DVMA28 Series HIGH RELIABILITY HYBRID EMI FILTERS DESCRIPTION FEATURES The DVMA series of hybrid EMI filters is operable over the full military (-55 °C to +125 °C) temperature range with no power derating. The DVMA EMI filter is designed to filter conducted emissions of two DVSA or one DVHF series DC-DC converters. • • These filters are designed and manufactured in a facility qualified to ISO9001 and certified to MILPRF-38534 and MIL-STD-883. • • • • • • • • • • High Reliability Wide Input Voltage Range: 0 to 50 Volts per MIL-STD-704 Up to 1.0 Amp Maximum Current 40 dB Minimum Attenuation at 500 kHz Industry Standard Pinout High Input Transient Voltage: 80 Volts for 1 sec per MIL-STD-704A Precision Projection Welded Hermetic Package Custom Versions Available Additional Environmental Screening Available Meets MIL-STD-461C and MIL-STD-461D EMC Requirements Protects Against Conducted Susceptibility Specified in MIL-STD-461C, CS01 and CS02 MIL-PRF-38534 Element Evaluated Components Figure 1 – DVMA28 EMI Filter (Not To Scale) 10013DSD 17921 Bothell-Everett Highway, Suite 108 Bothell, WA 98012 http://www.vpt-inc.com Sales Information: Phone: (425) 487-4850 Fax: (425) 487-4802 E-mail: [email protected] 1 DVMA28 Series SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Current Power Dissipation (Full Load, TCASE = +125°C) Parameter 50 VDC 80 Volts 1.0 Amp 0.16 Watts Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) -65°C to +150°C 300°C 15 Grams DVMA28 Conditions Units Min Typ Max Continuous 0 28 50 V Transient, 1 sec - - 80 V Continuous 0 - 1.0 A STATIC INPUT 2 Voltage Current 1,3 OUTPUT Voltage Current Continuous 3 VOUT = VIN – (IIN x RDC) Continuous 0 - Continuous - Continuous - NOISE REJECTION f = 500 kHz CAPACITANCE ISOLATION MTBF (MIL-HDBK-217F) AIF @ TC = 55°C DC RESISTANCE POWER DISSIPATION Notes: 2 V 1.0 A - 160 mΩ - 0.16 W 40 - - dB Pin to Case 13 - 27 nF Any Pin to Case, 500 VDC 100 - - MΩ - 3.15 - MHrs 1. Derate linearly to 0 at 135°C. 2. Verified by qualification testing. 3. Rated current applies at any voltage. BLOCK DIAGRAM PIN 1 PIN 2 28V IN 28V OUT PIN 3 CASE IN COM OUT COM PIN 5 PIN 4 Figure 2 10013DSD 2 DVMA28 Series CONNECTION DIAGRAMS DVMA28 EMI FILTER 1 DVSA2800S DC-DC CONVERTER 2 28V IN 6 28V OUT 1 28V IN +V OUT LOAD 28 Vdc 5 + 5 4 OUT COM 7 IN COM OUT COM 3 INH 2 IN COM CASE 8 Figure 3 – DVMA28 EMI Filter Hookup with Single Converter 10013DSD 3 DVMA28 Series CONNECTION DIAGRAMS DVSA2800S DC-DC CONVERTER 6 28V IN +V OUT 1 LOAD 5 7 INH OUT COM 2 IN COM 8 CASE DVMA28 EMI FILTER 1 DVSA2800S DC-DC CONVERTER 2 28V IN 6 28V OUT 1 28V IN 28 Vdc 5 + - 2 INH 5 +V OUT IN COM OUT COM 3 4 7 CASE LOAD OUT COM IN COM 8 Figure 4 – DVMA28 EMI Filter Hookup with Two Converters 10013DSD 4 DVMA28 Series EMI MEASUREMENT METHODS CONNECTION DIAGRAMS TO 50 OHM INPUT +V IN +V OUT 10 uF CURRENT TRANSFORMER TO D.U.T. 10 uF -V IN -V OUT Figure 5 – MIL-STD-461C Measurement Method (Feedthrough Capacitor) +V IN +V OUT 50 uH TO 50 OHM INPUT -V IN 50 uH -V OUT Figure 6 – MIL-STD-461D Measurement Method (LISN) 10013DSD 5 DVMA28 Series EMI PERFORMANCE CURVES (TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified) Figure 7 – MIL-STD-461C DVSA2800D Without EMI Filter Figure 8 – MIL-STD-461C DVSA2800D With DVMA28 EMI Filter Figure 9 – MIL-STD-461C Two DVSA2800S’s With DVMA28 EMI Filter Figure 10 – MIL-STD-461D DVSA2800S With DVMA28 EMI Filter 10013DSD 6 DVMA28 Series PACKAGE SPECIFICATIONS TOP VIEW SIDE VIEW PIN FUNCTION 1 28V IN 2 28V OUT 3 CASE 4 OUT COM 5 IN COM BOTTOM VIEW Figure 11 – Package and Pinout (Dimensional Limits are ±0.005” Unless Otherwise Stated) 10013DSD 7 DVMA28 Series PACKAGE PIN DESCRIPTION Pin Function Description 1 28V IN Positive Input Voltage Connection 2 28V OUT Positive Output Voltage Connection 3 CASE Case Connection 4 OUT COM Output Common Connection 5 IN COM Input Common Connection ENVIRONMENTAL SCREENING (Per MIL-STD-883 as referenced to MIL-PRF-38534, Class H) Screening MIL-STD-883 Standard (No Suffix) Extended /ES HB /HB • • Pre-Cap Inspection Method 2017, 2032 Internal Procedure Temperature Cycling Method 1010, Condition C Method 1010, -55°C to 125°C • Constant Acceleration Method 2001, 3000g Method 2001, 500g • Burn-In Method 1015, 160 hours at +125°C 96 hours at +125°C 24 hours at +125°C Hermeticity Method 1014, Fine Leak, Condition A Method 1014, Gross Leak, Condition C Dip (1 x 10-3) Final Electrical MIL-PRF-38534, Group A 100% at 25°C Final Inspection Method 2009 Note: 10013DSD 1. • • • • • • 1 • • • • • • • • • • • 100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment. 8 DVMA28 Series ORDERING INFORMATION DVMA 28 /HB 1 2 3 - XXX 4 (1) (2) (3) (4) Product Series Nominal Input Voltage Screening Code Additional Screening Code DVMA 28 28 Volts None /ES /HB Standard Extended HB Contact Sales Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental screening and testing, different input voltage, output voltage, power requirement, source inspection, and/or special element evaluation for space or other higher quality applications. CONTACT INFORMATION To request a quotation or place an order please contact your sales representative or the VPT Inc. Sales Department at: Phone: Fax: E-mail: (425) 487-4850 (425) 487-4802 [email protected] All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors or omissions. The products or specifications contained herein are subject to change without notice. 10013DSD 9