Stellaris® EM2 Expansion Board for Development Kits The Stellaris® EM2 Expansion Board (DK-LM3S9B96-EM2) from Texas Instruments is an optional expansion board which connects directly to the External Peripheral Interface (EPI) port of the Stellaris DK-LM3S9B96 and DK-LM3S9D96 development boards. The EM2 expansion board provides a transition between the Stellaris External Peripheral Interface (EPI) connector and the RF Evaluation Module (EM) connector. The DK-LM3S9B96-EM2 enables wireless application development using Low Power RF (LPRF), RF ID, and Bluetooth® evaluation modules on the Stellaris DK-LM3S9B96 and DK-LM3S9D96 platforms. The DK-LM3S9B96 and DK-LM3S9D96 development boards (each sold separately) provide a complete platform for evaluating the LM3S9000 series of Stellaris microcontrollers, featuring extensive connectivity options such as 10/100 Ethernet, Controller Area Network (CAN), Universal Serial Bus (USB) Full Speed On-The-Go, and Inter-IC Sound (I2S). Stellaris® EM2 Expansion Board Package Contents When combined with a DK-LM3S9B96 or DK-LM3S9D96 Development Kit, the EM2 expansion board provides the baseboard needed to develop and prototype wireless embedded applications. This package includes: Stellaris® DK-LM3S9B96-EM2 Expansion Board Stellaris® DK-LM3S9B96-EM2 Block Diagram Features The EM2 expansion board has the following features: 2 sets of EM connectors to support up to 2 RF evaluation modules 1 kilobit of I2C memory for storing configuration data and EM2 expansion board detection EM digital and analog audio signal headers EM MOD1 SDIO connection headers 32 Khz oscillator for slow clock source to primary Stellaris® EM2 Expansion Board Attached to DK-LM3S9x96 Development Board (sold separately) EM2 expansion board connector July 13, 2011 www.ti.com/stellariswireless DK-LM3S9B96-EM2 (continued) Optional Wireless Development Kits Available In order to develop and prototype wireless embedded applications out-of-the-box, Texas Instruments has also created a series of wireless development kits that combine a Stellaris® EM2 Expansion Board with other items as required to implement a full example of the featured wireless network. These wireless development kits focus on low power RF network type and a single protocol. Ordering Information Product Number Description DK-LM3S9B96-EM2 Stellaris® EM2 Expansion Board for Development Kits The DK-LM3S9B96-EM2 works with either of these two Stellaris Development Kits (each sold separately) DK-LM3S9B96 Stellaris® LM3S9B96 Microcontroller Development Kit (Tempest class) DK-LM3S9D96 Stellaris® LM3S9D96 Microcontroller Development Kit (Firestorm class) Stellaris® Wireless Kits (each sold separately) DK-EM2-2500S DK-EM2-7960R DK-EM2-2520Z DK-EM2-2560B Stellaris® 2.4 GHz SimpliciTI Wireless Kit (includes CC2500 Evaluation Module Kit and DK-LM3S9B96-EM2 Expansion Board) www.ti.com/dk-em2-2500s Stellaris® 13.56 MHz RFID Wireless Kit (includes TRF7960TB Evaluation Module and DK-LM3S9B96-EM2 Expansion Board) www.ti.com/dk-em2-7960r Stellaris® 2.4 GHz ZigBee Wireless Kit (includes CC2520 Evaluation Module Kit and DK-LM3S9B96-EM2 Expansion Board) www.ti.com/dk-em2-2520z Stellaris® 2.4 GHz CC2560 Bluetooth® Wireless Kit (includes CC2560 Bluetooth® Transceiver and DK-LM3S9B96-EM2 Expansion Board) www.ti.com/dk-em2-2560b For more information on Stellaris wireless solutions: www.ti.com/stellariswireless Texas Instruments • 108 Wild Basin, Suite 350 • Austin, TX 78746 http://www.ti.com/stellaris Copyright © 2010–2011 Texas Instruments, Inc. All rights reserved. Stellaris and StellarisWare are registered trademarks of Texas Instruments. ARM and Thumb are registered trademarks, and Cortex is a trademark of ARM Limited. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Texas Instruments is under license. Other names and brands may be claimed as the property of others. PB-DK-LM3S9B96-EM2-02 July 13, 2011 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee® Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated