A-BRIGHT A-BRIGHT INDUSTRIAL CO.,LTD. SURFACE MOUNT LED LAMPS 0603 YELLOW GREEN SMD Chip LED Lamps Part Number: AL-HG036A Package outlines & Re-flow Profile Reflow Temp/Time DIE 1.6 0.3 RESIN 1.0 PCB Soldering iron Basic spec is U 5sec when 260℃. If temperature is higher, time should be shorter (+10℃Æ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . 0.6 0.3 1.6 0.3 0.8 RECOMMEND PAD LAYOUT ITEM MATERIALS Resin (mold) Epoxy Lens color Water Clear Printed circuit board BT Dice GaP/GaP Emitted color Yellow/Green NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. A-BRIGHT A-BRIGHT INDUSTRIAL CO.,LTD. SURFACE MOUNT LED LAMPS Part Number: AL-HG036A ELECTRO-OPTICAL CHARACTERISTICS Test Condition Symbol Parameter Viewing angle at 50% Iv If=10mA (Typ.) Forward voltage (Max.) X (Typ.) CIE Coordinates Y (Typ.) Luminous intensity WAVELENGTH (TA=25℃) (Typ.) λp(nm) λd(nm) Value Unit 120 Deg θ If=20mA Vf If=20mA -- If=20mA Iv 2.30 2.70 -- If=20mA Absolute maximum ratings Parameter V 15 mcd 568 570 nm (TA=25℃) Symbol Value Unit Forward current If 30 mA Reverse voltage Vr 5 V Operating temperature range Top -20 ~+80 ℃ Storage temperature range Tstg -20 ~+100 ℃ Peak pulsing current (1/8 duty f=1kHz) Ifp 100 mA A-BRIGHT A-BRIGHT INDUSTRIAL CO.,LTD. SURFACE MOUNT LED LAMPS Part Number: AL-HG036A Test items and results of reliability Operation Sequence Environmental Sequence Type Test Item REF. Standard Test Conditions Note Number of Damaged Temperature Cycle JIS C 7021 (1977)A-4 -20℃ ⇒ 25℃ ⇒ 80℃ ⇒ 25℃ 30mins, 5mins, 30mins, 5mins 50 cycle 0/100 Thermal Shock MIL-STD107D -20℃ ⇒ 80℃ 15mins, 15mins 50 cycle 0/100 High Humidity Heat Cycle JIS C 7021 (1977)A-5 30℃ ⇒ 65℃ 90%RH 24hrs/1cycle 10 cycle 0/100 High Temperature Storage JIS C 7021 (1977)B-10 Ta=80℃ 1000 hrs 0/100 Humidity Heat Storage JIS C 7021 (1977)B-11 Ta=60℃ RH=90% 1000 hrs 0/100 Low Temperature Storage JIS C 7021 (1977)B-12 Ta=－30℃ 1000 hrs 0/100 Life Test JIS C 7035 (1985) Ta=25℃ IF=20mA 1000 hrs 0/100 High Humidity Heat Life Test ＊ 60℃ RH=90% IF=20mA 1000 hrs 0/100 Low Temperature Life Test ＊ Ta=-20℃ IF=20mA 1000 hrs 0/100 ＊Refer to reliability test standard specification for in this line. A-BRIGHT A-BRIGHT INDUSTRIAL CO.,LTD. TYPICAL ELECTRICAL-OPTICAL CHARACTERISTICS CURVES (A) 1.0 (B) (2) (3) (8) (C) (D) (1)(6) (5) 650 700 (9) (10) 0.5 0 350 400 450 500 550 600 750 800 850 900 950 Wavelength(nm) RELATIVE INTENSITY VS. WAVELENGTH(λd) (1) wGaAsP/GaAs 655nm/Red (2) wGaP 568nm/ Yellow Green (3) wGaAsP/GaP 585nm/Yellow (4) wGaAsP/GaP 635nm/Orange & Hi-Eff Red (5) wGaP 700nm/Bright Red (6) wGaAlAs/GaAs 660nm/Super Red (8)wGaAsP/GaP 610nm/Super Red (9)- GaAlAs 880nm (10)-GaAs/GaAs&GaAlAs/GaAs 940nm (A)- GaN 430nm/Blue (B)- InGaN 470nm/Blue (C)- InGaN 502nm/Ultra Green (D)- InGaAl 523nm/Ultra Green 1000 A-BRIGHT A-BRIGHT INDUSTRIAL CO.,LTD. CHARACTERISTICS DIAGRAMS FORWARD CURRENT(mA) 40 B 30 D 20 10 1 3.0 2.0 1.6 2.0 2.4 5 B D 1.0 0 1.2 FORWARD CURRENT 2,3,4,6,8 4.0 RELATIVE LUMINOUS INTENSITY 50 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT VS. FORWARD VOLTAGE 8 1 645 2 3 0 2.6 3.0 3.5 4.0 20 40 60 80 100 FORWARD CURRENT(mA) FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. AMBIENT TEMPERATURE 50 1 RELATIVE LUMINOUS INTENSITY FORWARD CURRENT(mA) 40 6 30 20 2,4,8,A 3 5 10 0 20 40 60 AMBIENT TEMPERATURE Ta(℃) 80 100 3 5 4 1 23 2 1 0.5 5 0.2 0.1 20 40 60 80 AMBIENT TEMPERATURE Ta(℃) 100