HITTITE HMC365G8

HMC365G8
v00.1002
MICROWAVE CORPORATION
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13.0 GHz
10
Typical Applications
Features
Prescaler for DC to Ku Band PLL Applications:
Ultra Low SSB Phase Noise: -151 dBc/Hz
• Point-to-Point / Multi-Point Radios
Wide Bandwidth
• VSAT Radios
Output Power: 7 dBm
• Fiber Optic
Single DC Supply: +5V
• Test Equipment
8 Lead Hermetic SMT Package
FREQ. DIVIDER & DETECTORS - SMT
• Space & Military
Functional Diagram
General Description
The HMC365G8 is a low noise Divide-by-4 Static
Divider with InGaP GaAs HBT technology in an
8 lead glass/metal (hermetic) surface mount
hermetic package. This device operates from DC
(with a square wave input) to 13.0 GHz input frequency with a single +5.0V DC supply. The low
additive SSB phase noise of -151 dBc/Hz at 100
kHz offset helps the user maintain good system
noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc = 5V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Output Power
Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time
Min.
Typ.
13
14
Sine Wave Input. [1]
Max.
GHz
0.2
0.5
GHz
Fin = 1 to 11 GHz
-15
>-20
+10
dBm
Fin = 11 to 12 GHz
-10
>-15
+5
dBm
Fin = 12 to 13 GHz
-5
>-8
0
dBm
Fin = 13 GHz
3
7
dBm
Both RF Outputs Terminated
45
dB
Pin = 0 dBm, Fin = 6 GHz
-151
dBc/Hz
Pin = 0 dBm, Fout = 882 MHz
100
ps
120
mA
Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal.
10 - 44
Units
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC365G8
v00.1002
MICROWAVE CORPORATION
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13.0 GHz
MMIC
SUB-HARMONICALLY
PUMPED
MIXER
- 25 GHz
InputGaAs
Sensitivity
Window,
T= 25 °C
Input
Sensitivity
Window17
vs. Temperature
20
20
10
0
-10
-20
0
-30
0
1
2
3
4
5 6 7 8 9 10 11 12 13 14 15 16 17
INPUT FREQUENCY (GHz)
Output Power vs. Temperature
0
0
9
-20
SSB PHASE NOISE (dBc/Hz)
10
8
7
6
5
+ 25C
+ 85C
- 40C
4
3
2
1
2
3
4
5 6 7 8 9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
2
3
4
5 6 7 8 9 10 11 12 13 14 15 16 17
INPUT FREQUENCY (GHz)
-40
-60
-80
-100
-120
-140
-160
2
10
0
0
1
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
1
10
3
10
4
10
5
10
6
10
7
OFFSET FREQUENCY (Hz)
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
0
Both Output Ports Terminated
One Output Port Terminated
-10
-10
POWER LEVEL (dBm)
OUTPUT LEVEL (dBm)
10
-10
-20
-30
OUTPUT POWER (dBm)
Min Pin + 25c
Max Pin + 25C
Min Pin + 85C
Max Pin + 85C
Min Pin -40C
Max Pin -40C
-20
-30
Pfeedthru
2nd Harmonic
3rd Harmonic
-40
FREQ. DIVIDERS & DETECTORS - SMT
Recommended
Operating Window
INPUT POWER (dBm)
INPUT POWER (dBm)
10
-20
-30
-40
-50
-60
-70
-50
0
1
2
3
4
5 6 7 8 9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
0
1
2
3
4
5 6 7 8 9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10 - 45
MICROWAVE CORPORATION
HMC365G8
v00.1002
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13.0 GHz
FREQ. DIVIDER & DETECTORS - SMT
10
AMPLITUDE (mV)
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
700
600
500
400
300
200
100
0
-100
-200
-300
-400
-500
-600
-700
22.7 22.9 23.1 23.3 23.5 23.7 23.9 24.1 24.3 24.5 24.7
Absolute Maximum Ratings
RF Input (Vcc = +5V)
+13 dBm
Vcc
+5.5V
Channel Temperature (Tc)
135 °C
Continuous Pdiss (T = 85 °C)
(derate 12.4 mW/° C above 85 °C)
621 mW
Storage Temperature
-65 to -150 °C
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vcc
TIME (nS)
Vcc (V)
Icc (mA)
4.75
110
5.0
120
5.25
130
Note: Divider will operate over full voltage range shown above
Outline Drawing
NOTES:
1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS.
2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING).
3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 50 MICROINCHES MIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
10 - 46
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
MICROWAVE CORPORATION
HMC365G8
v01.0701
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13.0 GHz
Pin Description
Function
Description
1
IN
RF Input must be DC blocked.
2, 6
N/C
No connection.
3
IN
RF Input 180° out of phase with pin 1 for differential operation.
AC ground for single ended operation.
4
GND
Ground: Backside of package has exposed metal ground which must
be connected to a RF/DC ground.
5
OUT
Divided output 180° out of phase with pin 7.
7
OUT
Divided Output.
8
VCC
Supply voltage 5V ± 0.25V.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10
FREQ. DIVIDERS & DETECTORS - SMT
Pin Number
10 - 47
v00.1002
MICROWAVE CORPORATION
HMC365G8
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13.0 GHz
Evaluation PCB
FREQ. DIVIDER & DETECTORS - SMT
10
List of Materials
Item
Description
J1 - J3
PC Mount SMA RF Connector
C1 - C4
100 pF Capacitor, 0402 Pkg,
C5
1000 pF Capacitor, 0603 Pkg.
C6
10 µF Tantalum Capacitor
U1
HMC365G8 Divide-by-4
PCB*
104627 Eval Board
* Circuit Board Material: Rogers 4350
10 - 48
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
and backside ground slug should be connected directly
to the ground plane similar to that shown. A sufficient
number of via holes should be used to connect the top
and bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2
and J3 provide differential output signals.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
v00.1002
MICROWAVE CORPORATION
HMC365G8
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13.0 GHz
Application Circuit
FREQ. DIVIDERS & DETECTORS - SMT
10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10 - 49