(1/2) 001-01 / 20011102 / e532_rlf12560.fm Inductors RLF Series RLF12560 Type For Power Line SMD Accompaning large current power supplies, these inductors have secured efficient characteristics by improving its magnetic circuit based on existing products. These products meet resistance reducing and current enlargement. PRODUCT IDENTIFICATIONS FEATURES • Comparing with existing products(RLF12545), DC current superimposition characteristic have improved. Especially, inductance rises about 10% in spite of high temperature at 100°C. In addition, inductance have risen about 30% at normal temperature. • Using flat-squere wire for winding, that is rising space factor, these inductors can reduce current resistance and suppress calorific value. • Forming internal gap, their structure suppress outgoing magnetic flux leakage. • Completely Pb free for both inside of products and terminal electrodes. (1) Series name APPLICATIONS • Choke coils in power circuit of personal computers, crystal liquid television monitors, set top boxes, amusement equipments, etc. RLF 12560 T- 1R0 N 140 (1) (2) (3) (4) (5) (6) (2) Dimensions L×W×T 12.5×12.5×6.0mm 12560 (3) Packaging style T Taping(reel) (4) Inductance value 1µH 10µH 1R0 100 (5) Inductance tolerance M N ±20% ±30% (6) Rated current 8R2 140 8.2A 14.4A SPECIFICATIONS Type RLF12560 Operating temperature range Storage temperature range [Including self-temperature rise] [Unit of products] –20 to +105°C –40 to +105°C RECOMMENDED REFLOW SOLDERING CONDITIONS 10s 260±3˚C Natural cooling 230˚C min. 165±15˚C 120s Preheating 30s 120s min. Time(s) • All specifications are subject to change without notice. PACKAGING STYLE AND QUANTITIES Packaging style Taping Type RLF12560T Quantity 500 pieces/reel (2/2) 001-01 / 20011102 / e532_rlf12560.fm Inductors RLF Series RLF12560 Type For Power Line SMD SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Terminal electrode 12.8±0.5 7.5 3.2 4 3.5±0.2 100 3.5±0.2 12.5±0.5 3.2 Dimensions in mm (7.8) Winding start mark 6.0max. 2.5±0.2 2.5±0.2 ELECTRICAL CHARACTERISTICS Inductance (µH) Inductance tolerance (%) Test frequency L (kHz) DC resistance (mΩ)±20% 1.0 1.9 2.7 4.2 5.6 7.8 10 ±30 ±30 ±30 ±30 ±30 ±30 ±20 100 100 100 100 100 100 100 2.8 3.6 4.5 7.4 8.5 10.2 12.4 Rated current(A) Based on inductance change 18.5 max. 15.6 max. 14.4 max. 10.2 max. 9.7 max. 8.2 max. 7.5 max. Based on temperature rise 14.4 typ. 12.7 typ. 11.5 typ. 10.0 typ. 9.2 typ. 8.4 typ. 7.8 typ. Part No. RLF12560T-1R0N140 RLF12560T-1R9N120 RLF12560T-2R7N110 RLF12560T-4R2N100 RLF12560T-5R6N9R2 RLF12560T-7R8N8R2 RLF12560T-100M7R5 ∗ Rated current: Value obtained when current flows and the temperature has risen to 40°C or when DC current flows and the initial value of inductance has fallen by 50%, whichever is smaller. • Test equipment Inductance: YHP 4194A IMPEDANCE GAIN/PHASE ANALYZER, or equivalent DC resistance: DIGITAL MILLIOHM METER VP-2941A MATSUSHITA, or equivalent TYPICAL ELECTRICAL CHARCTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS Test circuit L=0.1H C=20000µF A LX 100M 7R8N 5R6N 4R2N 2R7N Inductance(µH) 1R9N 1R0N 1 0.1 0.1 1 10 DC current(A) • All specifications are subject to change without notice. 100 LCR meter 10 MEASURING CIRCUIT