AQY221N1S CSA pending RF (Radio Frequency) C × R 20 Type (by) 4.3±0.2 .169±.008 4.4±0.2 .173±.008 2.1±0.2 .083±.008 mm inch PhotoMOS RELAYS FEATURES TYPICAL APPLICATIONS 1. Low output capacitance between output terminals and low ON-resistance Output capacitance(C): 2.0pF (typ.) ON resistance(R): 9.8Ω (typ.) 2. High speed switching Turn on time: 40ms Turn off time: 60ms 3. SO package 4-pin type in super miniature design Size: (W)4.3 × (L)4.4 × (H)2.1 mm (W).169 × (L).173 × (H).083 inch 4. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes, where as this PhotoMOS relay has only 10pA (typical) even with the rated load voltage 5. Controls low-level analog signals 6. Low thermal electromotive force (Approx. 1 mV) Measuring and testing equipment 1. Testing equipment for semiconductor performance IC tester, Liquid crystal driver tester, semiconductor performance tester 2. Board tester Bear board tester, In-circuit tester, function tester 3. Medical equipment Ultrasonic wave diagnostic machine 4. Multi-point recorder (warping, thermo couple) TYPES Type AC/DC type Output rating* Tape and reel packing style Load voltage Load current Picked from the 1/2-pin side Picked from the 3/4-pin side 40V 120mA AQY221N1SX AQY221N1SZ Packing quantity Tube Tape and reel 1,000 pcs 1,000 pcs * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the initial letters of the product number "AQY and S", the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage 548 Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY221N1S 50mA 3V 1A 75mW 40V 0.12A 0.30A 300mW 350mW 1,500V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f=100 Hz, Duty factor=0.1% Peak AC,DC 100 ms (1 shot), VL= DC Non-condensing at low temperatures AQY221N1S 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol LED operate current Input LED turn off current LED dropout voltage Typical AQY221N1S IFon Maximum Minimum Typical Typical Maximum IFoff VF Ron Typical Transfer characteristics 2.5pF IF=5mA IL=100 mA Within 1 s on time IF=0 VB=0 V f=1 MHz 0.01nA 10nA IF=0 VL=Max. 0.04ms IF=5mA VL=10V RL=100Ω Cout Maximum Switching speed IF=5mA 2.0pF Output capacitance # Off state leakage current IL=100 mA 12.5Ω Maximum Output IL=100 mA 9.8Ω Typical On resistance # Condition 0.9mA 3.0mA 0.4mA 0.85mA 1.14 (1.25 V at IF=50mA) 1.5V Typical Maximum Turn on time* Typical Turn off time* Typical ILeak Ton Maximum 0.5ms 0.2ms IF=5mA VL=10V RL=100Ω 0.06ms Toff Maximum Typical Maximum Ciso 0.8pF 1.5pF f=1MHz VB=0 Initial I/O isolation resisMinimum tance Riso 1,000MΩ 500V DC I/O capacitance *Turn on/Turn off time Input 90% 10% Output Ton Toff # Other types of products than the Cout (typ. 2.0pF) and Ron (A connection typ. 9.8 ohm) combinations carried in this catalog are also available. (There is a trade-off between Ron and Cout both cannot be reduced at the same time.) For more information, please contact our sales office in your area. ■ For Dimensions, see Page 441. ■ For Schematic and Wiring Diagrams, see Page 444. ■ For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 140 25 0.1 20 0.08 100 80 60 Turn on time, ms On resistance, Ω Load current, mA 120 15 10 0.06 0.04 40 0.02 5 20 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 549 AQY221N1S 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 2 0.08 0.06 0.04 2 LED turn off current, mA LED operate current, mA Turn off time, ms 0.1 1.5 1 0.5 1.5 1 0.5 0.02 0 –40 0 –20 20 40 60 0 8085 –40 0 –20 20 40 60 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 1.5 1.3 80 60 40 20 –3.0 –2.5 –2.0 –1.5 –1.0 –0.5 1.2 0.5 1 1.5 2.0 2.5 3.0 –20 Voltage, V –40 50mA 30mA 20mA 10mA 5mA 20 40 60 8085 Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Off state leakage current, A Current, mA LED dropout voltage, V 100 1.4 0 9. Off state leakage current 120 1.0 –20 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 1.1 –40 Ambient temperature, °C Ambient temperature, °C 0 0 8085 10–3 10–6 10–9 –60 –80 10–12 –100 –40 –20 0 20 40 60 –120 80 85 100 0 10 20 30 40 Load voltage, V Ambient temperature, °C 50 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 3 and 4 Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25°C 77°F 0.1 0.1 0.05 0 0.08 0.06 0.04 0 10 20 30 40 50 60 LED forward current, mA 0 10 14. Insertion loss characteristics (50Ω impedance) Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 0 10 30 25 1.5 Quantity, n Insertion loss, dB 40 1 20 15 10 0.5 20 0 104 550 5 0 105 106 107 Frequency, Hz 108 0 104 105 106 Frequency, Hz 50 Measured portion: between terminals 3 and 4 Continuous load current: 120mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F 2 60 20 30 40 Applied voltage, V 15. On resistance distribution 80 Isolasion, dB 1 0 20 30 40 50 60 LED forward current, mA 13. Isolation characteristics (50Ω impedance) 100 1.5 0.5 0.02 0 2 107 8.6 ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,, 0.15 2.5 Output capacitance, pF Turn off time, ms Turn on time, ms 0.2 9 9.4 9.8 10.2 On resistance, Ω AQY221N1S Load voltage: 40V(DC) Continuous load current: 120mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F 25 20 15 10 5 0 0 0.02 0.04 0.06 0.08 Turn on time, ms 9/1/2000 40 30 20 10 0 0.1 0 0.02 0.04 0.06 30 25 Quantity, n Quantity, n 30 50 Quantity, n 35 ,,,,,,,,,,,,,,,, ,,,,,,,,,,, ,,,,, 18. LED operate current distribution Load voltage: 40V(DC) Continuous load current: 120mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F ,,,,,,,,,,,, ,,,,,,,,,,,, 17. Turn off time distribution Load voltage: 40V(DC) Continuous load current: 120mA(DC) Quantity, n=50; Ambient temperature: 25°C 77°F ,,,,,,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,, 16. Turn on time distribution 20 15 10 5 0.08 Turn off time, ms 0.1 0 0 0.4 0.8 1.2 1.6 2 LED operate current, mA All Rights Reserved, © Copyright Matsushita Electric Works, 551 Ltd. Go To Online Catalog