value:
0000 0010
BIT NUMBER
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
BIT NUMBER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
4.2.70 TI Proprietary Register
This read/write TI proprietary register is located at offset D8h and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
PCI register offset:
D8h
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
RESET STATE
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.71 TI Proprietary Register
This read/write TI proprietary register is located at offset DCh and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
76
PCI register offset:
DCh
Register type:
Read/Write
Default value:
0000 0002h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
1
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.2.72 Subsystem Access Register
This register is a read/write register. The contents of this register are aliased to the Subsystem Vendor ID
and Subsystem ID registers at PCI Offsets 84h and 86h for all PCI Express ports.
PCI register offset:
E0h
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-40. Bit Descriptions – Subsystem Access Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
31:16
SubsystemID
rw
Subsystem ID. The value written to this field is aliased to the Subsystem ID register at PCI
Offset 66h. This field is loaded from EEPROM (when present) and reset with PERST.
15:0
SubsystemVendorID
rw
Subsystem Vendor ID. The value written to this field is aliased to the Subsystem Vendor
ID register at PCI Offset 64h. This field is loaded from EEPROM (when present) and reset
with PERST.
4.2.73 General Control Register
This register is a read/write register that is used to control various functions of the XIO3130.
PCI register offset:
E4h
Register type:
Read/Write; Read Only
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-41. Bit Descriptions – General Control Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
31:3
RSVD
r
2
TI_PROPRIETARY
rw
TI proprietary. This bit must not be changed from the specified default value.
L1 disable. This bit may be used to disable software-directed L1 entry when in
lower D-states (D1-D3). The value of L1_DISABLE is 0 (the default). Link
power states are managed in accordance with the PCI Express base
specification. When L1_DISABLE is 1, the upstream port of the XIO3130 does
not enter L1 even when directed to do so through software.
1
L1_DISABLE
rw
0
RSVD
r
Reserved. When read, these bits return zeros.
Reserved. When read, this bit returns zero.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
77
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.74 Downstream Ports Link PM Latency Register
This read/write register is used to program L0s and L1 exit latencies for all XIO3130 downstream ports.
Similar information is provided in a separate register for the upstream port.
PCI register offset:
E8h
Register type:
Read/Write; Read Only
Default value:
3F24h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-42. Bit Descriptions – Downstream Ports Link PM Latency Register
BIT
FIELD NAME
ACCESS
15:14
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
Endpoint L0s acceptable latency. This field is used to program the maximum acceptable
latency when exiting the L0s state. This field is used to set the L0s Acceptable Latency field
in the Device Capabilities register.
000 – Less than 64 ns
001 – 64 ns up to less than 128 ns
010 – 128 ns up to less than 256 ns
13:11
EP_L0S_LAT
rw
011 – 256 ns up to less than 512 ns
100 – 512 ns up to less than 1 ms
101 – 1 ms up to less than 2 ms
110 – 2 ms to 4 ms
111 – More than 4 ms (default)
This field is loaded from EEPROM (when present) and reset with PERST.
Endpoint L1 acceptable latency. This field is used to program the maximum acceptable
latency when exiting the L1 state. This field is used to set the L1 Acceptable Latency field in
the Device Capabilities register.
000 – Less than 1 ms
001 – 1 ms up to less than 2 ms
010 – 2 ms up to less than 4 ms
10:8
EP_L1_LAT
rw
011 – 4 ms up to less than 8 ms
100 – 8 ms up to less than 16 ms
101 – 16 ms up to less than 32 ms
110 – 32 ms to 64 ms
111 – More than 64 ms (default)
This field is loaded from EEPROM (when present) and reset with PERST.
7:6
RSVD
r
Reserved. When read, these bits return zeros.
L0s exit latency. This field is used to program the maximum latency for the PHY to exit the
L0s state. This is used to set the L0s Exit Latency field in the Link Capabilities register.
000 – Less than 64 ns
001 – 64 ns up to less than 128 ns
010 – 128 ns up to less than 256 ns
5:3
L0S_EXIT_LAT
rw
011 – 256 ns up to less than 512 ns
100 – 512 ns up to less than 1 ms (default)
101 – 1 ms up to less than 2 ms
110 – 2 ms to 4 ms
111 – More than 4 ms
78
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-42. Bit Descriptions – Downstream Ports Link PM Latency Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
L1 exit latency. This field is used to program the maximum latency for the PHY to exit the
L1 state. This is used to set the L1 Exit Latency field in the Link Capabilities register.
000 – Less than 1 ms
001 – 1 ms up to less than 2 ms
010 – 2 ms up to less than 4 ms
2:0
L1_EXIT_LAT
rw
011 – 4 ms up to less than 8 ms
100 – 8 ms up to less than 16 ms (default)
101 – 16 ms up to less than 32 ms
110 – 32 ms to 64 ms
111 – More than 64 ms
4.2.75 Global Switch Control Register
This read/write register is used to control various functions across the entire XIO3130.
PCI register offset:
EAh
Register type:
Read/Write; Read Only; Clear by a Write of One; Sticky
Default value:
0004h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-43. Bit Descriptions – Global Switch Control Register
BIT
FIELD NAME
ACCESS
15:7
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
Downstream ports L0s independence
6
DP_L0S_IND
rw
5
RSVD
r
4
DEFER_L_EXIT
rw
3
RSVD
r
0 – Downstream ports (all) Tx L0s entry dependent on whether upstream Rx is in L0s according to
PCI Express Base Specification, section 5.4.1.1.1.
1 – Downstream ports Tx L0s entry not dependent on whether upstream Rx is in L0s.
Reserved. When read, this bit returns zero.
Defer L0s, L1 exit. This bit configures logic to not automatically power up all downstream ports when
the upstream port receives a downstream flowing packet.
This field is loaded from EEPROM (when present) and reset with PERST.
2
D1_SUPPORT
rw
Reserved. When read, this bit returns zero.
D1 support. This bit enables whether all PCI Express XIO3130 functions are capable of D1 support.
The field controls (1) the D1_SUPPORT bit in the Power Management Capabilities register for all
XIO3130 ports, and (2) bit 1 in the 5-bit PME_SUPPORT field in the Power Management Capabilities
register for all XIO3130 ports.
0 – D1 not supported
1 – D1 supported
This field is loaded from EEPROM (when present) and reset with PERST.
PCI Hot Plug PME message enable. This bit enables PME_Turn_Off/PME_TO_Ack messages when
power is shut off to a slot using the PC_CTL bit in the Slot Control register for downstream ports.
1
HP_PME_MSG
_EN
rw
0 – Disable PME_Turn_Off / PME_TO_Ack messages for slot power control
1 – Enable PME_Turn_Off / PME_TO_Ack messages for slot power control
This field is loaded from EEPROM (when present) and reset with PERST.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
79
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-43. Bit Descriptions – Global Switch Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
Beacon detect disable. This bit disables beacon detection on all downstream ports and allows the
reference macro to be placed in low power state during D3cold.
0
BCN_DET_DIS
0 – Beacon detection enabled
rwh
1 – Beacon detection disabled
This field is loaded from EEPROM (when present) and reset with GRST.
4.2.76 Advanced Error Reporting Capability ID Register
This read-only register identifies the linked list item as the register for PCI Express Advanced Error
Reporting Capabilities. The register returns 0001h when read.
PCI register offset:
100h
Register type:
Read only
Default value:
0001h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.2.77 Next Capability Offset/Capability Version Register
This read-only register returns the value 0000h to indicate that this extended capability block represents
the end of the linked list of extended capability structures. The least significant four bits identify the
revision of the current capability block as 1h.
PCI register offset:
102h
Register type:
Read only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.2.78 Uncorrectable Error Status Register
This register reports the status of individual errors as they occur. Software may clear these bits only by
writing a 1 to the desired location.
80
PCI register offset:
104h
Register type:
Read Only, Cleared by a Write of one
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-44. Uncorrectable Error Status Register
BIT
FIELD NAME
ACCESS
31:21
RSVD
r
DESCRIPTION
20
UR_ERROR
rcuh
Unsupported Request error. This bit is asserted when an Unsupported Request error is
detected (i.e., when a request is received that results in the sending of a completion with
an Unsupported Request status).
19
ECRC_ERROR
rcuh
Extended CRC error. This bit is asserted when an Extended CRC error is detected.
18
MAL_TLP
rcuh
Malformed TLP. This bit is asserted when a malformed TLP is detected.
17
RX_OVERFLOW
rcuh
Receiver overflow. This bit is asserted when the flow control logic detects that the
transmitting device has illegally exceeded the number of credits that were issued.
16
UNXP_CPL
rcuh
Unexpected completion. This bit is asserted when a completion packet is received that
does not correspond to an issued request.
15
CPL_ABORT
rcuh
Completer abort. This bit is asserted when the completion to a pending request arrives with
Completer Abort status.
14
CPL_TIMEOUT
rcuh
Completion timeout. This bit is asserted when no completion has been received for an
issued request before the timeout period.
13
FC_ERROR
rcuh
Flow control error. This bit is asserted when a flow control protocol error is detected either
during initialization or during normal operation.
12
PSN_TLP
rcuh
Poisoned TLP. This bit is asserted when an outgoing packet (request or completion) has
been poisoned by setting the poison bit and has inverted the extended CRC attached to
the end of the packet.
11:6
RSVD
r
5
SD_ERROR
rcuh
Surprise down error. See Surprise Down ECN for a description of this error condition.
4
DLL_ERROR
rcuh
Data link protocol error. This bit is asserted if a data link layer protocol error is detected.
3:1
RSVD
r
Reserved. Return zeros when read.
0
Undefined
r
The value read from this bit is undefined.
Reserved. Return zeros when read.
Reserved. Return zeros when read.
4.2.79 Uncorrectable Error Mask Register
The Uncorrectable Error Mask register controls the reporting of individual errors as they occur. When a bit
is set to one, the error status bits are still affected, but the error is not logged and no error reporting
message is sent upstream.
PCI register offset:
108h
Register type:
Read Only, Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-45. Uncorrectable Error Mask Register
BIT
FIELD NAME
ACCESS
31:21
RSVD
r
DESCRIPTION
Reserved. Return zeros when read.
Unsupported Request error mask.
20
UR_ERROR_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Extended CRC error mask.
19
ECRC_ERROR_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
81
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-45. Uncorrectable Error Mask Register (continued)
BIT
FIELD NAME
ACCESS
18
MAL_TLP_MASK
rwh
DESCRIPTION
Malformed TLP mask.
0 - Error condition is unmasked.
1 - Error condition is masked.
Receiver Overflow mask.
17
RX_OVERFLOW_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Unexpected Completion mask.
16
UNXP_CPL_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Completer Abort mask.
15
CPL_ABORT_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Completion Timeout mask.
14
CPL_TIMEOUT_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Flow Control error mask.
13
FC_ERROR_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Poisoned TLP mask.
12
PSN_TLP_MASK
rwh
11:6
RSVD
r
0 - Error condition is unmasked.
1 - Error condition is masked.
Reserved. Return zeros when read.
Surprise Down error mask.
5
SD_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Data Link Protocol error mask.
4
DLL_ERROR_MASK
rwh
0 - Error condition is unmasked.
3:1
RSVD
r
Reserved. Return zeros when read.
0
Undefined
r
The value read from this bit is undefined.
1 - Error condition is masked.
4.2.80 Uncorrectable Error Severity Register
The Uncorrectable Error Severity register controls the reporting of individual errors as ERR_FATAL or
ERR_NONFATAL. When a bit is set, the corresponding error condition is identified as fatal. When a bit is
clear, the corresponding error condition is identified as nonfatal.
82
PCI register offset:
10Ch
Register type:
Read Only, Read/Write
Default value:
0003 2030h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
1
17
1
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
1
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
1
4
1
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-46. Uncorrectable Error Severity Register
BIT
FIELD NAME
ACCESS
31:21
RSVD
r
DESCRIPTION
Reserved. Return zeros when read.
Unsupported Request error severity.
20
UR_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Extended CRC error severity.
19
ECRC_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Malformed TLP severity.
18
MAL_TLP_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Receiver Overflow severity.
17
RX_OVERFLOW_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Unexpected Completion severity.
16
UNXP_CPL_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Completer Abort severity.
15
CPL_ABORT_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Completion Timeout severity.
14
CPL_TIMEOUT_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Flow Control error severity.
13
FC_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Poisoned TLP severity.
12
PSN_TLP_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
11:6
RSVD
r
5
SD_ERROR_SEVR
rwh
Reserved. Return zeros when read.
Surprise Down error severity.
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Data Link Protocol error severity.
4
DLL_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
3:1
RSVD
r
Reserved. Return zeros when read.
0
Undefined
r
The value read from this bit is undefined.
4.2.81 Correctable Error Status Register
The Correctable Error Status register reports the status of individual errors as they occur. Software may
clear these bits only by writing a 1 to the desired location.
PCI register offset:
110h
Register type:
Read Only, Cleared by a Write of one
Default value:
0000 0000h
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
83
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-47. Correctable Error Status Register
BIT
FIELD NAME
ACCESS
31:14
RSVD
r
DESCRIPTION
13
ANFES
rcuh
Advisory nonfatal error status.
12
REPLAY_TMOUT
rcuh
Replay timer timeout. This bit is asserted when the replay timer expires for a pending
request or completion that has not been acknowledged.
11:9
RSVD
r
8
REPLAY_ROLL
rcuh
REPLAY_NUM rollover. This bit is asserted when the replay counter rolls over when a
pending request of completion has not been acknowledged.
7
BAD_DLLP
rcuh
Bad DLLP error. This bit is asserted when an 8b/10n error is detected by the PHY during
reception of a DLLP.
6
BAD_TLP
rcuh
Bad TLP error. This bit is asserted when an 8b/10b error is detected by the PHY during
reception of a TLP.
5:1
RSVD
r
0
RX_ERROR
rcuh
Reserved. Return zeroes when read.
Reserved. Return zeroes when read.
Reserved. Return zeros when read.
Receiver error. This bit is asserted when an 8b/10b error is detected by the PHY at any
time.
4.2.82 Correctable Error Mask Register
The Correctable Error Mask register controls the reporting of individual errors as they occur. When a bit is
set to one, error status bits are still affected, but the error is not logged and no error reporting message is
sent upstream.
PCI register offset:
114h
Register type:
Read Only, Read/Write
Default value:
0000 2000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
1
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-48. Correctable Error Mask Register
BIT
FIELD NAME
ACCESS
31:14
RSVD
r
DESCRIPTION
Reserved. Return zeros when read.
Advisory nonfatal error mask. This bit is set by default to enable compatibility with
software that does not comprehend role-based error reporting.
13
ANFEM
rwh
0 – Error condition is unmasked
1 – Error condition is masked
Replay timer timeout mask.
12
REPLAY_TMOUT_MASK
rwh
11:9
RSVD
r
0 – Error condition is unmasked
1 – Error condition is masked
84
Reserved. Return zeros when read.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-48. Correctable Error Mask Register (continued)
BIT
FIELD NAME
ACCESS
8
REPLAY_ROLL_MASK
rwh
DESCRIPTION
REPLAY_NUM rollover mask.
0 – Error condition is unmasked
1 – Error condition is masked
Bad DLLP error mask.
7
BAD_DLLP_MASK
rwh
0 – Error condition is unmasked
1 – Error condition is masked
Bad TLP error mask.
6
BAD_TLP_MASK
rwh
5:1
RSVD
r
0
RX_ERROR_MASK
rwh
0 – Error condition is unmasked
1 – Error condition is masked
Reserved. Return zeros when read.
Receiver error mask.
0 – Error condition is unmasked
1 – Error condition is masked
4.2.83 Advanced Error Capabilities and Control Register
The Advanced Error Capabilities and Control register allows the system to monitor and control the
advanced error reporting capabilities.
PCI register offset:
118h
Register type:
Read Only, Read/Write
Default value:
0000 00A0h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
1
6
0
5
1
4
0
3
0
2
0
1
0
0
0
Table 4-49. Advanced Error Capabilities and Control Register
BIT
FIELD NAME
ACCESS
31:9
RSVD
r
8
ECRC_CHK_EN
rwh
DESCRIPTION
Reserved. Return zeros when read.
Extended CRC check enable.
0 – Extended CRC checking is disabled
1 – Extended CRC checking is enabled
7
ECRC_CHK_CAPABLE
r
6
ECRC_GEN_EN
rwh
Extended CRC check capable. This read-only bit returns a value of ‘1’ indicating that
the bridge is capable of checking extended CRC information.
Extended CRC generation enable.
0 – Extended CRC generation is disabled
1 – Extended CRC generation is enabled
5
ECRC_GEN_CAPABLE
r
Extended CRC generation capable. This read-only bit returns a value of ‘1’
indicating that the bridge is capable of generating extended CRC information.
4:0
FIRST_ERR
rh
First error pointer. This five-bit value reflects the bit position within the Uncorrectable
Error Status register corresponding to the class of the first error condition that was
detected.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
85
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.2.84 Header Log Register
The Header Log register stores the TLP header for the packet that lead to the most recently detected error
condition. Offset 11Ch contains the first DWORD. Offset 128h contains the last DWORD (in the case of a
4DW TLP header).
86
PCI register offset:
11Ch – 128h
Register type:
Read only
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
4.3
SLLS693F – MAY 2007 – REVISED JANUARY 2010
PCI Express Downstream Port Registers
The default reset domain for all downstream port registers is SBRST. Some register fields are placed in a
different reset domain from the default reset domain; all bit and field descriptions identify any unique reset
domains. Generally, all sticky bits are placed in the GRST domain and all (non-sticky) EEPROM loadable
bits are placed in the PERST domain.
4.3.1
PCI Configuration Space (Downstream Port) Register Map
Table 4-50. PCI Express Downstream Port Configuration Register Map (Type 1)
Register Name
Offset
Device ID
Vendor ID
Status
Command
000h
004h
Class Code
BIST
Revision ID
Header Type
Latency Timer
Cache Line Size
Reserved
Secondary Latency Timer
Subordinate Bus Number
008h
00Ch
010h-014h
Secondary Bus Number
Primary Bus Number
018h
I/O Limit
I/O Base
01Ch
Secondary Status
Memory Limit
Memory Base
020h
Pre-fetchable Memory Limit
Pre-fetchable Memory Base
024h
Pre-fetchable Base Upper 32 Bits
028h
Pre-fetchable Limit Upper 32 Bits
02Ch
I/O Limit Upper 16 Bits
I/O Base Upper 16 Bits
Reserved
034h
Interrupt Line
03Ch
Reserved
Bridge Control
038h
Interrupt Pin
Reserved
Power Management Capabilities
PM Data (RSVD)
040h-04Ch
Next-item Pointer
PMCSR_BSE
PM CAP ID
Power Management CSR
Reserved
MSI Message Control
Next-item Pointer
MSI CAP ID
054h
Reserved
078h
MSI Message Data
Next-item Pointer
Subsystem ID
070h
074h
MSI Upper Message Address
SSID/SSVID CAP ID
Subsystem Vendor ID
Reserved
PCI Express Capabilities Register
050h
058h-06Ch
MSI Message Address
Reserved
030h
Capabilities Pointer
07Ch
080h
084h
088h-08Ch
Next-item Pointer
PCI Express Capability ID
Device Capabilities
Device Status
090h
094h
Device Control
Link Capabilities
098h
09Ch
Link Status
Link Control
Slot Capabilities
0A0h
A4h
Slot Status
Slot Control
A8h
Reserved
0ACh-0C4h
TI Proprietary
0C8h-0D0h
General Control
0D4h
Reserved
General Slot Info
0D8h-0E8h
Reserved
Reserved
LOs Idle Timeout
0ECh
0F0h-0FCh
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
87
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-51. Extended Configuration Space (Downstream Port)
Register Name
Next Capability Offset / Capability Version
4.3.2
Offset
PCI Express Advanced Error Reporting Capabilities ID
100h
Uncorrectable Error Status Register
104h
Uncorrectable Error Mask Register
108h
Uncorrectable Error Severity Register
10Ch
Correctable Error Status Register
110h
Correctable Error Mask
114h
Advanced Error Capabilities and Control
118h
Header Log Register
11Ch
Header Log Register
120h
Header Log Register
124h
Header Log Register
128h
Reserved
12Ch-FFCh
Vendor ID Register
This 16-bit read-only register contains the value 104Ch, which is the vendor ID assigned to Texas
Instruments.
PCI register offset:
00h
Register type:
Read only
Default value:
104Ch
BIT NUMBER
RESET STATE
4.3.3
15
0
14
0
13
0
12
1
11
0
10
0
9
0
8
0
7
0
6
1
5
0
4
0
3
1
2
1
1
0
0
0
Device ID Register
This 16-bit read-only register contains the device ID assigned by TI to the XIO3130. The value in this
register is the same for all downstream ports, as defined in the following table.
PCI register offset:
02h
Register type:
Read only
Default value:
8233h
BIT NUMBER
RESET STATE
4.3.4
15
1
14
0
13
0
12
0
11
0
10
0
9
1
8
0
7
0
6
0
5
1
4
1
3
0
2
0
1
1
0
1
Command Register
The Command register controls the way the downstream port bridge behaves on its primary interface; i.e.,
the internal PCI bus between the upstream and downstream ports.
PCI register offset:
04h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
88
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
XIO3130 Configuration Register Space
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-52. Bit Descriptions – Command Register
BIT
FIELD NAME
ACCESS
15:11
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
INTx disable. This bit is used to enable device-specific INTx interrupts. The XIO3130
downstream ports can generate INTx interrupts due to PCI Hot Plug events. The XIO3130
forwards INTx messages from downstream ports to the upstream port (see INTx Support
section) regardless of this bit.
10
INT_DISABLE
rw
9
FBB_ENB
r
8
SERR_ENB
rw
SERR enable. The relevant error checking is unnecessary for the XIO3130 internal PCI bus.
When set, this bit enables the transmission by the primary interface of ERR_NONFATAL and
ERR_FATAL messages forwarded from the secondary interface. This bit does not affect
transmission of ERR_COR messages.
7
STEP_ENB
r
Address/data stepping control. This bit does not apply to PCI-Express and is hardwired to 0.
6
PERR_ENB
rw
Parity error response enable. This bit has no impact on hardware behavior. It is assumed that
the relevant error checking is unnecessary for the XIO3130 internal PCI bus.
5
VGA_ENB
r
VGA palette snoop enable. The XIO3130 does not support VGA palette snooping, so this bit
returns zero when read.
4
MWI_ENB
r
Memory write and invalidate enable. This bit does not apply to PCI-Express, so it is hardwired to
zero.
3
SPECIAL
r
Special cycle enable. This bit does not apply to PCI-Express and is hardwired to zero.
Fast back-to-back enable. This bit does not apply to PCI-Express, so it returns zero when read.
Bus master enable. When set, the XIO3130 is enabled to initiate cycles on the downstream PCI
Express interface.
2
MASTER_ENB
0 – Downstream PCI Express interface cannot initiate transactions. The XIO3130 must
disable response to memory and I/O transactions on the downstream interface.
rw
1 – Downstream PCI Express interface can initiate transactions. The bridge can forward
memory and I/O transactions.
1
MEMORY_ENB
rw
Memory response enable. Setting this bit enables the downstream port to respond to memory
transactions.
0
IO_ENB
rw
I/O space enable. Setting this bit enables the downstream port to respond to I/O transactions.
4.3.5
Status Register
The Status register provides information about the downstream port’s primary interface, i.e., the internal
PCI bus between the upstream and downstream ports.
PCI register offset:
06h
Register type:
Read Only; Clear by a Write of One; Hardware Update
Default value:
0010h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-53. Bit Descriptions – Status Register
BIT
15
FIELD NAME
PAR_ERR
ACCESS
rcu
DESCRIPTION
Detected parity error. This bit is set when the virtual internal PCI interface receives a
poisoned TLP. This bit is set regardless of the state of the Parity Error Response bit in the
Command register.
0 – No parity error detected.
1 – Parity error detected.
14
SYS_ERR
rcu
Signaled system error. This bit is set when the XIO3130 sends an ERR_FATAL or
ERR_NONFATAL message upstream and the SERR Enable bit in the Command register is
set.
0 – No error signaled.
1 – ERR_FATAL or ERR_NONFATAL signaled.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
89
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-53. Bit Descriptions – Status Register (continued)
BIT
FIELD NAME
ACCESS
13
MABORT
r
Received master abort. This bit is hardwired to zero. It is assumed that the relevant error
checking is unnecessary for the XIO3130 internal PCI bus.
12
TABORT_REC
r
Received target abort. This bit is hardwired to zero. It is assumed that the relevant error
checking is unnecessary for the XIO3130 internal PCI bus.
11
TABORT_SIG
r
Signaled target abort. This bit is hardwired to zero. It is assumed that the relevant error
checking is unnecessary for the XIO3130 internal PCI bus.
10:9
PCI_SPEED
r
DEVSEL timing. These bits are read only zero because they do not apply to PCI Express.
8
DATAPAR
rcu
Master data parity error. This bit is set when the downstream port receives a poisoned
completion or poisons a write request on the internal virtual PCI bus. This bit is never set if
the parity error response enable bit in the Command register is clear.
7
FBB_CAP
r
Fast back-to-back capable. This bit does not have a meaningful context for a PCI Express
device and is hardwired to zero.
6
RSVD
r
Reserved. When read, this bit returns zero.
5
66MHZ
r
66-MHz capable. This bit does not have a meaningful context for a PCI Express device and is
hardwired to zero.
4
CAPLIST
r
Capabilities list. This bit returns 1 when read, indicating that the XIO3130 supports additional
PCI capabilities.
3
INT_STATUS
r
Interrupt status. This bit reflects the INTx interrupt status of the function. The XIO3130
forwards INTx messages from downstream ports to the upstream port.
2:0
RSVD
r
Reserved. When read, these bits return zeros.
4.3.6
DESCRIPTION
Class Code and Revision ID Register
This read-only register categorizes the Base Class, Sub Class, and Programming Interface of the
XIO3130. The Base Class is 06h, which identifies the device as a bridge device. The Sub Class is 04h,
which identifies the function as a PCI-to-PCI bridge. The Programming Interface is 00h. In addition, the TI
chip revision is indicated in the lower byte (01h).
PCI register offset:
08h
Register type:
Read only
Default value:
0604 0001h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
1
25
1
24
0
23
0
22
0
21
0
20
0
19
0
18
1
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-54. Bit Descriptions – Class Code and Revision ID Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
31:24
BASECLASS
r
Base class. This field returns 06h when read, which classifies the function as a bridge
device.
23:16
SUBCLASS
r
Subclass. This field returns 04h when read, which specifically classifies the function as a
PCI-to-PCI bridge.
15:8
PGMIF
r
Programming interface. This field returns 00h when read.
7:0
CHIPREV
r
Silicon revision. This field returns the silicon revision.
90
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
4.3.7
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Cache Line Size Register
The Cache Line Size register is implemented by PCI Express devices as a read-write field for legacy
compatibility, but has no impact on any PCI Express device functionality.
PCI register offset:
0Ch
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
4.3.8
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Primary Latency Timer Register
This read-only register has no meaningful context for a PCI Express device, so it returns zeros when read.
PCI register offset:
0Dh
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
4.3.9
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Header Type Register
This read-only register indicates that this function has a Type 1 PCI header. Bit seven of this register is
zero, indicating that the XIO3130 downstream port PCI-to-PCI bridge is not a multifunction device.
PCI register offset:
0Eh
Register type:
Read only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.3.10 BIST Register
Since the XIO3130 does not support a built-in self test (BIST), this read-only register returns the value 00h
when read.
PCI register offset:
0Fh
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
91
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.3.11 Primary Bus Number
This register specifies the bus number of the PCI bus segment for the downstream port primary interface
(i.e., the internal PCI bus).
PCI register offset:
18h
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.12 Secondary Bus Number
This register specifies the bus number of the PCI bus segment for the downstream port secondary
interface (i.e., the PCI Express interface). The XIO3130 uses this register to determine how to respond to
a Type 1 configuration transaction.
PCI register offset:
19h
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.13 Subordinate Bus Number
This register specifies the bus number of the highest number PCI bus segment that is downstream of the
XIO3130 downstream port. The XIO3130 uses this register to determine how to respond to a Type 1
configuration transaction.
PCI register offset:
1Ah
Register type:
Read/Write
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.14 Secondary Latency Timer Register
This register does not apply to PCI-Express, so it is hardwired to zero.
PCI register offset:
1Bh
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
92
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.3.15 I/O Base Register
This read/write register specifies the lower limit of the I/O addresses that the XIO3130 downstream port
forwards downstream.
PCI register offset:
1Ch
Register type:
Read/Write; Read Only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-55. Bit Descriptions – I/O Base Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
I/O base. This field defines the bottom address of the I/O address range that is used to
determine when to forward I/O transactions from one interface to the other. These bits
correspond to address bits [15:12] in the I/O address. The lower 12 bits are assumed to be 0.
The 16 bits that correspond to address bits [31:16] of the I/O address are defined in the I/O
Base Upper 16 Bits register.
7:4
IOBASE
rw
3:0
IOTYPE
r
I/O type. This field is read-only 01h, which indicates 32 bit I/O addressing support.
4.3.16 I/O Limit Register
This read/write register specifies the upper limit of the I/O addresses that the XIO3130 downstream port
forwards downstream.
PCI register offset:
1Dh
Register type:
Read/Write; Read Only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-56. Bit Descriptions – I/O Limit Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
I/O limit. This field defines the top address of the I/O address range that is used to determine
when to forward I/O transactions from one interface to the other. These bits correspond to
address bits [15:12] in the I/O address. The lower 12 bits are assumed to be FFFh. The 16
bits that correspond to address bits [31:16] of the I/O address are defined in the I/O Limit
Upper 16 Bits register.
7:4
IOLIMIT
rw
3:0
IOTYPE
r
I/O type. This field is read-only 01h, which indicates 32-bit I/O addressing support.
4.3.17 Secondary Status Register
The Secondary Status register provides information about the downstream port PCI Express interface.
PCI register offset:
1Eh
Register type:
Read Only; Clear by a Write of One; Hardware Update
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
0
0
93
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-57. Bit Descriptions – Secondary Status Register
BIT
15
FIELD NAME
ACCESS
PAR_ERR
DESCRIPTION
Detected parity error. This bit is set when the PCI Express interface receives a poisoned TLP
on the downstream port. This bit is set regardless of the state of the Parity Error Response bit
in the Bridge Control register.
rcu
0 – No parity error detected.
1 – Parity error detected.
Received System Error. This bit is set when the XIO3130 sends an ERR_FATAL or
ERR_NONFATAL message upstream and the SERR Enable bit in the Command register is set.
14
SYS_ERR
rcu
0 – No error signaled.
1 – ERR_FATAL or ERR_NONFATAL signaled.
Received master abort. This bit is set when the downstream PCI Express interface of the
XIO3130 receives a completion with Unsupported Request Status.
13
MABORT
rcu
0 – Unsupported Request not received.
1 – Unsupported Request received on.
Received target abort. This bit is set when the downstream PCI Express interface of the
XIO3130 receives a completion with Completer Abort Status.
12
TABORT_REC
rcu
0 – Completer Abort not received.
1 - Completer Abort received.
Signaled target abort. This bit is set when the downstream PCI Express interface completes a
Request with Completer Abort Status.
11
TABORT_SIG
rcu
10:9
PCI_SPEED
r
8
DATAPAR
rcu
7
FBB_CAP
r
Fast back-to-back capable. This bit is hardwired to zero. This bit does not apply to PCI Express.
6
RSVD
r
Reserved. When read, this bit returns zero.
5
66MHZ
r
66-MHz capable. This bit is hardwired to zero. This bit does not apply to PCI Express.
4:0
RSVD
r
Reserved. When read, these bits return zeros.
0 – Completer Abort not signaled.
1 – Completer Abort signaled.
DEVSEL timing. These bits are hardwired to 00. These bits do not apply to PCI Express.
Master data parity error. This bit is set when the XIO3130 receives a poisoned completion or
poisons a write request on the downstream PCI Express interface. This bit is never set if the
parity error response enable bit in the Bridge Control register is clear.
4.3.18 Memory Base Register
This read/write register specifies the lower limit of the memory addresses that the downstream port
forwards downstream.
PCI register offset:
20h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-58. IBit Descriptions – Memory Base Register
BIT
94
FIELD NAME
ACCESS
DESCRIPTION
Memory base. This field defines the bottom address of the memory address range that is
used to determine when to forward memory transactions from one interface to the other.
These bits correspond to address bits [31:20] in the memory address. The lower 20 bits are
assumed to be zero.
15:4
MEMBASE
rw
3:0
RSVD
r
Reserved. When read, these bits return zeros.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.3.19 Memory Limit Register
This read/write register specifies the upper limit of the memory addresses that the downstream port
forwards downstream.
PCI register offset:
22h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-59. Bit Descriptions – Memory Limit Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
Memory limit. This field defines the top address of the memory address range that is used to
determine when to forward memory transactions from one interface to the other. These bits
correspond to address bits [31:20] in the memory address. The lower 20 bits are assumed to
be FFFFFh.
15:4
MEMLIMIT
rw
3:0
RSVD
r
Reserved. When read, these bits return zeros.
4.3.20 Pre-fetchable Memory Base Register
This read/write register specifies the lower limit of the pre-fetchable memory addresses that the
downstream port forwards downstream.
PCI register offset:
24h
Register type:
Read/Write; Read Only
Default value:
0001h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
Table 4-60. Descriptions – Pre-fetchable Memory Base Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:4
PREBASE
rw
Pre-fetchable memory base. This field defines the bottom address of the pre-fetchable
memory address range that is used to determine when to forward memory transactions from
one interface to the other. These bits correspond to address bits [31:20] in the memory
address. The lower 20 bits are assumed to be zero. The Pre-fetchable Base Upper 32 Bits
register is used to specify the bit [63:32] of the 64-bit pre-fetchable memory address.
3:0
64BIT
r
64-bit memory indicator. These read-only bits indicate that 64-bit addressing is supported for
this memory window.
4.3.21 Pre-fetchable Memory Limit Register
This read/write register specifies the upper limit of the pre-fetchable memory addresses that the
downstream port forwards downstream.
PCI register offset:
26h
Register type:
Read/Write; Read Only
Default value:
0001h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
0
1
95
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-61. Bit Descriptions – Pre-fetchable Memory Limit Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:4
PRELIMIT
rw
Pre-fetchable memory limit. This field defines the top address of the pre-fetchable memory
address range that is used to determine when to forward memory transactions from one
interface to the other. These bits correspond to address bits [31:20] in the memory address.
The lower 20 bits are assumed to be FFFFFh. The Pre-fetchable Limit Upper 32 Bits register
is used to specify the bit [63:32] of the 64-bit pre-fetchable memory address.
3:0
64BIT
r
64-bit memory indicator. These read-only bits indicate that 64-bit addressing is supported for
this memory window.
4.3.22 Pre-fetchable Base Upper 32 Bits Register
This read/write register specifies the upper 32 bits of the Pre-fetchable Memory Base register.
PCI register offset:
28h
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-62. Bit Descriptions – Pre-fetchable Base Upper 32 Bits Register
BIT
31:0
FIELD NAME
ACCESS
DESCRIPTION
rw
Pre-fetchable memory base upper 32 bits. This field defines the upper 32 bits of the bottom
address of the pre-fetchable memory address range that is used to determine when to forward
memory transactions downstream.
PREBASE
4.3.23 Pre-fetchable Limit Upper 32 Bits Register
This read/write register specifies the upper 32 bits of the Pre-fetchable Memory Limit register.
PCI register offset:
2Ch
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-63. Descriptions – Pre-fetchable Limit Upper 32 Bits Register
BIT
31:0
96
FIELD NAME
PRELIMIT
ACCESS
DESCRIPTION
rw
Pre-fetchable memory limit upper 32 bits. This field defines the upper 32 bits of the top address
of the pre-fetchable memory address range that is used to determine when to forward memory
transactions downstream.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.3.24 I/O Base Upper 16 Bits Register
This read/write register specifies the upper 16 bits of the I/O Base register.
PCI register offset:
30h
Register type:
Read/Write
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-64. Bit Descriptions – I/O Base Upper 16 Bits Register
BIT
15:0
FIELD NAME
ACCESS
IOBASE
DESCRIPTION
I/O base upper 16 bits. This field defines the upper 16 bits of the bottom address of the I/O
address range that is used to determine when to forward I/O transactions downstream.
rw
4.3.25 I/O Limit Upper 16 Bits Register
This read/write register specifies the upper 16 bits of the I/O Limit register.
PCI register offset:
32h
Register type:
Read/Write
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-65. Bit Descriptions – I/O Limit Upper 16 Bits Register
BIT
FIELD NAME
ACCESS
15:0
IOLIMIT
rw
DESCRIPTION
I/O limit upper 16 bits. This field defines the upper 16 bits of the top address of the I/O
address range that is used to determine when to forward I/O transactions downstream.
4.3.26 Capabilities Pointer Register
This read-only register provides a pointer into the PCI configuration header, which is where the PCI power
management block resides. Since the PCI power management registers begin at 50h, this register is
hardwired to 50h.
PCI register offset:
34h
Register type:
Read only
Default value:
50h
BIT NUMBER
RESET STATE
7
0
6
1
5
0
4
1
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
97
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.3.27 Interrupt Line Register
This read/write register, which the system programs, indicates to the software which interrupt line that the
XIO3130 downstream port has assigned to it. The default value of this register is FFh, which indicates that
an interrupt line has not yet been assigned to the function. This register is essentially a scratch-pad
register; it has no effect on the XIO3130 itself.
PCI register offset:
3Ch
Register type:
Read/Write
Default value:
FFh
BIT NUMBER
RESET STATE
7
1
6
1
5
1
4
1
3
1
2
1
1
1
0
1
4.3.28 Interrupt Pin Register
The Interrupt Pin register is read-only, which indicates that the XIO3130 downstream ports generate INTx
interrupts as follows:
• Downstream port 0 on PCI Interrupt pin INTA (register value of 01h)
• Downstream port 1 on PCI Interrupt pin INTA (register value of 01h)
• Downstream port 2 on PCI Interrupt pin INTA (register value of 01h)
Interrupts originated by XIO3130 downstream ports are associated with the primary side of the
downstream port PCI-to-PCI bridge, and as a result are only passed through the upstream port PCI-to-PCI
bridge as described in PCI Express Base Specification Revision 1.1, Page 69, Table 2-13.
PCI register offset:
3Dh
Register type:
Read only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.3.29 Bridge Control Register
The Bridge Control register provides extensions to the Command register that are specific to a bridge.
PCI register offset:
3Eh
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-66. Bit Descriptions – Bridge Control Register
BIT
FIELD NAME
ACCESS
15:12
RSVD
r
Reserved. When read, these bits return zeros.
11
DTSERR
r
Discard timer SERR enable. This bit is hardwired to zero. This bit does not apply to PCI Express.
10
DTSTATUS
r
Discard timer status. This bit is hardwired to zero. This bit does not apply to PCI Express.
9
SEC_DT
r
Secondary discard timer. This bit is hardwired to zero. This bit does not apply to PCI Express.
8
PRI_DEC
r
Primary discard timer. This bit is hardwired to zero. This bit does not apply to PCI Express.
7
FBB_EN
r
Fast back-to-back enable. This bit is hardwired to zero. This bit does not apply to PCI Express.
98
DESCRIPTION
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-66. Bit Descriptions – Bridge Control Register (continued)
BIT
6
FIELD NAME
SRST
ACCESS
rw
DESCRIPTION
Secondary bus reset. This bit is set when the software resets all devices downstream of the
XIO3130 downstream port. Setting this bit causes the downstream port to send a reset downstream
via a training sequence.
0 – Downstream port not in Reset state
1 – Downstream port in Reset state
5
MAM
r
Master abort mode. This bit is hardwired to zero. This bit does not apply to PCI Express.
VGA 16-bit decode. This bit enables the XIO3130 downstream port to provide full 16-bit decoding
for VGA I/O addresses. This bit only has meaning if the VGA enable bit is set.
4
VGA16
rw
0 – Ignore address bits [15:10] when decoding VGA I/O addresses.
1 – Decode address bits [15:10] when decoding VGA I/O addresses.
VGA enable. This bit modifies the response by the XIO3130 downstream port to VGA-compatible
addresses. If this bit is set, the XIO3130 downstream port positively decodes and forwards the
following accesses on the primary interface to the secondary interface (and, conversely, blocks the
forwarding of these addresses from the secondary to primary interface):
•＝ Memory accesses in the range 000A 0000h to 000BFFFFh
•＝ I/O addresses in the first 64KB of the I/O address space (address bits [31:16] are 0000h.) and
where address bits [9:0] are in the range 3B0h to 3BBh or 3C0h to 3DFh (inclusive of ISA
address aliases; address bits [15:10] may possess any value and are not used in the
decoding).
3
VGA
rw
If the VGA Enable bit is set, forwarding of VGA addresses is independent of the value of the ISA
Enable bit (located in the Bridge Control register), the I/O address range and memory address
ranges defined by the I/O Base and Limit registers, the Memory Base and Limit registers, and the
Pre-fetchable Memory Base and Limit registers of the bridge. Forwarding of VGA addresses is
qualified by the I/O Enable and Memory Enable bits in the Command register.
0 – Do not forward VGA-compatible memory and I/O addresses from the primary to secondary
interface unless they are enabled for forwarding by the defined I/O and memory address
ranges.
1 – Forward VGA-compatible memory and I/O addresses from the primary interface to the
secondary interface (if the I/O Enable and Memory Enable bits are set) independent of the I/O
and memory address ranges and independent of the ISA Enable bit.
2
ISA
rw
ISA enable. This bit modifies the response by the XIO3130 downstream port to ISA I/O addresses.
This bit applies only to I/O addresses that are enabled by the I/O Base and I/O Limit registers and
are in the first 64 KB of PCI I/O address space (0000 0000h to 0000 FFFFh). If this bit is set, the
bridge blocks any forwarding from primary to secondary of I/O transactions addressing the last 768
bytes in each 1 KB block. In the opposite direction (secondary to primary), I/O transactions are
forwarded if they address the last 768 bytes in each 1K block.
0 – Forward downstream all I/O addresses in the address range defined by the I/O Base and I/O
Limit registers.
1 – Forward upstream ISA I/O addresses in the address range defined by the I/O Base and I/O
Limit registers that are in the first 64 KB of PCI I/O address space (top 768 bytes of each 1 KB
block).
SERR enable. This bit controls the forwarding of system error events upstream from the secondary
interface to the primary interface. The XIO3130’s downstream port forwards system error events
upstream when:
•＝ This bit is set.
1
SERR_EN
rw
•＝ The SERR enable bit in the downstream port command register is set.
•＝ A nonfatal or fatal error condition is detected on the secondary interface (i.e., the PCI Express
interface).
0 – Disable the reporting of nonfatal errors and fatal errors.
1 – Enable the reporting of nonfatal errors and fatal errors.
Parity error response enable. For PCI Express, this bit controls responses to poisoned TLPs
received on the downstream port.
0
PERR_EN
rw
0 – Disable responses to poisoned TLPs.
1 – Enable responses to poisoned TLPs.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
99
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.3.30 Capability ID Register
This read-only register identifies the linked list item as the register for PCI power management. It returns
01h when read.
PCI register offset:
50h
Register type:
Read only
Default value:
01h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.3.31 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130 downstream port. This register reads 70h, which points to the MSI Capabilities registers.
PCI register offset:
51h
Register type:
Read only
Default value:
70h
BIT NUMBER
RESET STATE
7
0
6
1
5
1
4
1
3
0
2
0
1
0
0
0
4.3.32 Power Management Capabilities Register
This register indicates the capabilities of the XIO3130 downstream port related to PCI power
management.
PCI register offset:
52h
Register type:
Read only
Default value:
XXX3h
BIT NUMBER
RESET STATE
15
y
14
1
13
1
12
x
11
1
10
1
9
x
8
0
7
0
6
y
5
0
4
0
3
0
2
0
1
1
0
1
Table 4-67. Bit Descriptions – Power Management Capabilities Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:11
PME_SUPPORT
r
PME support. This 5-bit field indicates the power states from which the downstream port
may assert PME. These five bits return a value of 5’by11x1, which indicates that the
XIO3130 can assert PME from D0, D2, D3hot, maybe D3cold (i.e., depending on y), and
maybe D1 (i.e., depending on x). The bit that defines this power state for D3cold (i.e., y) is
controlled by the AUX_PRESENT bit in the Global Chip Control register. The bit defining
this power state for D1 (i.e., x) is controlled by the D1_SUPPORT bit in the Global Switch
Control register.
10
D2_SUPPORT
r
This bit returns a 1 when read, which indicates that the function supports the D2 device
power state.
9
D1_SUPPORT
r
This bit indicates whether the function supports the D1 device power state. This bit is
controlled by the D1_SUPPORT bit in the Global Switch Control register. The default
value x is controlled by the default value for the D1_SUPPORT bit in the Global Switch
Control register.
8:6
AUX_CURRENT
r
3.3-VAUX auxiliary current requirements. This field reads 3’b00y, i.e., either 3’b001 or
3’b000, depending on the AUX_PRESENT bit in the Global Chip Control register. 3’b001
indicates 55 mA maximum current in D3cold when PME is enabled, according to PCI
Power Management Specification Revision 1.2, Section 3.2.3, page 26.
100
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-67. Bit Descriptions – Power Management Capabilities Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
5
DSI
r
Device-specific initialization. This bit returns 0 when read, which indicates that the
XIO3130 does not require special initialization beyond the standard PCI configuration
header before a generic class driver is able to use it.
4
RSVD
r
Reserved. When read, this bit returns zero.
3
PME_CLK
r
PME clock. This bit returns zero, which indicates that the PCI clock is not needed to
generate PME.
2:0
PM_VERSION
r
Power management version. This field returns 3’b011, which indicates Revision 1.2
compatibility.
4.3.33 Power Management Control/Status Register
This register determines and changes the current power state of the downstream port.
PCI register offset:
54h
Register type:
Read/Write; Read Only; Clear by a Write of One; Hardware Update; Sticky
Default value:
0008h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
1
2
0
1
0
0
0
Table 4-68. Bit Descriptions – Power Management Control/Status Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
PME status. PME events are generated due to PCI Hot Plug events. This bit reflects the
PME status regardless of the state of PME_EN.
15
PME_STAT
rcuh
0 – No PME event pending
1 – PME event pending
This bit is reset with GRST.
14:13
DATA_SCALE
r
Data scale. This 2-bit field returns 0s when read since the XIO3130 does not use the Data
register.
12:9
DATA_SEL
r
Data select. This 4-bit field returns 0s when read since the XIO3130 does not use the Data
register.
PME enable. This bit enables PME/WAKE signaling, even though the XIO3130 never
generates WAKE .
8
PME_EN
rwh
0 – Disable PME signaling.
1 – Enable PME signaling.
This bit is reset with GRST.
7:4
3
RSVD
NO_SOFT_RST
r
r
Reserved. When read, these bits return zeros.
No Soft Reset. This bit controls whether the transition from D3hot to D0 resets the state
according to PCI Power Management Specification Revision 1.2. This bit is hardwired to
1’b1.
0 – D3hot to D0 transition causes reset.
1 – D3hot to D0 transition does not cause reset.
2
RSVD
r
Reserved. When read, this bit returns zero.
Power state. This 2-bit field is used to determine the current power state of the function and
to set the function into a new power state. This field is encoded as follows:
00 = D0
1:0
PWR_STATE
rw
01 = D1
10 = D2
11 = D3hot
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
101
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.3.34 Power Management Bridge Support Extension Register
This read-only register is used to indicate to the host software what the state of the downstream port’s
secondary bus will be when the downstream port is placed in D3.
PCI register offset:
56h
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-69. Bit Descriptions – PM Bridge Support Extension Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
7
BPCC
r
Bus power/Clock control enable. This bit is read-only zero. This bit does not apply to PCI
Express.
6
BSTATE
r
B2/B3 support. This bit is read-only zero. This bit does not apply to PCI Express.
5:0
RSVD
r
Reserved. When read, these bits return zeros.
4.3.35 Power Management Data Register
The read-only register is not applicable to the XIO3130 and returns 00h when read.
PCI register offset:
57h
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.36 MSI Capability ID Register
This read-only register identifies the linked list item as the register for Message Signaled Interrupts
Capabilities. The register returns 05h when read.
PCI register offset:
70h
Register type:
Read only
Default value:
05h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
1
1
0
0
1
4.3.37 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130. This register reads 80h, which points to the Subsystem ID and Subsystem Vendor ID
Capabilities registers.
102
PCI register offset:
71h
Register type:
Read only
Default value:
80h
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
BIT NUMBER
RESET STATE
7
1
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.38 MSI Message Control Register
This register is used to control the sending of MSI messages.
PCI register offset:
72h
Register type:
Read/Write; Read Only
Default value:
0080h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
1
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-70. Bit Descriptions – MSI Message Control Register
BIT
FIELD NAME
ACCESS
15:8
RSVD
r
Reserved. When read, these bits return zeros.
DESCRIPTION
7
64CAP
r
64-bit message capability. This bit is read-only 1, which indicates that the XIO3130 downstream
port supports 64-bit MSI message addressing.
Multiple message enable. This field indicates the number of distinct messages that the XIO3130
downstream port is allowed to generate.
000 – 1 message
001 – 2 messages
010 – 4 messages
6:4
MM_EN
rw
011 – 8 messages
100 – 16 messages
101 – 32 messages
110 – Reserved
111 – Reserved
3:1
MM_CAP
r
Multiple message capabilities. This field indicates the number of distinct messages that the
XIO3130 downstream port can generate. This field is read-only 000, which indicates that the
downstream port can signal one interrupt.
MSI Enable. This bit is used to enable MSI interrupt signaling. The software must enable MSI
signaling for the XIO3130 downstream port to send MSI messages.
0
MSI_EN
rw
0 – MSI signaling is prohibited
1 – MSI signaling is enabled
4.3.39 MSI Message Address Register
This register contains the lower 32 bits of the address that an MSI message shall be written to when an
interrupt is to be signaled.
PCI register offset:
74h
Register type:
Read/Write; Read Only
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
103
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-71. Bit Descriptions – MSI Message Address Register
BIT
FIELD NAME
ACCESS
31:2
ADDRESS
rw
1:0
RSVD
r
DESCRIPTION
System-specified message address.
Reserved. When read, these bits return zeros.
4.3.40 MSI Message Upper Address Register
This read/write register contains the upper 32 bits of the address that a MSI message shall be written to
when an interrupt is to be signaled. If this register is 0000 0000h, 32-bit addressing is used in the MSI
Message packet. Otherwise, 64-bit addressing is used.
PCI register offset:
78h
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.41 MSI Message Data Register
This register contains the data that the software programmed the device to send when it sends an MSI
message.
PCI register offset:
7Ch
Register type:
Read/Write
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-72. Bit Descriptions – MSI Data Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:4
MSG
rw
System-specific message. This field contains the portion of the message that the XIO3130 can
never modify.
3:0
MSG_NUM
rw
Message number. This portion of the message field may be modified to contain the message
number if multiple messages are enabled. Since the XIO3130 downstream port only generates
one MSI type, the XIO3130 hardware does not modify these bits.
4.3.42 Capability ID Register
This read-only register identifies the linked list item as the register for Subsystem ID and Subsystem
Vendor ID Capabilities. This register returns 0Dh when read.
104
PCI register offset:
80h
Register type:
Read only
Default value:
0Dh
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
BIT NUMBER
RESET STATE
SLLS693F – MAY 2007 – REVISED JANUARY 2010
7
0
6
0
5
0
4
0
3
1
2
1
1
0
0
1
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
105
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.3.43 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130 downstream port. This register reads 90h, which points to the PCI Express Capabilities registers.
PCI register offset:
81h
Register type:
Read only
Default value:
90h
BIT NUMBER
RESET STATE
7
1
6
0
5
0
4
1
3
0
2
0
1
0
0
0
4.3.44 Subsystem Vendor ID Register
This register is used for system and option card identification and may be required for certain operating
systems. This read-only register is a direct reflection of the upstream port’s Subsystem Access register,
which is read/write and is initialized through the EEPROM (if present).
PCI register offset:
84h
Register type:
Read only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.45 Subsystem ID Register
This register is used for system and option card identification and may be required for certain operating
systems. This read-only register is a direct reflection of the upstream port’s Subsystem Access register,
which is read/write and is initialized through the EEPROM (if present).
PCI register offset:
86h
Register type:
Read only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.46 PCI Express Capability ID Register
This read-only register identifies the linked list item as the register for PCI Express Capabilities. When
read, this register returns 10h.
PCI register offset:
90h
Register type:
Read only
Default value:
10h
BIT NUMBER
RESET STATE
106
7
0
6
0
5
0
4
1
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
4.3.47 Next-Item Pointer Register
The contents of this read-only register indicate the next item in the linked list of capabilities for the
XIO3130 downstream port. This register reads 00h, which indicates that no additional capabilities are
supported.
PCI register offset:
91h
Register type:
Read only
Default value:
00h
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.48 PCI Express Capabilities Register
This register indicates the capabilities of the downstream port of the XIO3130 related to PCI Express.
PCI register offset:
92h
Register type:
Read only
Default value:
0061h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
1
5
1
4
0
3
0
2
0
1
0
0
1
Table 4-73. Bit Descriptions – PCI Express Capabilities Register
BIT
FIELD NAME
ACCESS
15:14
RSVD
r
Reserved. When read, these bits return zeros.
13:9
INT_NUM
r
Interrupt message number. This field is used for MSI support and is implemented as read-only
zero.
8
SLOT
r
DESCRIPTION
Slot implemented. This bit indicates whether the port is connected to a slot connector (e.g., for
PCI Express, ExpressCard™ or other add-in cards). This field can be programmed by writing to
the General Control register.
0 – Port not connected to a slot
1 – Port connected to a slot
7:4
DEV_TYPE
r
Device/Port type. This read-only field returns 0110b, which indicates that the device is a
downstream port of a PCI Express XIO3130.
3:0
VERSION
r
Capability version. This field returns 0001b, which indicates revision 1 of the PCI Express
capability.
4.3.49 Device Capabilities Register
The Device Capabilities register indicates the device-specific capabilities of the XIO3130 downstream port.
PCI register offset:
94h
Register type:
Read Only; Hardware Update
Default value:
0000 8XX1h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
1
14
0
13
0
12
0
11
u
10
u
9
u
8
v
7
v
6
v
5
0
4
0
3
0
2
0
1
0
0
1
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
107
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-74. Bit Descriptions – Device Capabilities Register
BIT
FIELD NAME
ACCESS
31:28
RSVD
r
Reserved. When read, these bits return zeros.
DESCRIPTION
27:26
CSPLS
ru
Captured slot power limit scale. This field is only applicable to upstream ports and is
hardwired to zero.
25:18
CSPLV
ru
Captured slot power limit value. This field is only applicable to upstream ports and is
hardwired to zero.
17:16
RSVD
r
Reserved. When read, these bits return zeros.
15
RBER
r
Role-based error reporting. This bit is set to 1b to indicate support for role-based error
reporting.
14
PIP
r
Power indicator present. This bit indicates whether the XIO3130 has a power indicator. This
bit is hardwired to zero.
13
AIP
r
Attention indicator present. This bit indicates whether the XIO3130 has an attention
indicator. This bit is hardwired to zero.
12
ABP
r
Attention button present. This bit indicates whether the XIO3130 has a power button. This bit
is hardwired to zero.
11:6
RSVD
r
Reserved. When read, these bits return zeros.
5
ETFS
r
Extended tag field supported. This bit indicates the size of the tag field supported. This bit is
hardwired to 0, which indicates support for 5-bit tag fields.
4:3
PFS
r
Phantom functions supported. This field is read-only 00b, which indicates that function
numbers are not used for phantom functions.
2:0
MPSS
r
Max payload size supported. This field indicates the maximum payload size that the device
can support for TLPs. This field is encoded as 001b, which indicates that the maximum
payload size for a TLP is 256 bytes.
4.3.50 Device Control Register
The Device Control register controls PCI Express device-specific parameters.
PCI register offset:
98h
Register type:
Read/Write; Read Only
Default value:
2000h
BIT NUMBER
RESET STATE
15
0
14
0
13
1
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-75. Bit Descriptions – Device Control Register
BIT
FIELD NAME
ACCESS
15
RSVD
r
DESCRIPTION
Reserved. When read, this bit returns zero.
Max read request size. This field is programmed by the host software to set the maximum
size of a read request that the XIO3130 can generate. The XIO3130 uses this field in
conjunction with the Cache Line Size register to determine how much data to fetch on a
read request. This field is encoded as:
000 – 128B
001 – 256B
14:12
MRRS
rw
010 – 512B (default)
011 – 1024B
100 – 2048B
101 – 4096B
110 – Reserved
111 – Reserved
11
108
ENS
r
Enable no snoop. Since the XIO3130 does not support setting the no-snoop attribute, this bit
is read-only zero.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-75. Bit Descriptions – Device Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
10
APPE
r
Auxiliary power PM enable. This bit is read-only zero, since the XIO3130 requires a minimal
amount of AUX power when PME is disabled.
9
PFE
r
Phantom function enable. Since the XIO3130 part does not support phantom functions, this
bit is read-only zero.
8
ETFE
r
Extended tag field enable. Since the XIO3130 part does not support extended tags, this bit
is read-only zero.
Max payload size. This field is programmed by the host software to set the maximum size of
posted writes or read completions that the XIO3130 can initiate. This field is encoded as:
000 – 128B (default)
001 – 256B
010 – 512B
7:5
MPS
rw
011 – 1024B
100 – 2048B
101 – 4096B
110 – Reserved
111 – Reserved
4
3
ERO
Enable relaxed ordering. Since the XIO3130 part does not support relaxed ordering, this bit
is read-only zero.
r
URRE
Unsupported request reporting enable. If this bit is set, the XIO3130 is enabled to send
ERR_NONFATAL messages to the root complex when an unsupported request is received
by the downstream port.
rw
0 – Do not report unsupported requests to the root complex.
1 – Report unsupported requests to the root complex.
Fatal error reporting enable. If this bit is set, the XIO3130 is enabled to send ERR_FATAL
messages to the root complex when a system error event occurs.
2
FERE
rw
0 – Do not report fatal errors to the root complex.
1 – Report fatal errors to the root complex.
Nonfatal error reporting enable. If this bit is set, the XIO3130 is enabled to send
ERR_NONFATAL messages to the root complex when a system error event occurs.
1
NFERE
rw
0 – Do not report nonfatal errors to the root complex.
1 – Report nonfatal errors to the root complex.
Correctable error reporting enable. If this bit is set, the XIO3130 is enabled to send
ERR_CORR messages to the root complex when a system error event occurs.
0
CERE
rw
0 – Do not report correctable errors to the root complex.
1 – Report correctable errors to the root complex.
4.3.51 Device Status Register
The Device Status register controls PCI Express device-specific parameters.
PCI register offset:
9Ah
Register type:
Read Only; Clear by a Write of One; Hardware Update
Default value:
00X0h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
x
3
0
2
0
1
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
0
0
109
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-76. Bit Descriptions – Device Status Register
BIT
FIELD NAME
ACCESS
15:6
RSVD
r
Reserved. When read, these bits return zeros.
5
PEND
ru
Transaction pending. This bit is set when the XIO3130 downstream port has issued a
non-posted transaction that has not been completed yet.
4
APD
DESCRIPTION
AUX power detected. This bit indicates that AUX power is present. This bit is a direct
reflection of the AUX_PRSNT bit in the Global Chip Control register, and it has the same
default value.
ru
0 – No AUX power detected.
1 – AUX power detected.
3
URD
rcu
Unsupported Request detected. This bit is asserted when an Unsupported Request error is
detected (i.e., when a request is received that results in sending a completion with an
Unsupported Request status). Errors are logged in this bit regardless of whether error
reporting is enabled in the Device Control register.
2
FED
rcu
Fatal error detected. This bit is set by the XIO3130 when a fatal error is detected. Errors
are logged in this bit regardless of whether error reporting is enabled in the Device Control
register.
1
NFED
rcu
Nonfatal error detected. This bit is set by the XIO3130 when a nonfatal error is detected.
Errors are logged in this bit regardless of whether error reporting is enabled in the Device
Control register.
0
CED
rcu
Correctable error detected. This bit is set by the XIO3130 when a correctable error is
detected. Errors are logged in this bit regardless of whether error reporting is enabled in
the Device Control register.
4.3.52 Link Capabilities Register
The Link Capabilities register indicates the link-specific capabilities of the XIO3130 downstream port.
PCI register offset:
9Ch
Register type:
Read only
Default value:
0XXX XC11h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
x
24
x
23
0
22
0
21
0
20
w
19
w
18
1
17
y
16
y
BIT NUMBER
RESET STATE
15
y
14
z
13
z
12
z
11
1
10
1
9
0
8
0
7
0
6
0
5
0
4
1
3
0
2
0
1
0
0
1
Table 4-77. Bit Descriptions – Link Capabilities Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
31:24
PORT_NUM
r
Port number. This field indicates the port number for the PCI Express link. This field is set to
8’h01 for downstream port 0, 8’h02 for downstream port 1, and 8’h03 for downstream port 2.
23:21
RSVD
r
Reserved. When read, these bits return zeros.
r
Data link layer link active reporting capable. This bit indicates whether this slot is capable of
reporting whether the link is active. This field can be programmed by writing to the General
Control register. The default state w is that of the LINK_ACT_RPT_CAP field in the General
Control register.
20
DLL_LARC
0 – Incapable of link active reporting
1 – Capable of link active reporting
19
SDERC
r
Surprise down error reporting capable. This bit indicates whether this slot is capable of
detecting and reporting a surprise down error condition. This field can be programmed by
writing to the LINK_ACT_RPT_CAP field in the General Control register. The default state w is
that of the LINK_ACT_RPT_CAP field in the General Control register.
0 – Incapable of detecting and reporting a surprise down error condition
1 – Capable of detecting and reporting a surprise down error condition
18
110
CPM
r
Clock power management. This bit is 1b, which indicates support for CLKREQ.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-77. Bit Descriptions – Link Capabilities Register (continued)
BIT
17:15
FIELD NAME
ACCESS
L1_LATENCY
DESCRIPTION
r
L1 exit latency. This field indicates the time required to transition from the L1 state to the L0
state. This field is a direct reflection of the Downstream Ports Link PM Latency register
L1_EXIT_LAT field, which is a read/write field that is loaded from EEPROM (if present). The
default value of this field is yyy, which is the same as the default value of the Link PM Latency
register L1_EXIT_LAT field.
14:12
L0S_LATENCY
r
L0s exit latency. This field indicates the time required to transition from the L0s state to the L0
state. This field is a direct reflection of the Downstream Ports Link PM Latency register
L0S_EXIT_LAT field, which is a read/write field that is loaded from EEPROM (if present). The
default value of this field is zzz, which is the same as the default value of the Link PM Latency
register L0S_EXIT_LAT field.
11:10
ASLPMS
r
Active State Link PM support. This field reads 11b, which indicates that the XIO3130 supports
both L0s and L1 for Active State Link PM.
9:4
MLW
r
Maximum link width. This field is encoded 000001b to indicate that the XIO3130 downstream
port supports only an x1 PCI Express link.
3:0
MLS
r
Maximum link speed. This field is encoded 0001b to indicate that the XIO3130 downstream
port supports a maximum link speed of 2.5 Gb/s.
4.3.53 Link Control Register
The Link Control register is used to control link-specific behavior.
PCI register offset:
A0h
Register type:
Read/Write; Read Only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-78. Bit Descriptions – Link Control Register
BIT
FIELD NAME
ACCESS
15:9
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
Clock power management enable. When CLKREQ support is enabled, the EP_LI_LAT field in
the Downstream Ports Link PM Latency register increases due to link PLL locking requirements.
8
CPM_EN
rw
0 – Disables CLKREQ support on downstream port
1 – Enables CLKREQ support on downstream port
Extended synch. This bit is used to force the XIO3130 downstream port to extend the
transmission of FTS ordered sets and an extra TS2 when exiting from L1 before entering to L0.
7
ES
rw
0 – Normal synch
1 – Extended synch
6
CCC
rw
Common clock configuration. This bit is set when a common clock is provided to both ends of
the downstream port’s PCI Express link. This bit can be used to change the L0s and L1 exit
latencies.
0 – Reference clock is asynchronous
1 – Reference clock is synchronous
Retrain link. This bit initiates link retraining on the downstream port. This bit always returns 0b
when read.
5
RL
rw
0 – Do not initiate link retraining
1 – Initiate link retraining
Link disable. This bit disables the link. Writes to this bit are immediately reflected in the value
read from the bit, regardless of the actual link state.
4
LD
rw
0 – Link enabled
1 – Link disabled
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
111
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-78. Bit Descriptions – Link Control Register (continued)
BIT
3
FIELD NAME
ACCESS
DESCRIPTION
r
Read completion boundary. This bit specifies the minimum size read completion packet that the
XIO3130 can send when breaking a read request into multiple completion packets. This field is
not applicable to XIO3130; i.e., the XIO3130 does not break up completion packets and is
hardwired to zero.
RCB
0 – 64 bytes
1 – 128 bytes
2
RSVD
r
Reserved. When read, this bit returns zero.
Active State Link PM Control. This field is used to enable and disable active state PM.
00 – Active State PM disabled
1:0
ASLPMC
rw
01 – L0s entry enabled
10 – Reserved
11 – L0s and L1 entry enabled
4.3.54 Link Status Register
The Link Status register indicates the current state of the PCI Express Link.
PCI register offset:
A2h
Register type:
Read Only; Hardware Update
Default value:
XX11h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
1
11
0
10
x
9
0
8
0
7
0
6
0
5
0
4
1
3
0
2
0
1
0
0
1
Table 4-79. Bit Descriptions – Link Status Register
BIT
FIELD NAME
ACCESS
15:14
RSVD
r
Reserved. When read, these bits return zeros.
DESCRIPTION
13
DLL_ACTV
r
Data link layer active. When the DLL_LARC field in the Link Capabilities register is asserted,
this field returns the value of the following comparison: (Link_State == DL_Active). This field
returns zero when the DLL_LARC field in the Link Capabilities register is de-asserted.
12
SCC
r
Slot clock configuration. This bit reflects the reference clock configurations and is read-only 1,
indicating that a 100 MHz common clock reference is used.
11
LT
ru
Link training in progress. The hardware automatically clears this bit when the LTSSM exits the
Configuration/Recovery state.
10
UNDEF
r
Undefined. The value read from this bit is undefined.
9:4
NLW
r
Negotiated link width. This field is read-only 000001b, which indicates that the lane width is x1.
3:0
LS
r
Link speed. This field is read-only 0001b, which indicates that the link speed is 2.5 Gb/s.
4.3.55 Slot Capabilities Register
The Slot Capabilities register indicates the slot-specific capabilities of the downstream port.
PCI register offset:
A4h
Register type:
Read/Write; Read Only; Hardware Update
Default value:
0000 0060h
BIT NUMBER
RESET STATE
112
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
XIO3130 Configuration Register Space
22
0
21
0
20
0
19
0
18
0
17
0
16
0
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
1
5
1
4
0
3
0
2
0
1
0
0
0
Table 4-80. Bit Descriptions – Slot Capabilities Register
BIT
31:19
18
FIELD NAME
SLOT_NUM
EMILP
ACCESS
r
ru
DESCRIPTION
Physical slot number. This field indicates a system-dependent physical slot number that is
unique to each slot in the system. This field can be programmed by writing to the General
Slot Info register.
Electromechanical interlock present. This bit indicates whether an electromechanical
interlock is implemented on the chassis for this slot. This bit can be programmed by writing
to the General Control register.
0 – Electromechanical interlock not present.
1 – Electromechanical interlock present.
No command completed support. This bit is hardwired to zero, which indicates that
command completed software notification (i.e., interrupt generation) is always supported.
17
NCCS
ru
0 – Command completed support is provided.
1 – Command completed support is not provided.
Slot power limit scale. This field Indicates the scale that is used for the slow power limit
value. This field may be written only once after any given PERST; the effect when written is
to cause the port to send the Set_Slot_Power_Limit message.
00 – 1.0x
16:15
SPLS
rw
01 – 0.1x
10 – 0.01x
11 – 0.001x
This field is loaded from EEPROM (if present) and reset with PERST.
14:7
SPLV
rw
Slot power limit value. When multiplied by the SPLS field (see previous row in this table), this
field indicates the maximum power in watts that can be consumed by a card plugged into a
slot attached to this port,. This field may be written only once after any given PERST; the
effect when written is to cause the port to send the Set_Slot_Power_Limit message.
This field is loaded from EEPROM (if present) and reset with PERST.
6
HP_CAPABLE
r
PCI Hot Plug capable. This bit indicates whether this slot is capable of supporting PCI Hot
Plug operations. The default setting of this register is defined by the DPSTRP[2,0] strapping.
This bit can be programmed by writing to the General Control register bit 14, which is
SLOT_HPC. For more information on the General Control register, see section 3.3.61.
0 – Incapable of supporting PCI Hot Plug operations
1 – Capable of supporting PCI Hot Plug operations
5
HP_SURPRISE
r
PCI Hot Plug surprise. This bit indicates whether a device present in this slot can be
removed from the system without any prior notification. This bit can be programmed by
writing to the General Control register bit 13, which is SLOT_HPS. For more information on
the General Control register, see section 3.3.61.
0 – No device present that can be removed by surprise
1 – Device present that can be removed by surprise
4
PIP
r
Power indicator present. This bit indicates whether a power indicator is implemented on the
chassis for this slot. This bit can be programmed by writing to the General Control register bit
12, which is SLOT_PIP. For more information on the General Control register, see section
3.3.61.
0 – Power indicator not present
1 – Power indicator present
3
AIP
r
Attention indicator present. This bit indicates whether an attention indicator is implemented
on the chassis for this slot. This bit can be programmed by writing to the General Control
register bit 11, which is SLOT_AIP. For more information on the General Control register,
see section 3.3.61.
0 – Attention indicator not present
1 – Attention indicator present
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
113
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-80. Bit Descriptions – Slot Capabilities Register (continued)
BIT
2
FIELD NAME
ACCESS
MRLSP
DESCRIPTION
Manual retention latch sensor present. This bit indicates whether a manual retention latch
(MRL) sensor is implemented on the chassis for this slot. This bit can be programmed by
writing to the General Control register bit 10, which is SLOT_MRLSP. For more information
on the General Control register, see section 3.3.61.
r
0 – MRL sensor not present
1 – MRL sensor present
1
PCP
Power controller present. This bit indicates whether a power controller is implemented for
this slot. The default setting of this register is defined by the DPSTRP[2,0] strapping. This bit
can be programmed by writing to the General Control register bit 9, which is SLOT_PCP. For
more information on the General Control Register, see section 3.3.61. If this bit is zero, then
the PWRON_EC output signal, which may go to a pin, is forced asserted; there is no such
effect on the PWRON output signal.
r
0 – Power controller not present
1 – Power controller present
0
ABP
Attention button present. This bit indicates whether an attention button is implemented on the
chassis for this slot. This bit can be programmed by writing to the General Control register bit
8, which is SLOT_ABP. For more information on the General Control register, see section
3.3.61.
r
0 – Attention button not present
1 – Attention button present
4.3.56 Slot Control Register
The Slot Control register controls slot-specific parameters.
PCI register offset:
A8h
Register type:
Read/Write; Read Only
Default value:
07C0h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
1
9
1
8
1
7
1
6
1
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-81. Bit Descriptions – Slot Control Register
BIT
FIELD NAME
ACCESS
15:13
RSVD
r
DESCRIPTION
Reserved. When read, these bits return zeros.
Data link layer state changed enable. This bit enables software notification (i.e., interrupts) due to
an assertion of the DLLSC field in the Slot Status register.
12
DLLSC_EN
rw
0 – DLLSC interrupts disabled
1 – DLLSC interrupts enabled
11
10
EMIL_CTL
PC_CTL
rw
rw
Electromechanical interlock control. When read, this bit returns zero. A write of 1’b0 has no effect.
If the EMILP field in the Slot Capabilities register is asserted, then a write of 1’b1 causes a 100 ms
high-going pulse on the EMIL_CTL output pin; otherwise, the write has no effect.
Power controller control. When read, this bit indicates the current state of power applied to the
slot. Writes set the power state of the slot and control the PWR_ON pin. When this bit transitions
from power on to power off, and the HP_PME_MSG_EN bit in the Global Switch Control register
is asserted, a PME_Turn_Off message is sent and the PWRON output pin gets de-asserted only
after a PME_TO_Ack is received or after a 100 ms timeout.
0 – Power on
1 – Power off
114
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-81. Bit Descriptions – Slot Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
Power indicator control. When read, this field indicates the current state of the power indicator.
Writes set the power indicator state. When writes cause this field to change, the appropriate
POWER_INDICATOR_* messages are sent. This bit controls the PWR_LED output pin.
9:8
PI_CTL
rw
00b – Reserved
01b – On
10b – Blinking
11b – Off
Attention indicator control. When read, this field indicates the current state of the attention
indicator. Writes set the attention indicator state. When writes cause this field to change, the
appropriate ATTENTION_INDICATOR_* messages are sent. This bit controls the ATN_LED
output pin.
7:6
AI_CTL
rw
00b – Reserved
01b – On
10b – Blinking
11b – Off
PCI Hot Plug interrupt enable. This bit enables generation of PCI Hot Plug interrupts on enabled
PCI Hot Plug events.
5
HPI_EN
rw
0 – PCI Hot Plug interrupts disabled
1 – PCI Hot Plug interrupts enabled
4
CCI_EN
rw
Command-completed interrupt enable. This bit enables generation of an interrupt upon completion
of a command by the PCI Hot Plug Controller. HPI_EN, and MSI_EN (see MSI Message Control
register) must also be enabled for interrupt generation. A Hot Plug Controller Command is defined
as a state change in any of the *_CTL bits in this register (i.e., software writes).
0 – Command-completed interrupts disabled
1 – Command-completed interrupts enabled
Presence detect changed enable. This bit enables generation of a
•＝＝＝＝＝＝＝＝＝ PCI Hot Plug interrupt
•＝＝＝＝＝＝＝＝＝ PME
when the PDC bit in the Slot Status register is asserted.
3
PDC_EN
rw
0 – Disabled
1 – Enabled
HPI_EN and MSI_EN (see MSI Message Control register) must also be enabled for interrupt
generation. PME_EN must also be enabled for PME signaling during D1, D2, or D3hot. For more
information, see section 6.7.7 in PCI Express Base Specification Revision 1.0a.
Manual retention latch sensor changed enable. This bit enables generation of a
•＝＝＝＝＝＝＝＝＝ PCI Hot Plug interrupt
•＝＝＝＝＝＝＝＝＝ PME
when the MRLSC bit in the Slot Status register is asserted.
2
MRLSC_EN
rw
0 – Disabled
1 – Enabled
HPI_EN and MSI_EN (see MSI Message Control register) must also be enabled for interrupt
generation. PME_EN must also be enabled for PME signaling during D1, D2, or D3hot. For more
information, see section 6.7.7 in PCI Express Base Specification Revision 1.0a.
Power fault detected enable. This bit enables generation of a
•＝＝＝＝＝＝＝＝＝ PCI Hot Plug interrupt
•＝＝＝＝＝＝＝＝＝ PME
when the PFD bit in the Slot Status register is asserted.
1
PFD_EN
rw
0 – Disabled
1 – Enabled
HPI_EN and MSI_EN (see MSI Message Control register) must also be enabled for interrupt
generation. PME_EN must also be enabled for PME signaling during D1, D2, or D3hot. For more
information, see section 6.7.7 in PCI Express Base Specification Revision 1.0a.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
115
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-81. Bit Descriptions – Slot Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
Attention button pressed enable. This bit enables generation of a
•＝＝＝＝＝＝＝＝＝ PCI Hot Plug interrupt
•＝＝＝＝＝＝＝＝＝ PME
when the ABP bit in the Slot Status register is asserted.
0
ABP_EN
rw
0 – Disabled
1 – Enabled
HPI_EN and MSI_EN (see Table 3ἱ21) must also be enabled for interrupt generation. PME_EN
must also be enabled for PME signaling during D1, D2, or D3hot. For more information, see
section 6.7.7 in PCI Express Base Specification Revision 1.0a.
4.3.57 Slot Status Register
The Slot Status register provides information about slot-specific parameters.
PCI register offset:
AAh
Register type:
Read Only; Clear by a Write of One; Hardware Update
Default value:
0010h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
1
3
0
2
0
1
0
0
0
Table 4-82. Bit Descriptions – Slot Status Register
BIT
FIELD NAME
ACCESS
15:9
RSVD
r
8
DLLSC
ruc
DESCRIPTION
Reserved. When read, these bits return zeros.
Data link layer state changed. This bit is set when the DLL_ACTV field in the Link Status
register changes state. A write of 1’b1 clears this field. A write of 1’b0 has no effect.
Electromechanical interlock status. If an electromechanical interlock is implemented for the
slot, this field indicates the current status of the electromechanical interlock.
7
EMIL_STAT
r
0 – Electromechanical interlock disengaged
1 – Electromechanical interlock engaged
6
PDS
ru
Presence detect state. This bit indicates whether a card is present in a slot. If the
SLOT_PRSNT bit in the General Control register is de-asserted, this bit always reads back
asserted. If the SLOT_PRSNT bit is asserted, this bit indicates the state of a de-bounced
derivative of the PRSNT input pin.
0 – Card presence detection output de-asserted (i.e., slot empty)
1 – Card presence detection output asserted (i.e., card present in slot)
Manual retention latch sensor state. This bit indicates the state of a de-bounced derivative of
the MRLS_DET input pin.
5
MRLSS
ru
0 – MRLS_DET pin asserted (i.e., MRL closed)
1 – MRLS_DET pin de-asserted (i.e., MRL open)
4
CC
ruc
Command completed. This bit is set when the PCI Hot Plug Controller is ready to accept
another command; it does not ensure that the previous command is completely finished. A
Hot Plug controller command is defined as a state change in any of the *_CTL bits in the Slot
Control register (i.e., software writes).
0 – PCI Hot Plug controller is not ready to accept a new command.
1 – PCI Hot Plug controller is ready to accept a new command.
Presence detect changed. This bit indicates whether the state of the PDS bit has changed.
3
PDC
ruc
0 – PDS bit has not changed.
1 – PDS bit has changed.
116
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-82. Bit Descriptions – Slot Status Register (continued)
BIT
FIELD NAME
ACCESS
2
MRLSC
ruc
DESCRIPTION
MRL sensor changed. This bit indicates whether the state of the MRLSS bit has changed.
0 – MRLSS bit has not changed.
1 – MRLSS bit has changed.
Power fault detected. This bit indicates the state of the PWRFLT pin.
1
PFD
ruc
0 – PWRFLT pin de-asserted (no power fault at slot).
1 – PWRFLT pin asserted (power fault at slot).
Attention button pressed. This bit indicates a de-asserted-to-asserted transition on a
de-bounced derivative of the ATN_BTN pin.
0
ABP
ruc
0 – Attention button not pressed
1 – Attention button pressed
4.3.58 TI Proprietary Register
This read/write TI proprietary register is located at offset C8h and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
If an EEPROM is used to load configuration registers, the value loaded for this register must be 0000
0001h.
PCI register offset:
C8h
Register type:
Read/Write
Default value:
xxxx 0001
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.3.59 TI Proprietary Register
This read/write TI proprietary register is located at offset CCh and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
If an EEPROM is used to load configuration registers, the value loaded for this register must be 0000
0000h.
PCI register offset:
CCh
Register type:
Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
117
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
4.3.60 TI Proprietary Register
This read/write TI proprietary register is located at offset D0h and controls TI proprietary functions. This
register must not be changed from the specified default state. If the default value is changed in error, a
PCI Express Reset (PERST) returns this register to a default state.
If an EEPROM is used to load configuration registers, the value loaded for this register must be 3214
0000h.
PCI register offset:
D0h
Register type:
Read/Write
Default value:
3214 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
1
28
1
27
0
26
0
25
1
24
0
23
0
22
0
21
0
20
1
19
0
18
1
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.61 General Control Register
This read/write register is used to control various functions of the XIO3130 downstream port.
PCI register offset:
D4h
Register type:
Read/Write; Read Only
Default value:
0000 x0xx
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
x
13
x
12
0
11
0
10
0
9
0
8
0
7
x
6
0
5
0
4
1
3
0
2
0
1
0
0
x
Table 4-83. Bit Descriptions – General Control Register
BIT
FIELD NAME
ACCESS
31:17
RSVD
r
16
TI_PROPRIETARY
rw
DESCRIPTION
Reserved. When read, these bits return zeros.
TI proprietary. This bit must not be changed from the specified default state.
REFCK power fault control. This bit controls whether REFCK output should be disabled when
PWR_FAULT is asserted.
15
RC_PF_CTL
rw
0 – REFCK output enable is not a function of PWR_FAULT.
1 – REFCK output enable is a function of PWR_FAULT.
This field is loaded from EEPROM (if present) and reset with PERST.
PCI Hot Plug capable. This bit indicates whether this slot is capable of PCI Hot Plug operations.
This bit is used to control the PCI Hot Plug capable (HPC) field in the Slot Capabilities register.
14
SLOT_HPC
rw
0 – Slot is not PCI Hot Plug capable.
1 – Slot is PCI Hot Plug capable.
This field is loaded from EEPROM (if present) and reset with PERST. The default value for this
bit is that of the DNn_DPSTRP pin for the associated port.
118
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-83. Bit Descriptions – General Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
PCI Hot Plug surprise. This bit indicates whether a device present in this slot can be removed
from the system without prior notification. This bit is used to control the PCI Hot Plug surprise
(HPS) field in the Slot Capabilities register.
13
SLOT_HPS
rw
0 – No device present that can be removed without prior notification
1 – Device present that can be removed without prior notification.
This field is loaded from EEPROM (if present) and reset with PERST. The default value for this
bit is that of the DNn_DPSTRP pin for the associated port.
Power indicator present. This bit indicates whether a power indicator is implemented on the
chassis for this slot. This bit is used to control the PIP field in the Slot Capabilities register.
12
SLOT_PIP
rw
0 – Power indicator not implemented
1 – Power indicator implemented
This field is loaded from EEPROM (if present) and reset with PERST.
Attention indicator present. This bit indicates whether an attention indicator is implemented on
the chassis for this slot. This bit is used to control the AIP field in the Slot Capabilities register.
11
SLOT_AIP
rw
0 – Attention indicator not implemented
1 – Attention indicator implemented
This field is loaded from EEPROM (if present) and reset with PERST.
Manual retention latch sensor present. This bit indicates whether an MRL sensor is
implemented on the chassis for this slot. This bit is used to control the MRLSP field in the Slot
Capabilities register.
10
SLOT_MRLSP
rw
0 – MRL sensor not implemented
1 – MRL sensor implemented
This field is loaded from EEPROM (if present) and reset with PERST.
Power controller present. This bit indicates whether a power controller is implemented for this
slot to control power. This bit is used to control the power controller present (PCP) field in the
Slot Capabilities register.
9
SLOT_PCP
rw
0 – Power controller not implemented
1 – Power controller implemented
This field is loaded from EEPROM (if present) and reset with PERST.
Attention button present. This bit indicates whether an attention button is implemented on the
chassis for this slot. This bit is used to control the attention button present (ABP) field in the Slot
Capabilities register.
8
SLOT_ABP
rw
0 – Attention button not implemented
1 – Attention button implemented
This field is loaded from EEPROM (if present) and reset with PERST.
Slot implemented. This bit indicates that the downstream port is connected to an add-in card
slot (e.g., PCI Express, ExpressCard, etc.). This bit is used to control the SLOT bit in the PCI
Express Capabilities register.
7
SLOT_PRSNT
rw
0 – Port not connected to slot
1 – Port connected to slot
This field is loaded from EEPROM (if present) and reset with PERST. The default value for this
bit is that of the DNn_DPSTRP pin for the associated port.
Power fault input present. This bit indicates whether an input pin is used as a power fault
detection input for this slot. This bit is used to control whether the power fault input pin is used,
e.g., for disabling the REFCLK output buffer.
6
SLOT_PFIP
rw
0 – Power fault input not implemented
1 – Power fault input implemented
This field is loaded from EEPROM (if present) and reset with PERST.
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
119
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-83. Bit Descriptions – General Control Register (continued)
BIT
FIELD NAME
ACCESS
DESCRIPTION
Electromechanical interlock present. This bit indicates whether an electromechanical interlock is
implemented on the chassis for this slot. This bit is used to control the EMILP field in the Slot
Capabilities register.
5
SLOT_EMILP
rw
0 – Electromechanical interlock not implemented
1 – Electromechanical interlock implemented
This field is loaded from EEPROM (if present) and reset with PERST.
4
Link active reporting capable. This bit indicates whether this slot is capable of reporting whether
the link is active. This bit is used to control the DLL_LARC field in the Link Capabilities register.
This field is used to control the SDERC field in the Link Capabilities register.
LINK_ACT_RPT_CA
P
rw
0 – Slot is not link active reporting capable
1 – Slot is link active reporting capable
This field is loaded from EEPROM (if present) and reset with PERST.
3
RSVD
rw
2
RSVD
r
This bit is a reserved diagnostic bit that must be set to 0 for proper operation. If an EEPROM is
used, the corresponding bit in the EEPROM must be set to 0.
Reserved. When read, this bit returns zero.
Reference clock disable. This bit is used to disable the REFCK output.
1
REFCK_DIS
rw
0 – REFCK enabled
1 – REFCK disabled
This field is loaded from EEPROM (if present) and reset with PERST.
Receiver presence detect enable. This bit selects whether the PRSNT pin or receiver detect us
used to determine whether the slot is present.
0 – PRSNT pin is used to determine whether slot is present
0
RCVR_PRSNT_EN
rw
1 – Receiver detect is used to determine whether slot is present. It is recommended to only use
this option when PRSNT is not available and the card is removable.
This field is loaded from EEPROM (if present) and reset with PERST. The default value for this
bit is the inverse of the DNn_DPSTRP pin for the associated port.
4.3.62 L0s Idle Timeout Register
This read/write register controls the idle timeout for initiating L0s entry on the Tx path. The value is in units
of 256 ns. The default value is set for just under 7 ＝s. The minimum timeout is 256 ns. This register is
loaded from serial EEPROM and is reset with PERST.
PCI register offset:
ECh
Register type:
Read/Write
Default value:
1Ah
BIT NUMBER
RESET STATE
7
0
6
0
5
0
4
1
3
1
2
0
1
1
0
0
4.3.63 General Slot Info Register
This read/write register contains information that is used in the slot capabilities and control registers for the
downstream port.
120
PCI register offset:
EEh
Register type:
Read/Write; Read Only
Default value:
0000h
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-84. Bit Descriptions – General Slot Info Register
BIT
FIELD NAME
ACCESS
DESCRIPTION
Slot number. This field is used to program the Physical Slot Number field in the Slot Capabilities
register. This field is loaded from EEPROM (if present) and reset with PERST.
15:3
SLOT_NUM
rw
2:0
RSVD
r
Reserved. When read, these bits return zeros.
4.3.64 Advanced Error Reporting Capabilities ID Register
This read-only register identifies the linked list item as the register for PCI Express Advanced Error
Reporting Capabilities. The register returns 0001h when read.
PCI register offset:
100h
Register type:
Read only
Default value:
0001h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
1
4.3.65 Next Capability Offset/Capability Version Register
This read-only register returns the value 0000h to indicate that this extended capability block represents
the end of the linked list of extended capability structures. The least significant four bits identify the
revision of the current capability block as 1h.
PCI register offset:
102h
Register type:
Read only
Default value:
0000h
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
4.3.66 Uncorrectable Error Status Register
This register reports the status of individual errors as they occur. Software may clear these bits only by
writing a 1 to the desired location.
PCI register offset:
104h
Register type:
Read Only, Cleared by a Write of one
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
121
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-85. Uncorrectable Error Status Register
BIT
FIELD NAME
ACCESS
31:21
RSVD
r
DESCRIPTION
20
UR_ERROR
rcuh
Unsupported Request error. This bit is asserted when an Unsupported Request error is
detected (i.e., when a request is received that results in the sending of a completion with an
Unsupported Request status).
19
ECRC_ERROR
rcuh
Extended CRC error. This bit is asserted when an Extended CRC error is detected.
18
MAL_TLP
rcuh
Malformed TLP. This bit is asserted when a malformed TLP is detected.
17
RX_OVERFLOW
rcuh
Receiver Overflow. This bit is asserted when the flow control logic detects that the
transmitting device has illegally exceeded the number of credits that were issued.
16
UNXP_CPL
rcuh
Unexpected Completion. This bit is asserted when a completion packet is received that does
not correspond to an issued request.
15
CPL_ABORT
rcuh
Completer Abort. This bit is asserted when the completion to a pending request arrives with
Completer Abort status.
14
CPL_TIMEOUT
rcuh
Completion Timeout. This bit is asserted when no completion has been received for an
issued request before the timeout period.
13
FC_ERROR
rcuh
Flow Control error. This bit is asserted when a flow control protocol error is detected either
during initialization or during normal operation.
12
PSN_TLP
rcuh
Poisoned TLP. This bit is asserted when an outgoing packet (request or completion) has
been poisoned by setting the poison bit and has inverted the extended CRC attached to the
end of the packet.
11:6
RSVD
r
5
SD_ERROR
rcuh
Surprise Down error. See Surprise Down ECN for a description of this error condition.
4
DLL_ERROR
rcuh
Data Link Protocol error. This bit is asserted if a data link layer protocol error is detected.
3:1
RSVD
r
Reserved. Return zeros when read.
0
Undefined
r
This value read from this bit is undefined.
Reserved. Return zeros when read.
Reserved. Return zeros when read.
4.3.67 Uncorrectable Error Mask Register
The Uncorrectable Error Mask register controls the reporting of individual errors as they occur. When a bit
is set to one, the error status bits are still affected, but the error is not logged and no error reporting
message is sent upstream.
PCI register offset:
108h
Register type:
Read Only, Read/Write
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-86. Uncorrectable Error Mask Register
BIT
FIELD NAME
ACCESS
31:21
RSVD
r
DESCRIPTION
Reserved. Return zeros when read.
Unsupported Request error mask.
20
UR_ERROR_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Extended CRC error mask.
19
ECRC_ERROR_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
122
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 4-86. Uncorrectable Error Mask Register (continued)
BIT
FIELD NAME
ACCESS
18
MAL_TLP_MASK
rwh
DESCRIPTION
Malformed TLP mask.
0 - Error condition is unmasked.
1 - Error condition is masked.
Receiver Overflow mask.
17
RX_OVERFLOW_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Unexpected Completion mask.
16
UNXP_CPL_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Completer Abort mask.
15
CPL_ABORT_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Completion Timeout mask.
14
CPL_TIMEOUT_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Flow Control error mask.
13
FC_ERROR_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Poisoned TLP mask.
12
PSN_TLP_MASK
rwh
11:6
RSVD
r
0 - Error condition is unmasked.
1 - Error condition is masked.
Reserved. Return zeros when read.
Surprise Down error mask.
5
SD_MASK
rwh
0 - Error condition is unmasked.
1 - Error condition is masked.
Data Link Protocol error mask.
4
DLL_ERROR_MASK
rwh
0 - Error condition is unmasked.
3:1
RSVD
r
Reserved. Return zeros when read.
0
Undefined
r
This value read from this bit is undefined.
1 - Error condition is masked.
4.3.68 Uncorrectable Error Severity Register
The Uncorrectable Error Severity register controls the reporting of individual errors as ERR_FATAL or
ERR_NONFATAL. When a bit is set, the corresponding error condition is identified as fatal. When a bit is
clear, the corresponding error condition is identified as nonfatal.
PCI register offset:
10Ch
Register type:
Read Only, Read/Write
Default value:
0003 2030h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
1
17
1
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
1
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
1
4
1
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
123
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-87. Uncorrectable Error Severity Register
BIT
FIELD NAME
ACCESS
31:21
RSVD
r
DESCRIPTION
Reserved. Return zeros when read.
Unsupported Request error severity.
20
UR_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Extended CRC error severity.
19
ECRC_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Malformed TLP severity.
18
MAL_TLP_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Receiver Overflow severity.
17
RX_OVERFLOW_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Unexpected Completion severity.
16
UNXP_CPL_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Completer Abort severity.
15
CPL_ABORT_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Completion Timeout severity.
14
CPL_TIMEOUT_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Flow Control error severity.
13
FC_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Poisoned TLP severity.
12
PSN_TLP_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
11:6
RSVD
r
5
SD_ERROR_SEVR
rwh
Reserved. Return zeros when read.
Surprise Down error severity.
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
Data Link Protocol error severity.
4
DLL_ERROR_SEVR
rwh
0 - Error condition is signaled using ERR_NONFATAL.
1 - Error condition is signaled using ERR_FATAL.
3:1
RSVD
r
Reserved. Return zeros when read.
0
Undefined
r
This value read from this bit is undefined.
4.3.69 Correctable Error Status Register
The Correctable Error Status register reports the status of individual errors as they occur. Software may
clear these bits only by writing a 1 to the desired location.
124
PCI register offset:
110h
Register type:
Read Only, Cleared by a Write of one
Default value:
0000 0000h
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-88. Correctable Error Status Register
BIT
FIELD NAME
ACCESS
31:14
RSVD
r
13
ANFES
rcuh
Advisory nonfatal error status.
12
REPLAY_TMOUT
rcuh
Replay timer timeout. This bit is asserted when the replay timer expires for a pending request
or completion that has not been acknowledged.
11:9
RSVD
r
8
REPLAY_ROLL
rcuh
REPLAY_NUM rollover. This bit is asserted when the replay counter rolls over when a
pending request of completion has not been acknowledged.
7
BAD_DLLP
rcuh
Bad DLLP error. This bit is asserted when an 8b/10n error is detected by the PHY during
reception of a DLLP.
6
BAD_TLP
rcuh
Bad TLP error. This bit is asserted when an 8b/10b error is detected by the PHY during
reception of a TLP.
5:1
RSVD
r
0
RX_ERROR
rcuh
DESCRIPTION
Reserved. Return zeroes when read.
Reserved. Return zeroes when read.
Reserved. Return zeros when read.
Receiver error. This bit is asserted when an 8b/10b error is detected by the PHY at any time.
4.3.70 Correctable Error Mask Register
The Correctable Error Mask register controls the reporting of individual errors as they occur. When a bit is
set to one, error status bits are still affected, but the error is not logged and no error reporting message is
sent upstream.
PCI register offset:
114h
Register type:
Read Only, Read/Write
Default value:
0000 2000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
1
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
Table 4-89. Correctable Error Mask Register
BIT
FIELD NAME
ACCESS
31:14
RSVD
r
13
ANFEM
rwh
12
REPLAY_TMOUT_MASK
rwh
11:9
RSVD
r
DESCRIPTION
Reserved. Return zeros when read.
Advisory nonfatal error mask. This bit is set by default to enable compatibility with
software that does not comprehend role-based error reporting.
Replay timer timeout mask.
0 – Error condition is unmasked
1 – Error condition is masked
Reserved. Return zeros when read.
REPLAY_NUM rollover mask.
8
REPLAY_ROLL_MASK
rwh
0 – Error condition is unmasked
1 – Error condition is masked
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
125
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
Table 4-89. Correctable Error Mask Register (continued)
BIT
FIELD NAME
ACCESS
7
BAD_DLLP_MASK
rwh
DESCRIPTION
Bad DLLP error mask.
0 – Error condition is unmasked
1 – Error condition is masked
Bad TLP error mask.
6
BAD_TLP_MASK
rwh
0 – Error condition is unmasked
1 – Error condition is masked
5:1
RSVD
r
Reserved. Return zeros when read.
0
RX_ERROR_MASK
rwh
Receiver error mask.
0 – Error condition is unmasked
1 – Error condition is masked
4.3.71 Advanced Error Capabilities and Control Register
The Advanced Error Capabilities and Control register allows the system to monitor and control the
advanced error reporting capabilities.
PCI register offset:
118h
Register type:
Read Only, Read/Write
Default value:
0000 00A0h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
1
12
0
11
0
10
0
9
0
8
0
7
1
6
0
5
1
4
0
3
0
2
0
1
0
0
0
Table 4-90. Advanced Error Capabilities and Control Register
BIT
FIELD NAME
ACCESS
31:9
RSVD
r
8
ECRC_CHK_EN
rwh
DESCRIPTION
Reserved. Return zeros when read.
Extended CRC check enable.
0 – Extended CRC checking is disabled
1 – Extended CRC checking is enabled
7
ECRC_CHK_CAPABLE
r
6
ECRC_GEN_EN
rwh
Extended CRC check capable. This read-only bit returns a value of ‘1’ indicating
that the bridge is capable of checking extended CRC information.
Extended CRC generation enable.
0 – Extended CRC generation is disabled
1 – Extended CRC generation is enabled
5
ECRC_GEN_CAPABLE
r
Extended CRC generation capable. This read-only bit returns a value of ‘1’
indicating that the bridge is capable of generating extended CRC information.
4:0
FIRST_ERR
rh
First error pointer. This five-bit value reflects the bit position within the
Uncorrectable Error Status register corresponding to the class of the first error
condition that was detected.
4.3.72 Header Log Register
The Header Log register stores the TLP header for the packet that lead to the most recently detected error
condition. Offset 11Ch contains the first DWORD. Offset 128h contains the last DWORD (in the case of a
4DW TLP header).
PCI register offset:
126
11Ch – 128h
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Register type:
Read only
Default value:
0000 0000h
BIT NUMBER
RESET STATE
31
0
30
0
29
0
28
0
27
0
26
0
25
0
24
0
23
0
22
0
21
0
20
0
19
0
18
0
17
0
16
0
BIT NUMBER
RESET STATE
15
0
14
0
13
0
12
0
11
0
10
0
9
0
8
0
7
0
6
0
5
0
4
0
3
0
2
0
1
0
0
0
XIO3130 Configuration Register Space
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
127
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
5
PCI Hot Plug Implementation Overview
5.1
PCI Hot Plug Architecture Overview
The PCI Express architecture is designed to natively support both hot-add and hot-removal (collectively
Hot-Plug) of adapters. The architecture also provides a ‘toolbox’ of mechanisms that allow different
user/operator models to be supported using a self-consistent infrastructure. PCI Express defines the
registers necessary to support the integration of a PCI Hot Plug controller within individual root and switch
ports. Under PCI Hot-Plug software control, the PCI Hot-Plug controllers and the associated port interface
within the root or switch port must control the card interface signals to ensure orderly power-down and
power-up as cards are removed and replaced.
Table 5-1. GPIO Matrix
GPIO[#]
0
PRSNT1
S
PWRON1
1
2
3
4
5
6
7
6
6
8
9
10
11
6
6
2
MRLSDET1
3
ACTLED1
PWRLED1
6
6
ATNLED1
4
4
ATNBTN1
2
PWRFLT1
4
EMILCTL1
2
4
2
4
2
2
2
15
16
6
PRSNT2
S
PWRON2
5
2
2
5
5
3
3
6
6
5
5
2
4
2
EMILENG1
4
4
7
7
2
6
S
PWRGD2
S
CLKREQ2
2
MRLSDET2
6
6
3
ACTLED2
3
PWRLED2
6
ATNLED2
7
4
5
ATNBTN2
2
2
PWRFLT2
4
4
EMILCTL2
4
3
3
6
6
6
3
3
5
5
2
5
3
6
7
PRSNT3
S
PWRON3
S
PWRGD3
S
CLKREQ3
2
MRLSDET3
7
7
7
7
ACTLED3
3
4
PWRLED3
7
7
ATNLED3
5
5
ATNBTN3
3
3
PWRFLT3
5
5
128
14
S
CLKREQ1
EMILCTL3
13
S
PWRGD1
EMILENG2
12
3
5
3
4
4
7
4
7
4
3
5
5
5
7
7
7
3
PCI Hot Plug Implementation Overview
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Table 5-1. GPIO Matrix (continued)
GPIO[#]
0
EMILENG3
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
7
In Table 2-11, S indicates a strapping option. If the appropriate DNn_DPSTRP pin is pulled high, the GPIO
is mapped to this value and is no longer mapped by the GPIO Control register.
Each downstream port of the XIO3130 is assigned one dedicated sideband pin, DNn_PERST. Three
additional sideband pins may be dedicated to each port for PCI Hot Plug support. The DNn_DPSTRP pins
are set for the corresponding ports to indicate support for PCI Hot Plug. When the DNn_DPSTRP pin
strapping defines a GPIO pin as a PCI Hot Plug support pin, that pin is associated with the Slot Capability,
Slot Status, and Slot Control registers of the corresponding downstream port. These registers are defined
in sections Section 4.3.55, Section 4.3.56, and Section 4.3.57, respectively. When the DPSTRP[2:0] pin
strapping defines a GPIO pin as a GPIO pin, that pin is mapped to a bit field in the GPIO Configuration
registers and Data register. These registers are defined in section Section 4.2.61 through Section 4.2.65.
Table 5-2. PCI Hot Plug Sideband Signals
Signal
I/O
Function
Dn_PERST
O
Port n PE Reset. The PCI Hot Plug card or device is held in a reset state when this signal is low.
PRSNTn
I
PWRONn
O
Port n Power On. Power is applied to the PCI Hot Plug card or device attached to the port when this
signal is low.
PWRGDn
I
Port n Power Good: The power to the PCI Hot Plug card or device is adequate and it is alright to enable
REFCLK to the card or device and de-assert DNn_PERST. When this signal transitions to a low state, the
XIO3130 switch asserts DNn_PERST low and turns off REFCLK.
Port n Present. A PCI Hot Plug card or device is attached to a port when this signal is low.
This signal is reported in the PDC bit of the Slot Status register. When this signal is in a de-asserted high
state, the DNn_PERST pin is asserted low, REFCLK is disabled, and PWRONn is de-asserted high.
Additional GPIO pins may be allocated to PCI Hot Plug support via programming by assigning the pins to
PCI Hot Plug pin functionality in the GPIO Control registers defined in sections Section 4.2.62 through
Section 4.2.65.
Table 5-3. Pins Assigned to GPIO Control Registers
Signal
I/O
Function
CLKREQn
I
Port n CLK REQ. This signal is used to disable the clock during normal operation. If PWRONn is high or
PRSNTn is high or PWRGDn is low, this signal is ignored by the XIO3130.
ACT_LEDn
O
Port n Activity. This pin toggles at anytime activity is detected on the port interface. Otherwise, this pin is
high.
PWR_LEDn
O
Port n Power Indicator: See PI_CTL bit field in Slot Control register (section Section 4.3.56).
ATN_LEDn
O
Port n Attention Indicator: See AI_CTL bit field in Slot Control register (section Section 4.3.56).
ATN_BTNn
I
Port n Attention Push button: See ABP bit field in Slot Status register (section Section 4.3.57).
MRLS_DETn
I
Port n Manually-Operated Retention Latch (MRL): See MRLSS bit field in Slot Status register (section
Section 4.3.57).
EMIL_CTLn
O
Port n Electromechanical Interlock: See EMIL_CTL bit field in Slot Control register (section
Section 4.3.56).
EMIL_ENGn
I
Port n Electromechanical Interlock status: See EMIL_STAT bit field in Slot Status register (section
Section 4.3.57).
PCI Hot Plug Implementation Overview
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
129
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
5.2
www.ti.com
PCI Hot Plug Timing
5.2.1
Power-Up Cycle
The XIO3130 switch can be powered up numerous ways depending on the way the DPSTRP[2:0]
strapping defines the port. The different power-up cycles are: nonPCI Hot Plug power-up cycle, PCI Hot
Plug power-up cycle with PWRGDn feedback, and PCI Hot Plug power-up cycle without PWRGDn
feedback.
5.2.1.1
NonPCI Hot Plug Power-Up Cycle
For nonPCI Hot Plug power-up cycles, there are no PWRONn, PWRGDn, or PRSNTn signals, and the
Slot Control register is not used to power the port up. As soon as the REFCLKn output is stable on the
port, the PERSTn signal is de-asserted high. If no device is detected on the port before Link Training
times out, the PERSTn signal is asserted low and REFCLKn is disabled.
PERST#
PERSTn#
REFCLKn
Unstable
Stable
<100 ms
Figure 5-1. NonPCI Hot Plug Power-Up Cycle
5.2.1.2
PCI Hot Plug Power-Up Cycle With PWRGDn Feedback
For PCI Hot Plug power up cycles with PWRGDn feedback, the PWRONn signal going low gates the
power-up cycle. The XIO3130 switch asserts PWRONn and waits for the PWRGDn signal to transition
high, indicating that power to the slot is now stable. When PWRGDn goes high, REFCLKn is enabled and
a 100 ms time-out starts. After the 100 ms time-out completes, PERSTn is de-asserted. If the port has
been programmed (see GPIO Control Registers in sections Section 4.2.61 through Section 4.2.64) to have
a CLKREQn input when PERSTn de-asserts high, REFCLKn is disabled when CLKREQn is not low.
PWRONn#
PWRGDn
CLKREQn#
REFCLKn
Unstable
Stable
PERSTn#
>100 ms
100 ms
Figure 5-2. PCI Hot Plug Power-Up Cycle With PWFRDn Feedback
5.2.1.3
PCI Hot Plug Power-Up Cycle With No PWRGDn Feedback
This application requires the PWRGDn signal to be tied high. The PWRONn signal going low gates the
130
PCI Hot Plug Implementation Overview
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
power-up cycle. The XIO3130 switch asserts PWRONn and because the PWRGDn signal is tied high, the
power-up cycle starts as soon as PWRONn is asserted. After 100 ms, REFCLKn is enabled, and a 100
ms time-out starts. After the 100 ms time-out completes, PERSTn is de-asserted. If the port has been
programmed (see GPIO Control registers in sections Section 4.2.61 through Section 4.2.64) to have a
CLKREQn input when PERSTn de-asserts high, REFCLKn is disabled when CLKREQn is not low.
PWRONn#
PWRGDn
CLKREQn#
Unstable
REFCLKn
Stable
PERSTn#
100 ms
>100 ms
100 ms
Figure 5-3. PCI Hot Plug Power-Up Cycle With No PWGRDn Feedback
5.2.2
Power-Down Cycles
Various conditions cause the assertion of PERSTn, which also cause REFCLKn to stop a short time later.
5.2.2.1
Normal Power-Down
For PCI Hot Plug ports, other conditions may also power-down the port. Software can power the port
down by de-asserting the PC_CTL bit in the Slot Control register. This invokes a normal power-down
cycle, which is the same power-down cycle invoked by the upstream PERST being asserted.
PWRONn#
PWRGDn
CLKREQn#
REFCLKn
Stable
PERSTn#
< 100 ms
Figure 5-4. Normal Power-Down
5.2.2.2
Surprise Removal
Another PCI Hot Plug Port power-down condition occurs when the PRSNTn pin is de-asserted, indicating
that the card or device has been removed without warning (i.e., surprise removal).
PCI Hot Plug Implementation Overview
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
131
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
PRSNTn#
PWRONn#
CLKREQn#
Stable
REFCLKn
PERSTn#
PWRGDn
<500 ns
<100 ms
Figure 5-5. Surprise Removal
In the case of surprise removal, the XIO3130 switch de-asserts PERST within 500 ns after a de-bounced
PRSNTn de-asserted state exists. Then REFCLKn is disabled, and the PWRONn signal is de-asserted
within 100 ms.
5.2.2.3
PWRGDn De-Assertion
Another situation that forces a PCI Hot Plug port to power-down is the de-assertion of PWRGDn. If
PWRGDn is de-asserted, the XIO3130 switch disables REFCLKn but does not de-assert PWRONn.
PWRGDn
PWRONn#
CLKREQn#
REFCLKn
Stable
Unstable
Stable
PERSTn#
100 ms
<500 ns
>100 ms
Figure 5-6. Effect When PWFRGn Goes Low
Note that once PERSTn goes low, it must remain low for at least 100 ms.
5.2.3
PMI_Turn_Off and PME_To_Ack Messages
For information on the PME_Turn_Off and PME_To_Ack messages, see section Section 3.2.6.
132
PCI Hot Plug Implementation Overview
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
5.2.4
SLLS693F – MAY 2007 – REVISED JANUARY 2010
Debounce Circuits
Integrated de-bounce circuits are provided for the following input pins:
• PRSNT[2:0] present detects for each downstream port; used with PCI Express or ExpressCard
(formerly NEWCARD) slots.
• ATN_BTN[2:0], which are attention button inputs, are MUXed onto GPIO pins; de-bounce is only
needed when the relevant GPIO pins are programmed to this mode.
• MRLS_DET[2:0], which are manual retention latch detection inputs, are MUXed onto GPIO pins;
de-bounce is only needed when the relevant GPIO pins are programmed to this mode.
A timeout of approximately 10 ms is used.
5.2.5
HP_INTX Pin
The HP_INTX output signal is asserted when a PCI Hot Plug interrupt occurs within the switch, but only
asserted due to PCI Hot Plug events. This signal is typically be connected on system boards to an SCI
(System Control Interrupt) input, which invokes an interrupt service routine included in the system BIOS;
other system implementations may connect HP_INTX to a PCI bus interrupt pin.
PCI Hot Plug Implementation Overview
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
133
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
6
www.ti.com
Electrical Characteristics
This chapter describes the electrical characteristics of the XIO3130.
Absolute Maximum Ratings (1)
6.1
over operating free-air temperature range (unless otherwise noted)
VDDRC,
VAUX33REF,
VDD33REF
VDDAREF,
VDDA, VDDD,
VDD15
Input voltage range
VO
Output voltage range
Tstg
(1)
(2)
(3)
UNIT
–0.5 to 3.6
V
–0.5 to 1.65
V
Supply voltage range
PCI Express (PER)
VI
VALUE
–0.6 to 0.6
V
PCI Express REFCKI (differential)
–0.5 to VDD_15
V
Miscellaneous 3.3 – VIO
–0.5 to VDD_33
V
PCI Express (PET)
–0.5 to VDD_15
V
PCI Express REFCKO
–0.5 to VDD_15
V
Miscellaneous 3.3 – VIO
–0.5 to VDD_33
V
Input clamp current, (VI < 0 or VI > VDD) (2)
±20
mA
Output clamp current, (VO < 0 or VO > VDD) (3)
±20
mA
–65 to 150
°C
Storage temperature range
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
Applies to external input. VI < 0 or VI > VDD.
Applies to external output. VO < 0 or VO > VDD.
6.2
Recommended Operating Conditions
OPERATION
MIN
NOM
MAX
UNIT
Supply voltage
1.5 V
1.35
1.5
1.65
V
Supply voltage
3.3 V
3
3.3
3.6
V
XIO3130
0
25
70
XIO3130I
–40
VDDD
VDD15
VDDAREF
VDDA
VDDRC
VDD33
VAUX33REF
VDD33REF
TA
Operating ambient temperature range
TJ
Virtual junction temperature (1)
(1)
134
XIO3130
0
XIO3130I
–40
85
25
105
105
°C
°C
The junction temperature reflects simulated conditions. The customer is responsible for verifying junction temperature.
Electrical Characteristics
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
6.3
SLLS693F – MAY 2007 – REVISED JANUARY 2010
PCI Express Differential Transmitter Output Ranges
PARAMETER
TERMINALS
MIN
NOM
MAX
UNIT
COMMENTS
UI
Unit interval
PETP,
PETN
399.88
400 400.12
ps
Each UI is 400 ps ±300 ppm. UI does not account
for SSC dictated variations.See (1)
VTX-DIFFp-p
Differential peak-to-peak output
voltage
PETP,
PETN
0.8
1.2
V
VTX-DIFFp-p = 2*|VTXP – VTXN|.
See (2)
VTX-DE-RATIO
De-emphasized differential output
voltage (ratio)
PETP,
PETN
–3
–4.0
dB
This value is the ratio of the VTX-DIFFp-p of the
second and following bits after a transition divided
by the VTX-DIFFp-p of the first bit after a transition.
See (2)
TTX-EYE
Minimum TX eye width
PETP,
PETN
0.75
UI
The maximum transmitter jitter can be derived as
TTXMAX- JITTER = 1 – TTX-EYE = 0.25 UI.
See (2) (3)
UI
Jitter is defined as the measurement variation of
the crossing points (VTX-DIFFp-p = 0 V) in relation to
recovered TX UI. A recovered TX UI is calculated
over 3500 consecutive UIs of sample data. Jitter is
measured using all edges of the 250 consecutive
UIs in the center of the 3500 UIs that are used for
calculating the TX UI. See (2) (3)
UI
See
mV
VTX-CM-ACp = RMS(|VTXP + VTXN|/2 – VTX-CM-DC)
VTX-CM-DC = DC(avg) of |VTXP + VTXN|/2
See (2)
TTX-EYE-MEDIAN-to-MAX-JITTER
Maximum time between the jitter
median and maximum deviation
from the median
PETP,
PETN
TTX-RISE,
TTX-FALL
Differential TX output rise/fall time
PETP,
PETN
VTX-CM-ACp
RMS ac peak common mode output
voltage
PETP,
PETN
–3.5
0.125
0.125
20
(2) (4)
VTX-CM-DC-ACTIVE-IDLE-DELTA
Absolute delta of DC common mode
voltage during L0 and electrical idle.
PETP,
PETN
0
100
mV
|VTX-CM-DC – VTX-CM-IDLE-DC| ≤ 100 mV
VTX-CM-DC = DC(avg) of |VTXP + VTXN|/2 [during L0]
VTX-CM-IDLE-DC = DC(avg) of |VTXP + VTXN|/2 [during
electrical idle]
See (2)
VTX-CM-DC-LINE-DELTA
Absolute delta of DC common mode
voltage between P and N
PETP,
PETN
0
25
mV
|VTXP-CM-DC – VTXN-CM-DC| ≤ 25 mV when
VTXP-CM-DC = DC(avg) of |VTXP|
VTXN-CM-DC = DC(avg) of |VTXN|
See (2)
VTX-IDLE-DIFFp
Electrical idle differential peak output
voltage
PETP,
PETN
0
20
mV
VTX-IDLE-DIFFp = |VTXP-IDLE – VTXN-IDLE| ≤ 20 mV
See (2)
VTX-RCV-DETECT
The amount of voltage change
allowed during receiver detection
PETP,
PETN
600
mV
The total amount of voltage change that a
transmitter can apply to sense whether a low
impedance receiver is present.
VTX-DC-CM
The TX DC common mode voltage
PETP,
PETN
3.6
V
ITX-SHORT
TX short circuit current limit
PETP,
PETN
90
mA
The total current that the transmitter can provide
when shorted to its ground.
TTX-IDLE-MIN
Minimum time spent in electrical idle
PETP,
PETN
UI
Minimum time that a transmitter must be in
electrical Idle. The receiver uses this value to start
looking for an electrical idle exit after successfully
receiving an electrical idle ordered set.
UI
After sending an electrical idle ordered set, the
transmitter must meet all electrical idle
specifications within this time. This is considered a
de-bounce time for the transmitter to meet
electrical idle after transitioning from L0.
TTX-IDLE-SET-to-IDLE
Maximum time to transition to a valid
electrical idle after sending an
electrical idle ordered set
(1)
(2)
(3)
(4)
PETP,
PETN
0
50
20
The allowed DC common mode voltage under any
condition
No test load is necessarily associated with this value.
Specified at the measurement point into a timing and voltage compliance test load and measured over any 250 consecutive TX UIs.
A TTX-EYE = 0.75 UI provides for a total sum of deterministic and random jitter budget of TTX-JITTER-MAX = 0.25 UI for the transmitter
collected over any 250 consecutive TX UIs. The TTX-EYE-MEDIAN-to-MAX-JITTER specification ensures a jitter distribution in which the median
and the maximum deviation from the median is less than half of the total TX jitter budget collected over any 250 consecutive TX UIs. It
must be noted that the median is not the same as the mean. The jitter median describes the point in time where the number of jitter
points on either side is approximately equal as opposed to the averaged time value.
Measured between 20% and 80% at transmitter package terminals into a test load for both VTX-D+ and VTX-D–.
Electrical Characteristics
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
135
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
www.ti.com
PCI Express Differential Transmitter Output Ranges (continued)
PARAMETER
TERMINALS
MIN
NOM
MAX
UNIT
COMMENTS
UI
Maximum time to meet all TX specifications when
transitioning from electrical idle to sending
differential data. This value is considered a
de-bounce time for the TX to meet all TX
specifications after leaving electrical idle.
10
dB
Measured over 50 MHz to 1.25 GHz.
See (5)
PETP,
PETN
6
dB
Measured over 50 MHz to 1.25 GHz.
See (5)
ZTX-DIFF-DC
DC differential TX impedance
PETP,
PETN
80
Ω
TX DC differential mode low impedance
ZTX-DC
Transmitter DC impedance
PETP,
PETN
40
Ω
Required TX-D+ as well as TX-D– DC impedance
during all states
CTX
AC coupling capacitor
PETP,
PETN
75
nF
All transmitters are AC-coupled and capacitors are
required on the PWB.
TTX-IDLE-to-DIFF-DATA
Maximum time to transition to valid
TX specifications after leaving an
electrical idle condition
PETP,
PETN
RLTX-DIFF
Differential return loss
PETP,
PETN
RLTX-CM
Common mode return loss
(5)
6.4
TRX-EYE
Minimum receiver eye width
TERMINALS
PERP,
PERN
PERP, PERN
TRX-EYE-MEDIAN-to-MAX-JITTER
Maximum time between the jitter
median and maximum deviation
from the median.
PERP,
PERN
VRX-CM-ACp
AC peak common mode input
voltage
PERP,
PERN
(3)
136
120
200
PCI Express Differential Receiver Input Ranges
PARAMETER
(2)
100
The transmitter input impedance results in a differential return loss greater than or equal to 12 dB and a common mode return loss
greater than or equal to 6 dB over a frequency range of 50 MHz to 1.25 GHz. This input impedance requirement applies to all valid input
levels. The reference impedance for return loss measurements is 50 Ω to ground for both the P and N lines. Note that the series
capacitors CTX is optional for the return loss measurement.
VRX-DIFFp-p
Differential input peak-to-peak
voltage
(1)
20
MIN
0.175
NOM
MAX
1.2
0.4
0.3
150
UNIT
COMMENTS
V
VRX-DIFFp-p = 2*|VRX-D+ – VRX-D–|
See (1)
UI
The maximum interconnect media and transmitter
jitter that can be tolerated by the Receiver is
derived as TRX-MAX- JITTER = 1 - TRX-EYE = .6 UI
See (1) (2) (3)
UI
Jitter is defined as the measurement variation of
the crossing points (VRX-DIFFp-p = 0 V) in relation to
recovered TX UI. A recovered TX UI is calculated
over 3500 consecutive unit intervals of sample
data. Jitter is measured using all edges of the 250
consecutive UI in the center of the 3500 UI used
for calculating the TX UI.
See (1) (2)
mV
VRX-CM-ACp = RMS( |VRX-D+ + VRX-D–| / 2 –
VRX-CM-DC)
VRX-CM-DC = DC(avg) of |VRX-D+ + VRX-D-| / 2
See (1)
Specified at the measurement point and measured using the clock recovery function specified in PCI Express™ Base Specification
Revision 1.1, Section 4.3.3.2. The test load in Figure 4-25 should be used as the RX device when taking measurements (also refer to
the Receiver compliance eye diagram shown in Figure 4-26 of the specification). If the clocks to the RX and TX are not derived from the
same reference clock, the TX UI recovered using the clock recovery function specified in Section 4.3.3.2 must be used as a reference
for the eye diagram.
The TRX-EYE-MEDIAN-to-MAX-JITTER specification ensures a jitter distribution in which the median and the maximum deviation from the
median is less than half of the total 0.64. It should be noted that the median is not the same as the mean. The jitter median describes
the point in time where the number of jitter points on either side is approximately equal as opposed to the averaged time value. The RX
UI recovered using the clock recovery function specified in Section 4.3.3.2 must be used as the reference for the eye diagram. This
parameter is measured with the equivalent of a zero jitter reference clock. The TRX-EYE measurement is to be met at the target bit error
rate. The TRX-EYE-MEDIAN-to-MAX-JITTER specification is to be met using the compliance pattern at a sample size of 1,000,000 UI.
See the PCI Express Jitter and BER white paper for more details on the Rx-Eye measurement.
Electrical Characteristics
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
PCI Express Differential Receiver Input Ranges (continued)
PARAMETER
TERMINALS
MIN
NOM
MAX
UNIT
COMMENTS
RLRX-DIFF
Differential return loss
PERP,
PERN
10
dB
Measured over 50 MHz to 1.25 GHz with the P
and N lines biased at +300 mV and –300 mV,
respectively.
See (4)
RLRX-CM
Common mode return loss
PERP,
PERN
6
dB
Measured over 50 MHz to 1.25 GHz with the P
and N lines biased at +300 mV and –300 mV,
respectively.
See (4).
ZRX-DIFF-DC
DC differential input impedance
PERP,
PERN
80
100
120
Ω
RX DC differential mode impedance.
See (5).
ZRX-DC
DC input impedance
PERP,
PERN
40
50
60
Ω
Required RX-D+ as well as RX-D– DC impedance
(50 Ω ±20% tolerance).
See (1) and (5).
ZRX-HIGH-IMP-DC
Powered-down DC input impedance
PERP,
PERN
200K
Ω
Required RX-D+ as well as RX-D– DC impedance
when the receiver terminations do not have power.
See (6).
VRX-IDLE-DET-DIFFp-p
Electrical idle detect threshold
PERP,
PERN
65
TRX-IDLE-DET-DIFF-ENTER-TIME
Unexpected electrical idle enter
detect threshold integration time
PERP,
PERN
(4)
(5)
(6)
6.5
10
mV
VRX-IDLE-DET-DIFFp-p = 2 * |VRX-D+ – VRX-D–|
measured at the receiver package pins
ms
An unexpected electrical idle (VRX-DIFFp-p <
VRX-IDLE-DET-DIFFp-p) must be recognized no longer
than
TRX-IDLE-DET-DIFF-ENTER-TIME to signal an
unexpected idle condition.
The Receiver input impedance shall result in a differential return loss greater than or equal to 10 dB with a differential test input signal of
no less than 200 mV (peak value, 400 mV differential peak to peak) swing around ground applied to D+ and D– lines and a common
mode return loss greater than or equal to 6 dB (no bias required) over a frequency range of 50 MHz to 1.25 GHz. This input impedance
requirement applies to all valid input levels. The reference impedance for return loss measurements for is 50 Ω to ground for both the
D+ and D– line (i.e., as measured by a Vector Network Analyzer with 50 Ω probes; see Figure 4-25 in the specification). Note that the
series capacitors CTX is optional for the return loss measurement.
Impedance during all LTSSM states. When transitioning from a Fundamental Reset to Detect (the initial state of the LTSSM) there is a 5
ms transition time before receiver termination values must be met on all unconfigured lanes of a port.
The RX DC common mode impedance that exists when no power is present or Fundamental Reset is asserted. This helps ensure that
the Receiver Detect circuit does not falsely assume a receiver is powered on when it is not. This term must be measured at 200 mV
above the RX ground.
PCI Express Differential Reference Clock Input Ranges (1)
PARAMETER
TERMINALS
fIN-DIFF
Differential input frequency
REFCKIp
REFCKIn
VRX-DIFFp-p
Differential input peak-to-peak
voltage
REFCKIp
REFCKIn
VRX-CM-ACp
AC peak common mode input
voltage
REFCKIp
REFCKIn
Duty cycle
REFCKIp
REFCKIn
ZRX-DIFF-DC
DC differential input impedance
REFCKIp
REFCKIn
(1)
175
MIN
NOM
MAX
100
0.175
40%
UNIT
MHz
1.2
V
140
mV
60%
20
COMMENTS
The input frequency is 100 MHz +300 ppm and
–2800＝ppm including SSC-dictated variations.
VRX-DIFFp-p = 2*|VREFCKp – VREFCKn|
VRX-CM-ACp = RMS(|VREFCKp + VREFCKn|/2 –
VRX-CM-DC)
VRX-CM-DC = DC(avg) of |VREFCKp + VREFCKn|/2
Differential waveform input duty cycle
kΩ
REFCKIp/ REFCKIn DC differential mode
impedance
The XIO3130 is compliant with the defined system jitter models for a PCI Express reference clock and associated TX/RX link. These
system jitter models are described in the PCI Express Jitter Modeling, Revision 1.0RD document. Any usage of the XIO3130 in a
system configuration that does not conform to the defined system jitter models requires the system designer to validate the system jitter
budgets.
Electrical Characteristics
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
137
XIO3130
SLLS693F – MAY 2007 – REVISED JANUARY 2010
6.6
www.ti.com
PCI Express Reference Clock Output Requirements
SYMBOL
100-MHz INPUT
PARAMETER
MIN
MAX
UNIT
NOTES
Rise Edge Rate
Rising edge rate
0.6
4
V/ns
See
(1)
and
(2)
Fall Edge Rate
Falling edge rate
0.6
4
V/ns
See
(1)
and
(2)
VIH
Differential input high voltage
150
mV
See
(1)
VIL
Differential input low voltage
–150
mV
See
(1)
VCROSS
Absolute crossing point voltage
550
mV
See Notes
(3) (4)
, and
(5)
140
mV
See Notes
(3) (4)
, and
(6)
RCROSS
DELTA
250
Variation of VCROSS over all rising
clock edges
VRB
Ring-back voltage margin
TSTABLE
Time before VRB is allowed
TPERIOD AVG
Average clock period accuracy
TPERIOD ABS
Absolute period (including jitter and
spread spectrum)
TCCJITTER
VMAX
138
and
(7)
See Notes
(1) (8)
,
, and
Absolute maximum input voltage
1.15
V
See
(3)
and
(11)
.
and
(12)
.
40
40
.
.
(1)
9.847
.
.
See
Clock source DC impedance
(14)
ppm
and
ps
ZC-DC
(11)
(12)
(13)
(1)
150
Rising edge rate (REFCKOp) to
falling edge rate (REFCKOn)
matching
(10)
See
(7)
Cycle-to-cycle jitter
Rise-Fall
Matching
(8)
(9)
See
ps
,
See
Duty cycle
(7)
2800
mV
(1)
,
ns
Duty Cycle
(6)
–300
.
10.203
Absolute minimum input voltage
(3)
(4)
(5)
100
500
.
(1)
VMIN
(1)
(2)
–100
.
.
and
(10)
.
(9)
.
.
–0.3
V
See
(3)
60
%
See
(1)
20
%
See
(3)
and
(13)
.
60
Ω
See
(3)
and
(14)
.
.
Measurement taken from differential waveform.
Measured from –150 mV to +150 mV on the differential waveform (derived from REFCKOp minus REFCKOn). The signal must be
monotonic through the measurement region for rise and fall time. The 300 mV measurement window is centered on the differential zero
crossing.
Measurement taken from single-ended waveform.
Measured at crossing point where the instantaneous voltage value of the rising edge of REFCKOp equals the falling edge of REFCKOn.
Refers to the total variation from the lowest crossing point to the highest, regardless of which edge is crossing. Refers to all crossing
points for this measurement.
Defined as the total variation of all crossing voltages of rising REFCKOp and falling REFCKOn. This is the maximum allowed variance in
VCROSS for any particular system.
TSTABLE is the time the differential clock must maintain a minimum ±150 mV differential voltage after rising/falling edges before it is
allowed to droop back into the VRB ±100 mV differential range.
Refer to Section 4.3.2.1 of the PCI Express Base Specification, Revision 1.1 for information regarding PPM considerations.
PPM refers to parts per million and is a DC absolute period accuracy specification. 1 PPM is 1/1,000,000th of 100.000000 MHz exactly
or 100 Hz. For 300 PPM then we have a error budget of 100 Hz/PPM * 300 PPM = 30 kHz. The period is to be measured with a
frequency counter with measurement window set to 100 ms or greater. The ±300 PPM applies to systems that do not employ Spread
Spectrum or that use common clock source. For systems employing Spread Spectrum there is an additional 2500 PPM nominal shift in
maximum period resulting from the 0.5% down spread resulting in a maximum average period specification of +2800 PPM.
Defines as the absolute minimum or maximum instantaneous period. This includes cycle to cycle jitter, relative PPM tolerance, and
spread spectrum modulation.
Defined as the maximum instantaneous voltage including overshoot.
Defined as the minimum instantaneous voltage including undershoot.
Matching applies to rising edge rate for REFCKOp and falling edge rate for REFCKOn. It is measured using a ±75 mV window centered
on the median cross point where REFCKOp rising meets REFCKOn falling. The median cross point is used to calculate the voltage
thresholds the oscilloscope is to use for the edge rate calculations. The Rise Edge Rate of REFCKOp should be compared to the Fall
Edge Rate of REFCKOn, the maximum allowed difference should not exceed 20% of the slowest edge rate.
System board compliance measurements must use the recommended test load card. REFCKOp and REFCKOn are to be measured at
the load capacitors CL. Single ended probes must be used for measurements requiring single ended measurements. Either single
ended probes with math or differential probe can be used for differential measurements. Test load CL = 2 pF.
Electrical Characteristics
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
XIO3130
www.ti.com
SLLS693F – MAY 2007 – REVISED JANUARY 2010
3.3-V I/O Electrical Characteristics (1)
6.7
PARAMETER
OPERATIONS
(2)
VIH
High-level input voltage
VIL
Low-level input voltage (2)
VI
Input voltage
TEST CONDITIONS
0.7 VDD33
VDD33
V
0
0.3 VDD33
V
0
VDD33
V
0
VDD33
V
0
25
ns
0.13 VDD33
V
Output voltage
tp
Input transition time (trise and tfall)
Vhys
Input hysteresis (4)
VOH
High-level output voltage
VDD33
IOH = –4 mA
VOL
Low-level output voltage
VDD33
IOL = 4 mA
IOZ
High-impedance, output current
VDD33
IOZP
High-impedance, output current with internal
pullup or pulldown resistor (5)
(1)
(2)
(3)
(4)
(5)
(6)
Input current
(6)
UNIT
VDD33
(3)
(3)
MAX
VDD33
VO
II
MIN
0.8 VDD33
V
0.22 VDD33
V
VI = 0 to VDD33
±20
mA
VDD33
VI = 0 to VDD33
±175
mA
VDD33
VI = 0 to VDD33
±1
mA
This table applies to PERST, WAKE, REFCLK_SEL, GRST, and GPIO18:0.
Applies to external inputs and bidirectional buffers.
Applies to external outputs and bidirectional buffers.
Applies to PERST and GRST.
Applies to GRST (pullup resistor) and most GPIO (pullup resistor).
Applies to external input buffers.
POWER CONSUMPTION (1)
6.8
NOM (2)
MAX (3)
I3.3V
11.21
20.61
I1.5V
578.7
725.8
mA
P3.3V
36.99
68.01
mW
P1.5V
868.05
1088.7
mW
PARAMETER
IAUX
(1)
(2)
(3)
(4)
6.9
MIN
(4)
mA
5.28
mA
Measurements taken at 25°C with nominal power supply, 3.3 V and 1.5 V.
Nominal conditions are defined as switch only power, no devices downstream, and downstream clocks not running.
Maximum power conditions are defined as three downstream devices constantly running traffic and downstream clocks running.
Measurement performed with three devices downstream, system in S5.
THERMAL CHARACTERISTICS
TEST CONDITIONS (1)
PARAMETER
TYP
Low K JEDEC test board, 1s (single-signal layer), no air flow
qJA
UNIT
Junction-to-free-air thermal resistance
High K JEDEC test board, 2s2p
(double-signal layer, double buried power plane)
UNIT
51.2
No air flow
30.5
400 LFM
17.7
200 LFM
14.7
°C/W
qJC
Junction-to-case thermal resistance
Cu cold plate measurement process
7
°C/W
qJB
Junction-to-board thermal resistance
EIA/JESD 51-8
13.9
°C/W
ΨJT
Junction-to-top of package
EIA/JESD 51-2
0.5
°C/W
Junction-to-board
EIA/JESD 51-6
12
°C/W
ΨJB
(1)
For more details, refer to TI application report IC Package Thermal Metrics (literature number SPRA953).
Electrical Characteristics
Copyright © 2007–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): XIO3130
139
PACKAGE OPTION ADDENDUM
www.ti.com
18-Jan-2010
PACKAGING INFORMATION
Orderable Device
Status (1)
XIO3130IZHC
ACTIVE
BGA MI
CROSTA
R
ZHC
196
126
Green (RoHS &
no Sb/Br)
SNAGCU
Level-3-260C-168 HR
XIO3130ZHC
ACTIVE
BGA MI
CROSTA
R
ZHC
196
126
Green (RoHS &
no Sb/Br)
SNAGCU
Level-3-260C-168 HR
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated