SPECIFICATION NO.:QB/SPS 73 PS 1068A 4.ABSOLUTE MAXIMUM RATINGS Ta=25℃ PARAMETER RED Green UNIT Power dissipation per segment 60 mw Peak forward current per segment* 80 mA Continuous forward current per segment** 15 mA Reverse voltage per segment 5 V Operating temperature range -35~80 ℃ Storage temperature range -35~85 ℃ Solder temperature 1/16 inch below seating plane for 3 seconds at 260℃ NOTES: * 1/10 duty cycle 10 mes pulse width ** We advise average forward c urrent is 15mA 5.ELECTRICAL/OPTICAL CHARACTERISTICS ITEM Luminous Intensity Peak Emission SYMBOL IV λP Wavelength Spectral Line Half-width Forward Voltage per segment Reverse Current per segment Red Green Red Red Green VF IR RATING CONDITION Green △λ Ta=25℃ Red Green IF=20mA IF=20mA IF=20mA IF=20mA UNIT min typ max — 30 — — — — — 640 — — — — — 35 — — — — — 1.85 2.0 — — — Red VR=5V — — 50 Green VR=5V — — — mcd nm nm V μA 6.CAUTIONS: a)When being used, do not be over the corresponding limited scale and note in our specification. b)For some products with the static electricity mark, please operate refer to the rules of static electricity fence. c)When designing, please consider the factor of heat, and taking keep away measure to avoid high temperature. d)Do not clean the product with organic impregnant as some of them may damage the product. 3-3